Aligning Your Meade Computerized Alt-Az Telescope

[@william2220]

Great video, thanks! One VERY IMPORTANT step that should be addressed in my opinion is the AutoStar "Site" - Latitude - Longitude frustrations that some users experience. Your phone will give you "Decimal Degrees" (D.D.), however the telescope will only accept "Degrees, Minutes, Seconds" (D.M.S.) or to be more specific, just Degrees and Minutes (D.M.). Any value over "60" (Minutes) will give you a beeping warning and will just not work, and this info is not in the user manual. Eg : 45.75° North - 108.50° West (D.D.) from your phone or google maps, will need to be entered into the scope's AutoStar as 45° 45' North - 108° 30' West (D.M.). If your site happens to coincidentally have a DD value of less than 60, then your autostar WILL NOT track accurately UNTIL the DMS conversion is done. The math is easy enough to work out (75/100)x60 = 45 & (50/100)x60 = 30, but there are also numerous websites that can do this conversion for you. I hope this is helpful!

[@alfindigo]

Excellent tutorial, very well explained and easy to follow thankyou.

[@vinyqz]

Hey! I'm from the Southern Hemisphere and I work with a LX90, how could I align it? You talk about "point to north", should I just point to South and locate stars from the southern hemisphere?

[@octapusxft]

The problem with the Meade ETX-70ΑΤ that I have is that it does not have a viewfinder so I am having a lot of trouble aligning the stars with the main scope

[@achiltsompanos447]

You can install a 3rd party red dot piggybacked on the tube.

[@best_pilot1002]

Thanks very much ! Quick feedback question: For e.g. the 12 " LX 200, the HORIZONTAL ORIENTATION of the "CONTROL PANEL" with its cables is NOT ESSENTIAL - right ? Thanks for a brief reply -THX !

[@sonicbrush]

Hi there. I have owned the classic LX200 since 1997. I've just been observing all this time with 2-inch eyepieces. I have been getting into DSO astrophotography in the last few years and found polar alignment as a necessary procedure. I have not successfully aligned the LX200 with the super heavy wedge. I would come very close but still not enough accuracy for any exposure longer than 2 minutes. I am incorporating an Off-Axis Guider into the equation and use PHD2. But I still would like to perfect polar alignment on its own with wedge adjustments first before attempting power tools. Most videos online on this subject have been vague and tend to ramble on without substance. I'd like to see a proper polar alignment produced as clearly and explained as thoroughly as this video. Would even be nicer to compare the standard, drift, and iterative methods. Thank you.

[@colinrasmussen9470]

Polemaster. I have one, works great.

[@peterleveillee1321]

I was interested in a 12" LX850 until customer support hung up on me. It seems that getting information about this scope is impossible. I don't think Meade is doing anything to help restore confidence in them. I was hoping they would be at NEAF.

[@dr.anthonyrecascino403]

Nice. Really made it easy.

[@TheBeardedEntertainment]

Do these telescopes track as well or will you have to adjust to start on target?

[@lazervision2602]

All goto telescopes track. Once you select an object and it locks onto it, it will track it as long as it is in the viewable sky.

[@alijhi]

Thanks. That was very helpful !

[@easttnrailray5685]

Hello my stargazer 114 will not turn left or right I can hear the motor but it won't turn. Any help would be great

[@mikemuha7537]

How do you do the setup with the X-Wedge installed?

[@ddbhemzelf3427]

yes i want to know that 2.. i have a wedge with it

[@gilgemash]

Thank you for that share and encouragement...Mister... Regards from London 😷 🌈

[@adventureunderground2234]

Awesome video. I have a Meade DS-2114ATS telescope. The controller screen is out. I'm going to buy a the Audiostar controller. The upcoming solar eclipse is my viewing goal. How to set up this system in the daytime? There will be no visible stars to align.

[@dougallen7676]

what if i accidentaly bump the scope , do you have to go through the whole process again

[@ven1483]

You didn't say how to move the scope to center the alignment stars. Should it be pushed around by hand?

[@jerrycoon2797]

Use the keypad to center the star

[@enriqueagonzalez4896]

Like the video, very helpful Thanks

[@AnanasDoktor]

The price is quite expensive at Meade is the price justified for the quality?

[@mohjhmmohjhm]

السلام عليكم انا من العراق كيف اضبط اعدادات الموقع يدوياً

[@KingGhidorah_]

Were these pics shot with the 10" or the 8" Lx200 telescope?

[@zsavetsky]

Thanks!

[@FransBlaas1]

Well, having a ATX90 and for 12 years does not work.. they are made for northern parts of the world, not for South America where I live. The go to is going down looking at the floor.. waist of money.. if you know how to correct, much appreciated a reply.

[@wakingforbacon6439]

There is a way to switch it to the southern hemisphere. Just have to look up how. Mine has a switch for which hemisphere I'm in. But mine is just s little different than yours.

[@ZeroaofGOD]

Same problem i have!! Im in south africa

[@anthonynichols5142]

I don't think anybody understands.my ds2000 has damage.it manually needs the mirrors adjusted

[@Goldiney]

I was getting star alignment errors ... I was doing everything correctly.

[@anthonynichols5142]

This is not helping me.things need to be adjusted first.