Excellent. I’ve got a set of yellow Skyways from my Torker from 1981. I’m hoping they come out as good!
@leocard67993 жыл бұрын
Where’s episode 3
@monkist3 жыл бұрын
Did you ever get to finish this before the pandemic? Would be a pity to miss out on the rest...
@maximusplebius99924 жыл бұрын
Wheres the rest of this restoration??
@agoat96255 жыл бұрын
So are you guys gonna do a 2020 se bikes vid or whatever
@TBoneBoomBoom4 жыл бұрын
For those of us who grew up in Northern California in the 1970s, this is awesome! :)
@guruzini19714 жыл бұрын
Red bluff in the house
@ClayKirby-sj3zy11 ай бұрын
That was my childhood.. had too move in the middle of the bmx craze.. lucky enough I found new friends on the East Coast but not the same.. Bikes started getting real nice.. miss those days❤
@diegoborba134 жыл бұрын
Can I use WD-40 (the original product) to clean TUF mags? Or I have to use a special stuff?
@nihilisticnut99163 жыл бұрын
01:35 When taking bolts off like this, it's a good idea to apply a little lube, or copper anti-seize, and work the bolt back and forth a little. In doing this, it will loosen any debris collected (rust etc) and lowers the chance of complications in unthreading.
@dcsrt13003 жыл бұрын
Would have helped if they had an impact gun
@glenwhyte25554 жыл бұрын
Thanks for sharing..If i posted a set of mags to you what would this cost me including the new tubes & comp3's ? Many thanks
@felixnile Жыл бұрын
i use a dishwasher to clean mags.
@tdub57765 жыл бұрын
Adjustable wrenches? Get yourself a set of decent spanners
@stacybuchkowsky63762 жыл бұрын
U add sealed bearings from old school hubs I done it
@ralphflorez41373 жыл бұрын
How do i find a whole coaster brake rear axle assembly for a 16 inch skyway rim need help thank you.
@andrewcook56064 жыл бұрын
Where’s the following episodes for the restoration? We need to see the rest of the restoration and see the finished bike
@iamyourfuture8084 жыл бұрын
As above the re chrome job was garbage so they didn’t show it
@stephenwade37804 жыл бұрын
I have Mk1 Raleigh Chromo Burner I want rebuilt, can't find the contact info
@landerosfamily32074 жыл бұрын
I need help fixing my coaster brake on some satelite mags...
@iamyourfuture8082 жыл бұрын
This dudes "American" accent is hilarious
@alansbmx2 жыл бұрын
Hes from New Zealand ;)
@iamyourfuture8082 жыл бұрын
@@alansbmx ahhh! in that case, dont mention the war
@alexyo39275 жыл бұрын
Please save yourself "a lot of work" by power washing these parts
@adamelliott35285 жыл бұрын
That'd be fantastic attention to detail wouldn't it
@alexyo39275 жыл бұрын
@@adamelliott3528 trust me you'll get it way more clean, use less product and save on man hours and the end result will be better as you can spend more time on finishing
@moshman335 жыл бұрын
Yay for the alloy flanges!
@jb.19243 жыл бұрын
It's December 2020 and i'm still searching for Episode 3 :') I got a Skyway BMX and want to restore it. Maybe the videos helping me
@memphislee692 жыл бұрын
Man those came out great! You’re salvaging our childhoods! Thanks. 👍🏻
@captianderp94524 жыл бұрын
link for the next episode, i couldnt find
@matthicks46724 жыл бұрын
yeah, would like to see the finished bike too
@indianadave88818 ай бұрын
Why did you never finish this build series? It was going great!
@alansbmx8 ай бұрын
The priority to get the bike ready for the customer took over
@indianadave88818 ай бұрын
@@alansbmx Bummer. I've been looking for inspiration for my TA.
@Rick_Todd5 жыл бұрын
Looking Good , It's all coming along nicely
@jimlmackjr12 жыл бұрын
lol big no no The tire logo not where the valve stem is at and they both are in different locations But they nice and clean
@charlesmurphy1840 Жыл бұрын
Look good.there is a couple ways you could go to make your process faster.wire wheel on the axel will takes two minutes to make them look brand new..they make a paint removing brush for drill guns that would clean the dirt off the hubs a lot faster and not hurt anything..working in a shop time is everything..they look great though..
@ClayKirby-sj3zy11 ай бұрын
Like those tiress.. mine i got som Cheng Shen comp 3 style for a rebuild project.. there fine but i like a little label on the side.
@ClubmanGT1971 Жыл бұрын
Makes me feel like a kid again watching this awesome video. Love the detail you went to and made sure you restored them to the correct finish 👌
@ClayKirby-sj3zy11 ай бұрын
Cool too know there rebuillable... They look great ❤
@freshcutsbarbershop20513 жыл бұрын
Can you convert a front skyway mag into a rear one I have 2 front wheel only
@roberthatfull38162 жыл бұрын
Yep if the hubs are alloy buy a rebuild kit for a rear tuff you have to grind the heads off the rivets that hold the plates together and drift out the rivets the rebuild kit just bolts together hope this helps mate .
@retrobikechannel2599 Жыл бұрын
Episode three?
@adamlee9614 Жыл бұрын
Why don't you use a steam cleaner on hubs?
@AP-gn9fd Жыл бұрын
Whetes episode 3?
@MrKingNica2 жыл бұрын
Where is episode 3?
@stevegreensmith24844 жыл бұрын
Hey fellas, what happened to the follow up vids?
@iamyourfuture8084 жыл бұрын
They screwed up on the re chrome so couldn’t show it
@Blackinterceptor9992 жыл бұрын
I think a large sink and dish detergent with hot water would make the cleaning go WAY faster and with better results, use a small brush on the inside...
@roberthatfull38162 жыл бұрын
Luckily the hubs wasnt crushed that was common back in the day also i used to use a magnet for removeing loose ball bearings (i still do lol)this vid was very nostalgic for me as i used to do this every week to replace the alloy hubs that where crushed or stripped threads on the axles Kool kontent and vid mate 🤘
@EricSajid3 жыл бұрын
in 1985 I broke one while jumping from a wall
@77lalocura4 жыл бұрын
Would trike skyway mags be compatible to work on a regular 24” bike? I know the front one will bolt right up. I’m wondering if the rear ones are compatible? I’m asking cause we have a trike at work that has a nice set of mags.
@shaneadamiak21532 жыл бұрын
I have a set of tuff wheel 1's do you sell a front and rear axle, bearing for a rebuild?