AliExpress Headless guitar with a Endure style neck

[@c1mat1]

Thanks for all the good info and wow! Good sound!

[@sebastianfariasramirez2332]

thanks men, i want to buy that guitar

[@6oundStudio]

thanks a lot for the review! guitar looks very cool. you did a nice job on the setup

[@johnvanmtb8775]

thanks 👍

[@Echospective]

ive been eyeing this very axe for some time!! may pull the trigger

[@johnvanmtb8775]

I thought about it for awhile too , glad I decided to try it

[@Superman-pn1rx]

Looks killer for the money

[@johnvanmtb8775]

Its pretty nice with a few minor adjustments

[@phillipmendoza8703]

Great video. Do you think the cavity would fit a pair of active mount pickups like fishman? I noticed the cavity seems rounded on the edges. Thanks for your input in advance and thanks for posting this.

[@johnvanmtb8775]

Not sure on that as the pick-ups (fanned fret style) have a offset which standard pick ups do not have . You can probably ask them to route for a standard pick-up . They were pretty good on getting back to me on any questions I had - Good luck

[@academiaithaca7577]

Hi there - great review! How do you adjust the action on these guitars at the bridge? Is it just the screw at the front of the bridge ( toward the bridge pickup ) or do the two screws on top of the saddle also ha e a role to play?

[@johnvanmtb8775]

The 2 screws that are next to each other adjust the height, the screw in the middle of each saddle is for front to back . 👍

[@academiaithaca7577]

@johnvanmtb8775 thanks that works! I noticed a fourth screw ( Horizontal screw just below each string on the front face that holds the saddle itself.) Unlocking that makes it easy to change the string height then lock it again.

[@_jovian]

thats not really anything close to an endure neck, thats a regular neck that was chamfered on either side. The base model strandbergs are $999, I'm sure a used one can be found for less, buy that instead. Doesnt really make sense to buy a $300 counterfeit (poorly counterfeited) guitar to try it out, at least if you dont like the actual thing you can sell it and get most if not all of your money back.

[@danielbarbieri8199]

Hey, how is the bridge ? Can you easily palm mute ? Tuning stability ? Thanks

[@johnvanmtb8775]

Stays in tune and palm muting 👍, Really no issues with this guitar

[@aniutbo]

Do you mind sharing the scale length of the guitar? Seems a little longer than most strandbergs

[@johnvanmtb8775]

27" on the 6th string and 25.5" on the 1st

[@user-ni7ui7hs8c]

In every single video I’ve seen people say they’re ok for the money but everybody online that say they’re unplayable, why you think is that? I wanna buy one

[@johnvanmtb8775]

Some people need a name brand guitar . Some of the guitars I like best are no names:) Everyone has a preference on what they like or don't like. The good thing is this wasn't a very expensive experiment for me, and turned out good. Keep in mind this was only one guitar from this manufacturer , Hopefully their QC is good on all 🤞. Good luck

[@christopherfidler3019]

Amazon Guitars (JET, Leo Jaymz, EART, Firefly, etc.) are better quality guitars. When you buy an Ali custom you are paying for the custom work but don't buy one unless you intend to work on the guitar yourself or pay a Luthier however not all Luthiers like working on these guitars which all come from the same Factory in China not owned by Sammick or Cort with a high employee turnover rate and if there is a problem with the "company" they just create a new Ali account but the Factory stays the same so no accountability whatsoever.

[@michaelsmith9544]

My AliExpress guitar was junk. So I took that pos and taught myself to refret a guitar. Would have cost the price of the guitar to ship it back. I do recommend the strandberg I love mine.

[@johnvanmtb8775]

I was worried about buying off Ali express too , I guess I got lucky this time

[@michaelsmith9544]

@@johnvanmtb8775 maybe or maybe I just got unlucky. Either way my anger over that guitar, I turned into a skill I can use. Some tools were a bit pricey because I was using stainless steel frets and it was tough but I stuck with it. Watched hundreds of videos. A lot of work but it was fun learning and now I don't have to pay someone else to do it for me.

[@johnvanmtb8775]

@@michaelsmith9544 👍Lemons into lemonade . Its always a positive to learn a new skill .Haven't done a refret yet, not sure I want to :) I started to build some guitar kits to learn some new skills , every build teaches you something new and like you mentioned , you can work on your own guitars now 👍

[@ranman58635]

Difference I noticed with the Chinese one's. They don't sound great unplugged. My 335 grote I said goodbye.

[@DavidPerry-ui2qz]

It’s not an Endure neck unless you bought it from Strandberg. It’s a knockoff of an Endure neck. Honestly is important.

[@johnvanmtb8775]

Thats why I posted Endure style neck in the title . I even spelled endure with a E at the end , Strandberg spells it EndurNeck. Not trying to trick anyone, just some info on what's out there

[@문원재-m3s]

Bro is angry

[@thugitz1990]

KZbinr made it clear from the beginning that this isn’t a Strandberg. So i dont think honesty is the issue here.

[@supratimdas5083]

did you miss your eye checkup session mate?

[@ListeningAnt]

...an Indura style neck. An before vowels. Need an editor? Hit me up.

[@patrickkish6662]

The guy made a video to show that it was possible to buy a low cost approximation of the original guitar. So people could get the general experience, without plunking down over $1800. And that compelled you to be a nitpicky jerk??