Idoing Android Head Unit Installation on WRX STI

[@Anonymoose0913]

Dude your an absolute wizard and this has been monumental in helping me plan out my audio setup in my 20’ STI. Thank you so much for making all of these audio related videos.

[@jtme411]

2015 STI install notes: (appreciated your video very much! I just installed one and thought I would share a couple notes) The bezel is very fragile, I had to drill (open up) the 4 HVAC module holes otherwise they can crack and break using the OEM screws. The top part is even more fragile, I removed the part that holds the hazard and MFD toggle button in place and installed that just prior to final hookup. My first bezel was broken on the top two screw attachment points. Also, to be clear you need to use the OEM antenna. I did not use the iDoing supplied antenna cable. Lastly for 2015 users if you do not care if the reverse camera remains in the MFD and not displayed on the iDoing then just skip that harness all together.

[@Bidomsurge]

This was so helpful. Thank you sir. Great video as well!

[@thrillingd]

Noticing our main connections are different. I only have 2 as opposed to his 3. Hoping this install goes easy

[@Augie..]

Is there a video or tutorial on how to get the 2015 backup cam to display on HU, even if it displays both. I know you plug some harness into the MFD somewhere but No clue

[@chriswade3986]

I can’t figure out how to get the camera on the screen

[@chadhaslett1818]

I did see one somewhere about how to do that, you need another wiring harness adapter to do it. I'll look around and see if I can find it.

[@chilump]

This is hands down the best video on installing this head unit that I have seen. I just purchased one and it will be installing it this weekend I feel super confident now

[@activeej8858]

How did it go? Smoothly?

[@fincity1964]

Thanks for making this video. One of the best, if not the best in describing the different wiring harnesses. I'm installing an Idoing unit in a 2013 Camry this weekend and frankly, I'm disappointed in the lack of instructions and bad videos out there. Good job!

[@mattbarkley1]

Is installing the microphone needed? I believe there is a microphone on the head unit.

[@pacemetalfab]

The video is hands down the most thorough and well thought out one I have watched. Thank you for taking the time to produce this video !!!

[@MiguelSevilla]

Hey man, just wanted to thank you for this super thorough install. Literally plug-and-play with your detailed video. The only issue I had is with the backup camera not working initially, but it was a matter of just pushing the OEM connector all the way in. Anyways, dope vid!

[@huhinteresting]

Did mines today and followed his vid too! I also happend to have an issue with the reverse cam and I still havent figured it out. Which one is it?

[@MiguelSevilla]

@@huhinteresting It's been a while so I don't recall, but for me the issue was that one of the connectors was not all the way in and it wasn't obvious until I rechecked all my connections. Follow the tutorial in the video and make sure all the connectors are all the way in.

[@daviddavidsonn3578]

7:19 I have the same GPS antenna, I fixed it above the glove box, inside the dash. It works perfectly fine and is absolutely invisible.

[@samueln3630]

Thank you. I didn't want to remove the top covers.

[@cjporteous29]

Absolutely superb video, since this unit doesn't come with instructions they should pay you for this detailed video it absolutely helped me with my rear camera mix up like you described. Thank you and keep making great videos

[@josenoguerasjr.6873]

Angel! You got a shout out on Schmeedia video on this. Out here making it.

[@akqjtn]

Yeah just saw, thanks for the heads up! I'm fixing to start back up with my own channel (been retiring from the CG so haven't had much time). Hope all is well with fam!

[@zhodge0]

Good install. And your side notes are helpful. I always say, 'Don't force it... if you are having to force it, something is wrong'.

[@turtle4lif367]

Are you going to post a video about your amplifier installation? Are you skipping the existing speaker wire going to the doors? im very interested in doing the same

[@Kradle]

Appreciate the solid install tutorial bro. I just finished installing mine. Dumb mistake I made was, the 1 spot I didn't tape, I put a tiny gouge in. Oof. I ran the dual USB to my glove box but neither of the USB cords are working or some reason. Not even charging anything. Maybe the USB connection came loose on the HU. MIght pop it back out on a later date and check that. I also picked up the Metra adapter to retain the center console usb. It goes idoing usb -> metra -> car center console usb. Overall, getting the 10mm bolts out was the hardest part for sure. I used a magnetic 10mm socket - made it much easier to not drop bolts. I got lucky and my model didn't have a starlink module. Mine's a 2016 base with base sound system. It also had the backup cam integrated into the 28 pin.

[@collinwalburn5422]

appreciate that you actually took the time to explain all the cables and their uses! very informative, thank you!

[@quietguy6562]

Thank you, thank you, thank you!!! You did a great job of explaining the extra cables and which ones I wanted to use. I pulled the old unit out and was perplexed with the extra cables, so I put it back together. Now I’m confident I can complete the install.

[@dennisyu6230]

What a great video, thank you for the information and details you put in this video. So many KZbin video's out there showing how to install these Android units but never explain in this simplified way. Thank you!

[@TK-es3jl]

Boost & Shutter, excellent vide as always and super informative! I'll share my experience with a similar (Joying) unit as for the antenna. The plugs provided by this and other aftermarket radios assume the power for the antenna is from the actual antenna connector, it is NOT. Power for all versions of the factory radio antenna is actually from the i35 connector on pin A8 (yellow). I found this out from both my Joying unit and Kenwood radio using the idatalink kit. Both had horrible stereo reception, I eventually found this out using the Service Manual for my car (2019 WRX) and looking at the wiring diagrams. Once I powered the amplified antenna via the correct pin/connector reception was back to normal. I have (had) the base radio but I checked the other versions and they are all the same. Hope this helps!

[@earlj3638]

Good tip, thanks! I’m planning on installing my Joying head unit this weekend. Joying seems to get mostly good reviews, but hardly any specific reviews for WRX/STi version

[@brittanysmith4931]

Have you figured how to make the stock microphone work with the unit for taking calls?

[@Crypticeuphoria]

How do you get the usb under the headunit console to work ?

[@gabrielraneses2654]

Thanks for the detailed steps. My only issue with my install is lining it up. It's either the top is short to the bottom. cant get both to fit properly. any advice? Thanks!

[@Bwolfson6]

Did you ever get it lined up? My 2018 is running into the same thing

[@gabrielraneses2654]

Sorry for the late reply. Yes I was able to by pushing both sides with a little bit of force. Started from bottom and aligned the top and push both sides in.

[@bradwinter7028]

Ya I struggled with this when trying to finish it, I found multiple posts on the issue saying you just had to give it a bunch of force to push it into place. Once I gave it more force it popped right in

[@OkamiOni]

Thank you for the video!! You majorly helped with my installation. You have the best iDoing installation video by far!!

[@ragnarocking]

I don't even own this stereo or car but I know I will be referencing your videos when I replace my Crosstrek's radio with a Pioneer soon. Thanks for the upload!

[@furykillerBZ]

Thanks for this guide; it was super helpful in getting my installation done. I actually used everything except the dual USB and the extra amp harness. Everything is working except for the mic, for some reason it doesn't pick up anything. Did you have the same issue?

[@hectorvidal5757]

Hi, can you help me? I'm interested in buying the radio, but I have a question and does it keep the 2 original USB ports or are there cables left in the glove box?

[@luism3188]

Hey sorry for the super late replay. No it does not. I learned this the hard way but it provides with new USB cables

[@cmd_76]

Love the step by step instructions. Great install. I have a 2021 STI with Harmon Kardon speakers. Will this unit work on my car?

[@akqjtn]

I'm asking Idoing about that to make sure I don't give you guys false info. I'll pin the comment when they respond.

[@1ledp621]

@@akqjtn they now have one that supports the Harmon Kardon speakers

[@tommylevasseur3921]

They answered yesterday, you need an extra CanBus that makes it works. I’ll post the link they sent me!

[@sanjaythoppil7213]

Thanks!

[@akqjtn]

Thank you for your tip. Much appreciated!

[@alexsandwichmateo3849]

Awesome video. I want this head unit. The only thing I don’t like is wiring for the GPS and Microphone. I’m not sure how to hide to wires. I saw where you put them but can’t figure out exactly how. Seeing those wires would drive me nuts. Still debating to get this or not.

[@danlapetina7362]

Hi, at 16:48 you didn't plug in the green wire to starlink. I just installed the idoing in my 2021 Crosstrek and I'm unable to plug one of the starlink wires in. One of the connection wires comes out the back of the OEM radio where it connects to the starlink module. It appears the idoing radio doesn't have that connection, so now getting emails from Subaru telling me something is wrong?

[@zipit0322]

I’m having the same issue. I believe it’s the blue connector not being connected that’s causing the issue… I have no idea how to fix it either.

[@danlapetina7362]

Hi Keith, it's not going to work. I went back and forth with an idoing customer service representative and they kept insisting this will work with my 2021 Subaru Crosstrek Sport. After the 7 or 8tu email the representative sent me a picture of a Crosstrek OEM radio and the starlink module only had 5 connections. The two are large and the 3 smaller. On my starlink module it had a total of 6, the 2 large and 4 smaller connections. To make an already long explanation short, Subaru has changed the starlink module. It now routes a connection from the OEM radio to the back of the starlink module. I don't know if it's happened for 2021? I simply don't know, but idoing didn't know. I had to return mine and now in hopes of getting my money back.

[@zipit0322]

@@danlapetina7362 ahhhh ok yeah that makes sense then. 🤷🏼‍♂️ oh well. Thanks!!

[@rubensanchez4408]

Great Video man! I like that you went through and explained what each cable does. I ended up getting another brand off amazon and they did not send the correct wiring harness. This unit looks way easier. I may have to get this unit instead.

[@akqjtn]

Glad you enjoyed. Thanks for dropping by.

[@benunger7687]

I successfully installed this on a 2018 Subaru. However the electronic parking brake light is on all the time. How do I get it to turn off? I read that I need to ground the break wire from the Idoing unit. That's not working.

[@munnkaman]

2017 WRX and I just installed the head unit. Everything works except I can't change the volume or skip songs. There were some connectors that didn't have any place to go but every other feature works fine. Android auto, reverse cam ect

[@seanfu8688]

Do we not use the old bolts that held the stock head unit anymore?

[@Dadylongarms]

You make the best videos! Extremely detailed and direct. Everything you need to know to do a full install. Hope to see you soon. Saw what happened on IG. Blessings.

[@jakesternmusic]

Thanks for the video, it’s been very helpful and informative. I just finished installing mine and it’s great! One thing though, you didn’t mention the 2 additional 10 millimeter bolts that need removed from the sides. There is one behind the glovebox to the left, and one down under the steering wheel and to the right. Recommend to use a magnetic 10mill socket and an extension on both. 🤘

[@MadMitch32]

Do you happen to know the voltage output of the preamp outputs for the iDoing? I didn’t hear you mention it in any of your videos and couldn’t find it online either. Thanks for the help!

[@Subiewrx19]

thanks for the video this really help me out just got done today with my Idoing Android head unit with carbon fiber for my SUBARU WRX 2019 👍

[@spinster4000]

Been doing lots of research lately about headunits and what to get/how to do it. I sold my old 2006 ranger that I had upgraded with the BOSS audio BE7ACP head unit and its amazing, I loved it. And as it turns out apparently this exact head unit can fit my 2016 WRX but i'd need a ton of wires and connection kits to actually install it. Which I might end up doing, but this iDoing setup seems to be the easiest-hassle free setup out of everything I have looked up. You have any thoughts? Keep the BE7ACP and get the kits to make it work as the old one did or just scrap it and get the iDoing?

[@velocityr6524]

This video deserves more likes!!

[@Victory_Venture.]

great vid. Followed everything but im getting no sound from my any speaker ? Any tips on how to fix

[@jasonp.3966]

great video helped out a bunch. Only issue i have is the front speakers only have bass coming from them. Any help?

[@anthonyalava2478]

Where do we connect a aftermarket USB adapter harness to be able to use the center arm rest 2 USB ports? Thank you!

[@MrBubba123bubba]

This is one of the few install videos that get the actual clipping of the plastic bezel in with no problems. One video the top wasn't even clipped in. Since the stock bolt in brackets aren't used that would not be very safe. I assume you aligned all three at the same time before pushing it in?

[@NN13K0]

Here are some tips for putting in the head unit: 1) Make sure the inside is clear so no wires/harness is in the way when you push the head unit in. 2) Align the top clips around the vent bezels first. 3) Once they are all in, place a hand on the surface at the top to keep the clips down and in place while taking your other hand and pressing in the clips at the very bottom. You will have to slightly bend (I know that sounds scary but it's not actually bending the unit) to make sure the bottom clips are aligned in the correct position. 4) After the top and bottom clips are aligned, gently push in the sides of the head unit to pop everything in place. Gently press all around the top, bottom, and sides to confirm it's all in.

[@arjungopal99]

Thank you for the detailed explanation. This is a great tutorial. I just have one question: I have a 2021 WRX with and I’m planning on getting iDoing unit and after market audio system. What cable should I use to connect amp ignition?

[@gregthatcher4071]

Hey I am installing the idoing head unit into a 2020 WRX and am getting a "no signal" for the reverse but I did attach the 5 pin connector as you showed in this video. Do you have any suggestions?

[@NN13K0]

Make sure that camera pin is connected in the correct spot. For this one, you could mistakenly connect it to one other area. If you are looking at your idoing head unit from the back of it (hard to do when it's already partially installed, I know), the place you want to connect it is in the UPPER RIGHT area (should be a black area). Try that :)

[@jessh107]

Did you ever get it to work? I am having the same problem, and I installed it as in the video.

[@jobob3854]

Add me to the list. Anyone ever get this resolved? Idoing had me send the unit back in for a refund. Never received the refund. Repurchased through a US supplier and the same problem is present.

[@briana.influentialworks5533]

Can you show how you routed your mic and usb? I’m trying to figure out my placement for the usb and how to place my mic in a good spot

[@dougcastle1785]

Most definitely want this unit. My stock one volume knob does not work and it tends to be off sync with my phone.

[@jonathanchavez4007]

Any info on steering wheel retention

[@akqjtn]

Thats in the review video

[@iBoost13]

Looking forward to part two!! I just installed mine a week ago wondering what would be best EQ settings for sound

[@jasonmccleary4782]

Do you need to plug in the microphone to have hands free through the factory speakers or is that microphone just if you never had the hands free through speakers in the first place?

[@jamesmendoza2405]

Great video!!! I purchased an Idoing and I have had it for months now however I’m running into an issue with the blue tooth microphone no one can hear me when I try to talk to them. Any ideas?

[@migstig8023]

thanks bro!!! best step by step on YT.

[@marcopagas3880]

Do I need the gps wire installed or can I just use my phones gps? Is that still relaiable

[@freddy_flexx5771]

Bro thanks for just taking the time to explain everything

[@ilukac]

any reason to not get the databus adaptor so you can use the subaru usb ports? Running to the glove box seems a bit hack, no?

[@sergiopantoja181]

I have a 2019 WRX and was wondering if there is anything you can tell me about the CAN BUS decoder. Does it need to be installed?

[@hybd_goose1048]

Where does the canbus go exactly?

[@SUp3RpooP3r7698]

@Boost and Shutter - Just got one for my STI and had a pioneer in there before. That one never really worked properly and when I took it off the previous owner has got all kinds of different wires spliced and harness' etc.. I have those 2 grey connectors for the telematics unit, but there isn't one on this current unit. Does that mean I need to purchase a new telematics unit for it to work properly?

[@Kidney_Thief]

Does the unit have a menu item for GPS signal?

[@RidinOnRails]

sidebar question: what is that mount to the bottom, right of headunit ? i dont like the positioning of the pro clip phone holder.

[@808Alejandro]

Whats the difference between the 4g-64g and 8g-128g one?

[@TheRealOneEyeGaming]

Nice video ! Unfortunately I haven’t been able to figure out how to get my reverse camera working. I’m trying to use the factory camera

[@AnFu2]

Hi, maybe this is a long shot, but non the less... I have a 2011 legacy that already has a BT connectivity with the phone for calls (I presume the newer models have it too). Do you still need an additional microphone, or is the one already built in the car enough? Thank you.

[@Striz23]

I did exactly what you did especially with my telematics, still getting no audio from my front speakers only bass, could it be a faulty head unit or canbus?

[@robertugalde758]

Boost & Shutter what phone mount is that by the ac gauges ?

[@jtme411]

Looking for an answer on this as well!

[@luiscordero8944]

Thank you for you detail video. I never heard of this brand. Thank you again

[@z71tina]

Is there a head unit that will use the factory microphone?

[@jeeyahnbrah3510]

can a 2017 wrx with no karma speakers purchase this product?

[@MR-oy4fc]

Got everything hooked up along with the starlink unit but my front speakers don't work. Any ideas? Base model 2019 STI

[@inmynikes28]

Hello. I was wondering if there was a spot to plug the oem kicker subwoofer? Didn’t see this mentioned? Great video, trying to tackle this myself.

[@Javyruiz]

Did you ever figure this out? Is there one? I’ve been thinking of pulling the trigger on this HU but still skeptical

[@inmynikes28]

Yeah there’s like a splitter/adapter where you can plug in the sub then plug into the head unit

[@andyzimmy1110]

I just installed this head unit and everything works great...but now my my three dash buttons won't work is that something to do with the head unit?

[@StealthShadowFox]

Does android auto work without a cord being connected? 21 sti

[@andrewlakshamalla2479]

Hey there, how has the head unit held up over time? Any updates?

[@Supremeleader6969]

Okay so I have everything connected and I have an iPhone but when connecting to Bluetooth no music is being played, I doubled checked to make sure all connections were tight and they are so what is my problem?

[@85WD]

I appreciate the work you do brother, thorough and straight to the point.

[@eacalways]

How is the car play?is slow glitchy?

[@Juanparrastudio]

Awesome video! Bro I will install kicker oem speakers on my STI. Will this head unit Amplify those speakers?? If so how many watts per speaker? I was between doing this or just leaving STOCK head unit and installing ALPINE INLINE AMP to it to amplify kicker speakers… So I want to know which route would be best?? And as far as SOUND quality which is better… Thanks!

[@victorbrambila9187]

I have the Harman Kardon version. After install I noticed the parking brake light stays dimly on when the brake is not engaged. Others have had this issue as well but I can’t find the reason. Do you happen to know?

[@olivierbourassa1444]

why the rear rca are written ( SL and SR ) and not rear L and rear R ? The front are written good but not the rear?

[@banianpolepalogan7067]

Great video. I’m planning to change my OEM whole system. In my STI 2021 base model! Ordered already OEM kickers,tweeter,speaker,subwoofer. Is the USB,AUX in the center/arm rest still gonna work if I’m goin to idoing headunit?thanks

[@collincelestine8502]

This vid is perfect 2020 STI here too. Would you recommend cutting and shortening the wires you don’t need and wrapping them with electrical tape to create more free space back there?

[@tylerv4623]

Just unpin them from the connector with a pick so you can add them back if you need to.

[@erichmonteith8253]

You mentioned that you were not going to install the 4g antenna and sim card, but you installed the GPS. Why did you install that?

[@86309]

what would happen if you dont install the microphone? doesn't the car have one already to pick up your voice for hands free calling?

[@holyjellyx7758]

Can you still use the USB connection in the armrest? Thanks

[@akqjtn]

No, those USB connections are seen as a hub to head units so they don't work.

[@CHILL7603]

Great video ... Question I installed the Idoing Head Unit in my 2017 WRX that had Harman Kardon and unit works but the speaker output sound is louder on the front Passenger side. If i change the field and shit to each corner of the car its softer on driver front and rear and passenger rear but way louder on the front passenger.. Any idea's why ? I reached out to idoing and they said they had no idea

[@TSalad_Bowl-uy7ci]

Is there a way to retain oem usb and s Aux ports on a 2020 wrx sti?

[@MrCheifed]

Getting no sound out the rear speakers with this new head unit

[@reverseredd5000]

The harness plug on the right side onto the bottom row the big one doesn’t fit with my stock harness to the idoing stereo ? All the other ones fit expect that certain one.Will I need a adapter or a replacement harness ?

[@zr0z]

How is the microphone quality? I've heard on some forums of people buying other mics and using the IDoing port because the mic included is pretty bad.

[@akqjtn]

No problems at all. Idoing told me they replaced the old mic so new units should not have issues.

[@danalihd]

Which wires are for steering wheel controls?

[@Sxnti4k]

Man I know this is 2 years later but I have a 2018 Subaru WRX limited and my front door speakers are not working they just sound muffled out I don’t know what I did wrong or why it is doing that !

[@Sxnti4k]

After further review I have seen you said if you have the telematic unit you don’t get front audio I do not need the telematics unit what else does it control ?

[@Sxnti4k]

I do not need gps tracking or starlink could I just not run that box ? Or do I “have to deal with it”

[@Sxnti4k]

It’s currently connected and I do not have front audio I’m stuck

[@dharp7831]

I feel like i missed the part where the back up camera comes into play… i dont have my backup camera now any advice ?

[@mr_narto]

I have a levorg 2016 and I can't get any sound from my front speakers, but I dont have the telematics unit. The settings are as they should. I dont know what I should do. Please help.

[@Kidney_Thief]

Did you have to remove any of the dash under the steering column to access the 10mm? Did you do a test on the double USB?

[@salvadorcarrillo3042]

Do I still need to connect the mic harness even though I’m not going to use the external mic provided?

[@derrickcharles4208]

How much are these delivered to the UK? And the best place to purchase them?

[@jeahya22]

Why wouldn't you need the ground wire? Whoever installed mine did it in a way that whenever I touch the screen, I ground it and static goes away. Not good unless you're always touching it.

[@miGz325]

Just to confirm. I don't need to use the pre amp output cables on Harman Kardon system, correct? Thanks!

[@jetman7711]

Great video and way helpful. I have a base 18 STI and the speakers sound like garbage. Does this unit help with sound at all? I’m not wanting to upgrade all the speakers yet. Main reason for getting a new unit is for CarPlay. That’s for all ur great videos man.

[@chadhaslett1818]

Sound is 100% better just by changing the head unit.

[@ericbulic8589]

I installed this on my base 17' WRX. I have a 10 inch sub and amp in my trunk but am not getting any signal to my sub. Any idea on where I may have messed up? What should I check first?

[@zefrchao3232]

Hi, I had the headunit installed, but I'm getting a check system audio warning every time I start up the car, do you have any advice? Thanks again!