AliExpress Carbon Rain Light Diffuser and Custom Carbon Tips Install! (BMW F30)

[@seifk7002]

Also you can use the brown wire as a ground works perfectly

[@seifk7002]

Very nicely explained video. Although I stopped the red wire and yellow wire around to get the break force light to work properly

[@antonljunggrn7747]

i bought the same, but i have wired it just like you but the flashes only works when i have my ignition on, when i start the car i dosent work anymore. really wierd do you have any thoughts?

[@vybzwidtyngz]

I'm glad u made this video I was just about to order one 2 but now I see ur video I said f that lol great job bro

[@n55morris14]

Yeah I was not going to remove the rear bumper for it way too much work. Carbon itself is nice but fit and finish could be better. Thanks bro

[@negzoo]

And thé black where is connected on your video

[@n55morris14]

Ground. So I used the negative of the battery

[@198888joshua]

Hi , i am doing the same on bmw f10 2013 , I wanna do in the driver side, can you please tell me what color of the cable is the brake light. My diffuser brings 3 cables black , re, yellow.thanks

[@n55morris14]

Red is to day light runner, yellow is to the brake circuit and black is ground. F10 wire harness may be different colour so you should check with a test light beforehand. Hope this helps!

[@terrysaybanha1973]

brake light doesn’t flash however the DRL works

[@n55morris14]

Did you get the same item?

[@terrysaybanha1973]

Yes wiring is the same

[@n55morris14]

@@terrysaybanha1973 interesting. Does the regular brake function work with the light?

[@terrysaybanha1973]

Yes, currently using it as a regular brake light but i wanted to the have it as a drl and flashing whenever I brake. It seems like the brake doesn’t register as a brake light if the drl is on.

[@n55morris14]

@@terrysaybanha1973 interesting. And you connect to the same wires?

[@cjx1787]

Did this fits on f31 as well? 😊

[@n55morris14]

Yeah it would he the same bumper so same fitment

[@heliojunior218]

Hi, black is neutral + yellow/black and blue and red +?

[@n55morris14]

Are you referring to the cars tail light or the diffuser wiring?

[@heliojunior218]

@@n55morris14 Yes, I'm trying to install the F1 lights. I've got 2017 M140i 5 pins. Blue/gray..gray/black...brown....blue/gray...black/blue. I've tried different connection

[@n55morris14]

Yellow from car is DLR. which goes to red of the light. Blue/gray is brake light which goes to yellow of light. M140i makes me assume UK or other parts of Europe which require Amber turn signals and potentially have a different harness. Best bet is to test with a continuity tester and confirm your own cars wiring

[@fifasaki2924]

Does it fit on a f10 ?

[@n55morris14]

You would have to find one exactly for f10. This one wouldn't tho