Two Trees TTS-55 5.5W DIY Laser Engraver Laser Cutter Complete Review

Hello guys, it's alishanmao and welcome to my KZbin channel. Today you will see complete and detailed review of Two Trees, TTS-55 DIY Laser Engraver and Laser cutter. TTS-55 is equipped with 5.5W laser that is powerful enough to cut through 8mm thick wood. Its a very good laser engraver and cutter for DIY laser engraving and cutting and hobby use at home.
Shop Top Laser Engravers: s.click.aliexp...
Visit our site: createc.store
Buy Me a Coffee: bit.ly/alicoffee
#laser #engraver #carver #cutter #lasercutter #lasercarver

[@yorusama5011]

Thank you for your review. I think I'll go ahead and pick this laser as my starter one.

[@alishanmao]

have fun

[@chadwarrington5013]

Same

[@upsidediy3945]

Seems like these engravers can be (stacked) set up on vertical shelves, and do all kinds of work. Thanks for the video. Would use for acrylic .

[@alishanmao]

Great suggestion!

[@1slicka4nd]

Thank u. Very good explanation

[@alishanmao]

welcome

[@frank_lehne]

I really like this guy. I have been watching Ali since he was making videos for Red Cat. He does great videos!

[@alishanmao]

Wow, thanks! You Rock Buddy :)

[@AbdullaHusseinAbdulrahman]

Nice work!!! could you provide me with the parameters of engraving the metal cards? Actually I was struggling with that 😊

[@alishanmao]

for most metal, 100% laser power and less speed works

[@ShushaHamad]

I have the same machine but i don't know how to engraved metal card how can i fix it please help me

[@hsmdemarshoussem3987]

Hi....I have a question about this laser... Can this grave and cut an acrylic 1mm properly?

[@alishanmao]

yes

[@marcusrampersad8201]

Hi can some assist me i have the TTS 55 PRO 5.5w laser....im struggling to cut 3mm mdf boards...tried it speed 100 and 100 % power...it does work...am i missing some? Like a setting or something?

[@alishanmao]

laser focus is important. set it right. speed set to 200 and power 100%

[@juliimedon344]

Hello, I have the same laser a few days ago and I can't cut 3mm plywood, what speed and power did you use in the video or soles use to cut and leave the piece without having to force it? Thank you very much for your help

[@alishanmao]

low speed and full power works on cutting

[@n.r.4269]

And correct focus

[@powerROBY]

I think about buying it after seeing your video, but I would like to ask you some things: 1 Does the motherboard have bluetooth? 2 are the blue parts of the frame made of plastic? 3 is there air assistant kit? 4 how do you use the memory card if there is no display??

[@alishanmao]

yes it has bluetooth, yes blue parts are plastic, no air assistance kit. i did not use memory card. i ran my laptop next to it. hope it helps

[@powerROBY]

@@alishanmao ok tank you

[@ememeable]

Hi Brother I wonder what you are up to these days. You are really an interesting person. I myself am trying to laser etch or cut pcb for my electronic projects. i can see that you already know how to etch metal. I am wondering if you know the settings for copper cladding or pcb boards. I would appreciate your assistance Sincerely Ejike

[@alishanmao]

i have just got the newest version of TTS 20Pro, with Air compressor and cylinder engraving module, it cuts upto 30mm easily. i have not done anything for Copper cladding or PCB boards so can't say the settings

[@AlphaCollectorCZ]

Hello, Im interested in using this primarily for cutting out a regular or cardboard stickers. Does this engraver work well with those or is there a lot of burning? :D Thanks in advance for your honest reply.

[@alishanmao]

it does a very good engraving if you set the parameters and power right

[@TicTacToeEDC]

Can I add a tumbler adapter for cups, glasses, any other round object, etc. in steel material? Thanks

[@alishanmao]

Yes you can! but in the newer version. not this one

[@TicTacToeEDC]

@@alishanmao new model number?

[@willtrinaharkess4967]

Hi, thank you for the review. I have just purchased this laser and I am using Lightburne for my software. I’m currently trying to cut 2 mm acrylic. Would you have any advice on what settings to use as it’s barely scratching the surface on 10% speed, 100% power and 40 passes I’m not sure what I’m doing wrong 😢 I would appreciate any advice you may have !

[@alishanmao]

to cut acrylic you need to put some stickers. or else laser will keep going through and won't cut anything

[@ivanferrer107]

what material and thickness did you use for cutting the small boxes it looks really good

[@alishanmao]

Its an old video buddy, i totally forgot

[@Frankie-ASL]

I struggle get setting right for metal tag I have TTS-55 too. I tried 10 times and nothing cut. How do you get it in position ?

[@alishanmao]

low speed and full laser power. play with settings

[@pethuds]

Is this the Fixed-Focus 450nm 20W Output Power / 5500mW Optical Power Module Head,

[@user-ik8dw2eh3f]

Question: My letters are in reverse I have this machine and running the GRBL software. Any help would be greatly appreciated.

[@alishanmao]

it should not be. check your GRBL settings

[@gonzalomora353]

Hello, a question, what configuration should I do in the LaserGRBL program, to be able to engrave in silver or white, as shown in the video, on colored surfaces such as black or gray?

[@alishanmao]

this is all trial and error. there is no one configuration that will work for you, which worked for me. so feel free to experiment with speed, laser power and passes ;)

[@angelinecastanho7354]

Can you please help im trying to cut 2mm acrylic see-through On black it cuts perfect

[@alishanmao]

I have never tried cutting acrylic. seems like you need to use a black thick sticker

[@johnderrickmacenas1132]

Hi Sir, may I ask all the software you are using with this machine?

[@alishanmao]

LaserGRBL

[@wilsonjunior9819]

Could you give me the settings for cutting MDF?

[@alishanmao]

never tried that buddy :) it should be in user manual?

[@ruchiacts4341]

Hi nice video... Can you please help me whether this tts5.5 watt laser can cut white polyster fabric (about 1mm thick) slightly shiny surface.. I will be thankful if you try and let me know...

[@alishanmao]

Yes it will. just make sure to put a sticker on material that is not shiny

[@badreddinebadreddine3192]

Hi sir I would like to ask a question actually, if i have a wood router heard for cnc , can i change the laser head and put the router heard instead of it , is there a way to do that and would it work

[@alishanmao]

Yes you can but it has to be a very light weight router

[@badreddinebadreddine3192]

@@alishanmao yes i mean a router that's made for mini cnc , will it work perfectly? Because the router has more actions than the laser , it goes up and down

[@alishanmao]

it won't do up and down, as it has no such mechanism programmed or built@@badreddinebadreddine3192

[@zoraidavegatorres5174]

Hola , recientemente compre una maquina como esa y quisiera saber si puedo grabar y cortar acrilico de 3mm? Thank you..

[@alishanmao]

yes you can

[@lilfendiiofficialpage]

How think is the wood sheets you used and how thick do you think it can cut before it has a problem cutting through?

[@alishanmao]

10mm can cut. as they said

[@Quincy4234]

What settings are you using to cut 10mm material? I have this laser and can’t get it to cut anything. It etches well but can’t get it to cut any wood. What speed and how many passes are you taking to cut 10mm wood?

[@ydkme1532]

hey what are the settings that you use for the small letter engraving ?

[@alishanmao]

shown in vide?

[@tellmenow6734]

What parameters power and mm line you use for engraving and cutting . please help.

[@alishanmao]

you can get these parameters online by searching good practices

[@grahamminter3450]

@@alishanmao I'm sorry to bother you but I have had my new machine like yours for two days and I'm not getting it to cut through the 2mm MDF board or plywood 3mm, on my GRBL SOFTWARE I don't see where to change number of passes, can you please help??

[@alishanmao]

@@grahamminter3450 100% laser, slower speed, experiment and see how many passes do right cut for you

[@ememeable]

Hi brother The reason why hard limit switches are not standard is because of soft limit applications. The grbl firmware application allows you to program your max distance travel in both x and y aixs sincerely ejike

[@alishanmao]

thanks

[@ididnotkilljfk861]

you forgot to show an example of cutting balsa of assorted thickness for RC models !

[@alishanmao]

maybe next time

[@sjorlando7282]

You can add home limit switches

[@alishanmao]

yes

[@stevanosun8349]

Hi did you treat the stainless steel before etching?

[@alishanmao]

no

[@agnidewabi4301]

Thank u for your video. can't this device make a stamp ?

[@alishanmao]

Yes you can!

[@AdiSusanto-kp9os]

compared to Ortur M2 pro, which one is more recommended?

[@alishanmao]

Which ever is the latest one

[@josecarlos9872]

great to see you selling these machines. did you abandon the drones? Does this machine cut 03mm laminates?

[@alishanmao]

it can. I do not sell these machines. I just review them buddy

[@ememeable]

Thank you and Godbless my brother. i wish i knew the jig-saw plug in for inscape. this is to create cut outs that can be fit together without nails or glue. i can also help you with writing electronic code for your projects. if will like to automate any of your projects let me know sincerely ejike

[@alishanmao]

You are very welcome

[@biatchness15]

Hi, what’s the proper setting when engraving aluminum dog tags?

[@alishanmao]

lower the speed, 100% laser

[@jdo62]

How do you connect a rotary to the Y axis? Or can you?

[@alishanmao]

if you get a rotary from TTS it will have its own connections

[@SalvadorfreelancenegocioF]

Hello and acrilic same work to? Tks

[@alishanmao]

yes

[@SalvadorfreelancenegocioF]

@@alishanmao tks!!

[@RafaDinis]

Hello, what program do you use?

[@alishanmao]

Laser GRBL

[@izzaniielachannel]

nice..thanks for sharing sir

[@alishanmao]

Most welcome

[@dalewilson8476]

BOUGHT ONE and having trouble getting it to connect with my tablet….

[@alishanmao]

works well with android with me

[@dalewilson8476]

Should work with windows too… but so far no luck

[@mswsmw8838]

You probably got it sorted by now but just incase you packed it up again try putting the sd card into the engraver it should help

[@q00x12345]

I hope u write what settings when u cut 4mm

[@alishanmao]

100% laser, lower speed

[@gabedaxe477]

Can I cut carbon fiber with it?

[@alishanmao]

i have not tried it, but it should

[@jerrykevinlingayen3448]

What about clear/transparent acrylic?

[@alishanmao]

it will cut or engrave but you will need some sort of sticker before engraving

[@abdulmoonirkhan3050]

walekum assalam brother ,does it cut acrylic , if yes what thickness can it cut??

[@alishanmao]

Yes it will, they claim up to 8mm

[@abdulmoonirkhan3050]

@@alishanmao thanx for the information

[@Micington]

Nice sunnies! Hahaha Definitely interested. Can it cut 4mm acrylic?

[@Micington]

Sorry i read the comments.. 8mm .. impressive. Love how quiet it is!

[@alishanmao]

have fun :)

[@justkarlin]

Hola, se puede cortar vinyl textil?

[@alishanmao]

Should cut, but you need to experiment with different settings

[@876Abb]

How do you deal with the smell?

[@alishanmao]

you have to live with it

[@robertwioch3691]

wow, wow, wow, very nice job. All your work looks very nice. you did a nice job. From Robert Wioch From Marlin Tx, I gave you a big Thumb's up. AAAAAAAAAA++++++++++

[@alishanmao]

Awesome, thank you!

[@aprilbennett2156]

1/8 in basswood cutting setting please@!! Thanks

[@alishanmao]

100% laser, less speed is the formula

[@Keinapappa]

Can it cur acrylic?

[@alishanmao]

yes

[@hsmdemarshoussem3987]

Did you test it

[@sltech6809]

KKKKKKKKKK ....... Simply Show KKKKKKKKK

[@LarkspeedNL]

300% power? I doubt it. You can't go above 100% as that is full power

[@alishanmao]

thats what they said

[@The_Engineering_Experience]

This company is a joke. Save yourself the time. I ordered a machine and it was supposed to be here in 3-4 days. After 2 weeks and 3 emails I finally heard back and was told to would be 2 more months. I asked for a refund 4 times and they have not responded. I had to reach out to VISA to get a refund. Seriously go elsewhere.

[@alishanmao]

unfortunately too many companies in China are doing such things. there is no way to find out who is authentic and won't cheat. sorry that it happened to you. careful ordering from China, specially from aliexpress.

[@kyliekaren6574]

Buy through Kogan. I received mine in 10 days. And Kogan have a money back refund policy. I used Ausway. Being from Australia.

[@The_Engineering_Experience]

@@kyliekaren6574 It’s been 2 months and no resolution. They keep ignoring my request for a refund. I have turned things over to the bank. They are not working with VISA and they have resorted to calling me and texting me in the middle of the night. This has turned into harassment. Last night was 15 texts and 3 phone calls. I don’t care how exciting this engraver is it’s not worth this.

[@tarekhassan6958]

Fake, 5 watt canr cut

[@alishanmao]

i do not fake my videos, maybe you need to update your knowledge to be able to accept new tech

[@n.r.4269]

Tested by me it works like a charme ( mdf 3mm, only 1 pass speed 150, power 100% ) and with black acrylic and plywood

[@tarekhassan6958]

only 1 pass???@@n.r.4269

[@sherlockholmes-xd5zq]

@@n.r.4269 bro is machin still working good?!

[@user-ws1me1be1w]

3:10 u just used 300% of power wtf you can go over 100% ? 😅

[@alishanmao]

i wanted to engrave only. 100% would have cut it

[@Tammydandrews75]

Need help. Have this laser and need help figuring out how to set it to cut through sheet metal and wood and engrave steel. What programs do you use and what settings are best?

[@JustADream2024]

Did you ever figure this out? I'm trying to cut through 1/4 MDF board with LaserGRBL