Mercedes CLK W208 E Class W210 Non Bond Pixel Repair Instructions

Mercedes CLK W208 E Class W210 Non Bond Pixel Repair Instructions.
Non Bond Mercedes pixel repair ribbon available at www.akspeedo.com/ only £14.99
Easy fit no soldering or heat bonding involved simply tape down into place, and will never fail again!
Just use 12mm clear scotch tape we have use yellow colour tape as it is easier to see in the video.
Thanks for looking www.akspeedo.com/

[@markschembri8098]

I've just installed the repair kit in my 208. Take your time and clean the contacts as described, ensure the ribbon is aligned carefully on the LCD. Fantastic kit. Thanks for the making it available. My cluster looks brand new!

[@akspeedo]

Thanks for the feedback, cheers www.akspeedo.com/

[@anotherhumanbeing9929]

The yellow tape looks like Kapton tape, used on military and avionics.Stable up to 750F.

[@paulk3176]

I think he might have mixed up the left & right side when explaiing the circuit board contacts glue cleaning off with acetone. Mine had gray gunk on them before cleaning, and after cleaning came out really nice gold color. This makes more sense.

[@larryhayes1446]

Excellent video thank you. I have a W210 2001 E320 that needs this

[@kd45914]

Did you do this yet?

[@francoissohier6046]

Thanks a lot for having shipped the ribbons so fast, thanks a lot for your very detailed video, i fixed my dash instruments in one hour and i am so glad that it works again!!! Regards

[@akspeedo]

No problem glad to help, please spread your good news with other Mercedes owners, cheers www.akspeedo.com

[@jayr.martinez4983]

Great video, thank you for your efforts. It would have been nice though to have seen how to place the markers back on, and have shown how to take them all off.

[@akspeedo]

Jay R. Martinez Full back up support by phone or email after purchasing ribbon kit from our website www.akspeedo.com/ Thanks for your feedback

[@MichalZ78]

hey guys, how do you power the unit when it's outside the vehicle ?

[@ivodepoorter263]

Michal Zdunek a

[@tsxalex8370]

+ivo de poorter b

[@lippmann888]

Hi. Impressive lessons, I have a w209 cabriolet, there is no Time and Date setting on the odometer menu. But the clock is ticking. I send into garage also no help. Any idea or parts I need to change ? Thanks a million. Chan

[@lippmann888]

Further to my last question. The back light on RPM is off, is there any parts to replace ? Thanks again.

[@suzukicappuccino]

Got your ribbon kit - very fast postage and worked fine after I realised it wasn’t the sticky tape that helped make the contact but the pink rubbers on the dash parts pressing against it :) My dash bulbs are a bit troublesome - didn’t work in some spots, so I replaced them - still didn’t work but came to life and stayed on properly after a drive... any reason why they might do that?

[@akspeedo]

Are the bulb connections clean? Try a new set of bulbs, cheers

[@WorldHK]

Can I use tape for original ribbon cables too or it is just the ones that you are using that are suitable with tape?

[@akspeedo]

You need to replace the ribbon cables with the ones available on our website www.akspeedo.com/

[@dizzydellz7438]

Wow my 2005 Mercedes Benz e320 was running and driving great them one of my low beam lights went out so I went to AutoZone got the bulb and changed it myself then shortly afterwards the lights on my instrument cluster went out now at nights I can't see the instrument cluster so is this a fuse problem with something electrical or do I have to change out the entire instrument cluster?

[@Osst]

Aren't they supposed to be heat pressed on not stuck on with a tape?

[@akspeedo]

Our ribbon cables are non bond, fit as video, work perfect, Cheers James

[@wviti64]

Can I ask you what sticky-tape or glue should be used to stick down the cable-tape, for both ends? I cannot see how just sticky tape can hold down the wire-tape when there is significant vibration and hot-cold conditions potentially dislodging it. Thanks.

[@akspeedo]

The connection is made with pressure from the two pressure pads, affectedly making a sandwich once clipped together, the tape just holds the ribbon cable in place till that point. Cheers www.akspeedo.com/

[@MrMarco6900]

Very nice!!!!

[@Alain.Helstroffer01]

Attention, même si elle est très utile, cette vidéo simplifie au maximum les phases de montage-démontage... Sans que ce soit impossible (je viens de le faire), ce n'est pas si simple... Il faut être très méticuleux.

[@akspeedo]

Alain Helstroffer If you are requiring any help fitting our ribbon kits call or email our UK office on 441786 476760 thanks www.akspeedo.com/

[@jeandeluc7003]

+Alain Helstroffer Où puis je trouver les nappes pour la montre et la sonde de température? Merci

[@LitaroRizo]

I can't see electric track on the lcd after use the card. How can i do?

[@whistlesz]

How did you so easily pull off the black lcd cover? Mine will not come off on the smaller lcds.

[@akspeedo]

3 catches at the back of the 2 small screens 4 behind the main screen, cheers www.akspeedo.com/

[@abayomiabi]

Wow great job. How much will you charge to fix mine ?

[@dave11674]

Hi pinouts for speedo to test on the bench please

[@TheStevesoul]

Hi! I will buy 1, but i want to know the twisting directions when repair. I see speedo twist left, fuel twist right, and temperatur and tacho which direction? Thanks

[@akspeedo]

TheStevesoul All the same apart from fuel

[@sideup4680]

how turn on lcd without put this in a car?

[@arianfaravar734]

Hello. I recently sent a mail to you. Glad to also see you here. I have a 2004 mercedes benz viano. sometimes the display works properly but sometimes it's doesn't have enough light to read the data. Do i have to change the whole display? And if i do, is the part going to match my vehicle? And also, Do you ship to Turkey?

[@yusifovemin]

Thank you for Video.. I would like to know about CLEAR SCOTCH TAPE... Can i use Double Sided 3M Clear Acrylic Foam Tape ?? I am waiting answer

[@akspeedo]

No just one sided tape, cheers www.akspeedo.com

[@clevecummins9925]

I clean the contacts on mine(w210 2002 e320) using acetone but they remain gold.are they suppose to be gold or silver?

[@akspeedo]

cleve cummins Gold is perfect, but if they go a little silver they will be OK.

[@beaucauchemar]

I attempted this but had an issue with the needles not positioning correctly when reinstalled. I managed to get them to a point of relative accuracy, but the speedo now jumps in increments (at various speeds) rather than a constantly fluid motion. Any idea what could be causing this? The needles had no prior issues.

[@akspeedo]

James Battaglia Hi, if you have ordered one of our kits please email us for advice, thanks www.akspeedo.com/

[@beaucauchemar]

akspeedo I didn't purchase one of your kits so if you are unable to help me then I understand. The issue, however, is simply with the reinstallation of the gauge needles. Have you experienced any similar issues?

[@MichalZ78]

James Battaglia had the same issue, take them out and reinsert the needle gently, you pushed it in too far ! worked for me, just be gentle when pressing the needle back in ! that should fix it !

[@clevecummins9925]

Do you sell the middle lcd display with ribbon attached for a 2002 e320 W210? I did not see it on your website just the on for the 203.

[@akspeedo]

cleve cummins No sorry, the problem is getting the little driver chip that is on the main screens ribbon cable (no longer made).

[@citizenoftheuniverso]

This question might have been answered already but just to be clear. Did you disconnect the battery before removing the cluster?

[@akspeedo]

Citizen of the universe No, leave the battery connected, Keys must out of the ignition.

[@HarrySingh-gb6ex]

akspeedo Hi, I forgot and left my key in ignition when I plygged the unit back in. Nothing works. Is there anything I can do to "reset" it?

[@akspeedo]

Re This would not have killed the dash, sounds like you have not reconnected the plugs on the rear of the speedometer correctly. Cheers

[@nathanmanuel7984]

how do i check the display without having to plug into the car? How did you do that

[@akspeedo]

Nathan Manuel You will need a CAN bus box, thanks Aileen www.akspeedo.com/

[@nathanmanuel7984]

akspeedo where can I get a can bus box?

[@aliguluzade9171]

akspeedo hi. I have a question. when you repair dashboard during the process, you use yellow bands. What are they? And if the repair process must be together with yellow bands, how can I found them. Or they are ordinary sticky tapes as we known. I bought pixels for repair my w210 dashboard, but in boxing there have no yellow bands which you were used. Im waiting urgent answer. Kind Regards!

[@akspeedo]

+Ali Quluzade Just use 12mm clear sticky tape, we use the yellow tape in the video so it's easier to see, thanks www.akspeedo.com

[@aliguluzade9171]

I was think that is special tape)). thanks for help

[@relaxingthemind1243]

+akspeedo thanks for the post, fantastic work ✌

[@akspeedo]

+OFF_ROADERZZ XJ jeep lover No problem glad we helped www.akspeedo.com/

[@jimbodenrader1476]

Does the tape come with the cables?

[@akspeedo]

Hi, drop us an email after you order the cable kit, and we'll add some lengths of tape, cheers www.akspeedo.com/

[@bunyamin6003]

How to connect 2 part: one is 11 and the second one is 12. Do you have a photo

[@akspeedo]

bunyamin6003 Hi, if you have ordered one of our kits please email us for advice, thanks www.akspeedo.com/

[@bunyamin6003]

akspeedo i Am sorry i've allready buy my item and i am Fallen by chance on your video.

[@hajdarivendim4858]

Can you Tell how is named the cabel i wanna try it at home if they work or not

[@akspeedo]

Hajdari Vendim Hi you need to order: Mercedes CLK E Class W208 W210 LCD Display Pixel Repair Non Bonded Ribbons

[@akspeedo]

Hajdari Vendim on our website Mercedes page www.akspeedo.com/mercedes-lcd-pixel-repair-shop.php

[@xdxsmile]

why you still get display defective error? is it means smth else?

[@akspeedo]

xdxsmile Because the unit is not connected to the car.

[@xdxsmile]

i ask becouse i have this error at my w208. and cluster ir conected:) how can i show you a foto, maybe you will can give me advice

[@akspeedo]

Email us all the info and pictures at [e-mail] and we can see what we can do. Cheers www.akspeedo.com

[@horstschubeler265]

das auseinander zunehmen geht das wirklich so einfach !!!

[@ab8948]

Could you please tell me how can i find and where to buy the tapes? from both sides ? please !!

[@akspeedo]

The yellow tape is electronic tape, you can use standard good quality clear tape to fit this ribbon kit, we can supply the electronic tape if you like. Cheers www.akspeedo.com

[@ab8948]

thank you very much for answering ! but i see you only have full kit for sale, i jsut need that tape, and i think it will take some time to ship that to romania

[@MightyJustas]

No soldering?

[@akspeedo]

Yes, no soldering, ribbon kits available at www.akspeedo.com/

[@fuadbayraml3341]

Great 👍

[@jeandeluc7003]

Bonjour et où puis je trouver ces nappes? Merci

[@akspeedo]

+Jean De Luc Hi, available on our website www.akspeedo.com Mercedes page, cheers

[@gttm29]

hanks

[@manolisestef8378]

THANK YOU .........

[@jsjoblow]

SO oversimplified to the point that this video is as total disservice.

[@kevinjohnson8311]

Be grateful.

[@marziomaragno4049]

P