Auriol Radio Controlled Weather Station and Ventilation Monitor from LIDL - Test

Auriol - Radio Controlled Weather Station and Ventilation Monitor from LIDL - 4-LD6012 - TEST
Temperature and humidity display for indoor and outdoor use. 5 levels of indoor climate assessment - too dry, dry, optimal, humid, too humid. Shows when to open or close windows to improve your room climate. With mould alarm. Radio clock with automatic time setting and manual setting option. Radio outdoor sensor with 50m range.
► Amazon shop - amzn.to/3NmCVpV
Watch Next ➡ Mini Massage Gun - • Mini Massage Gun - Pow...
🔔 Subscribe for more videos: kzbin.info?sub...
Other videos I recommend you check out:
Office Paper Shredder - • United Office Paper Sh...
Parkside Electric Stapler & Nailer - • Parkside Electric Stap...
Parkside Hot Glue Gun - • Parkside Hot Glue Gun ...
✅ Like and comment!
✅ Follow Me On FB ► / aliwallvideos
DISCLAIMER: This description contains affiliate link, which means that if you click on the product link I'll earn a small commission if you make a purchase. This help support the channel and allow me to continue to make videos like this. Thank you for the support!

[@milanpantic4121]

Dosta je tamna pozadina.Slaba vidljivost bez svetla.Sto znaci da moras prici do stanice ukljuciti svetlo i pogledati.Nije prakticno zato sto izgleda ko pokvareni monitor.Druge stanice koje su na mrezno napajanje sa adapterom imaju mod podesavanja osvetljenosti ekrana.Treba biti vidljiva ujutru iz kreveta bez da se prilazi i ukljucije svetlo.

[@advolf]

I can't get the sensor data on the screen. I live in city and all the channels (3) are already occupied or something...

[@otofoto]

Try manual setup. Find the full manual. You need to press TX button on outdoor sensor.

[@A_Fox]

Also i wonder why both the one shown in the video and my own one does not display an arrow under comfort but instead just displays nothing if its comfortable

[@AliWall]

I just checked my station and it shows arrow under comfort. Looks like you have some error.

[@A_Fox]

@@AliWall yeah i just restarted it by taking the batteries out but that still did not do anything, hopefully it is only because i have not hung the sensor outside

[@wladans021]

Did you solve the problem? I used to have that arrow but I've must pressed something and it disappeared... 😢

[@alexandertravlev1802]

@@A_FoxAre you solve the problem ?

[@nikosmisofis5143]

I read the manual and the arrow is referenced as "Comfort display", there it says: "The comfort display 20 is influenced by the indoor humidity. However, the status “COMFORT“ is only displayed, if the indoor humidity and indoor temperature is in the comfort range (45 % - 65 % and 20 - 25 °C)." So maybe you just don't meet these criteria in order for the arrow to be displayed. I had the same issue and now with temperature of 24°C and 64% humidity the arrow is displayed.

[@kristianpetrov9352]

Can't set the outdoor sensor maybe something is blocking it even to the window next to it can't detect it ..

[@AliWall]

At first you need to pair devices inside your house and then you can put it outside.

[@packe1302]

How to pair devices?

[@otofoto]

@@packe1302 Wireless outdoor sensor/channel setting You can use up to three wireless outdoor sensors at the same time with your device. Note: First insert the batteries into the battery compartment of the wireless outdoor sensor (38) and only then into the battery compartment of the device (22).  Open the battery compartment of the wireless outdoor sensor (38) and set the desired channel (1-3) on the channel selector switch (37).  Press and hold the CH-/ button (25) on the device for approx. 3 seconds until the radio waves of the wireless outdoor sensor channel (9) flash. The device will receive the signal from the wireless outdoor sensor.  You can press the TX button (35) to manually transfer the measured temperature and humidity directly from the wireless outdoor sensor to the device.

[@dinadina6212]

My doesnt work can u help me please

[@AliWall]

Check the battery if not working with the new battery then bring back to shop to exchange for new one.

[@rosaheinemann4439]

Por favor como faço ara desativar o alarme?

[@gallcheful]

I can't set a clock

[@otofoto]

You don't need. It is set automatically by Radio station DCF77. Just hold MEM button so it tries again. It needs about 3mins to synchronize as the time synch signal is sent each minute only. The DCF77 radio signal is sent from near Frankfurt am Main. It can be received within a radius of up to approx. 2000 km from Frankfurt am Main. However, there are a number of sources of interference that can significantly hinder reception of the DCF77 radio signal. If your device does not receive the DCF77 radio signal correctly, move it or hang it up in a different location. Note that there may be electromagnetic radiation in the vicinity of computers, telephones, radios and TVs which can interfere with the reception of the DCF77 radio signal. Problems with radio signal reception can also be caused by strong building insulation (metal components), high mountains or atmospheric interference. Replace the batteries if necessary.

[@nicolas2112]

Forget about DCF 77...what's shown in 4:07 of this video is mistaken. Maintain the button ºC-ºF/SET pressed instead of the ON-OFF/ALARM one. Hope this helps!

[@addanashraf]

Where to buy?

[@AliWall]

I bought it at LIDL, but you can probably also find it on Ebay.

[@hamoodhamoody]

Where do i set up the smaller device and where do i set up the bigger device i dont speak english so i cant watch the vid this is just translate

[@AliWall]

Small device outside on the windowsill and big one inside house.

[@hamoodhamoody]

@@AliWall thanks

[@nicolasch2]

This shitty product keeps beeping at random times of the day driving me insane.

[@AliWall]

Mine doesn't make any sounds. Maybe the batteries need to be replaced?

[@otofoto]

turn off mold alert and alarm

[@rosaheinemann4439]

Por favor como faço para desativar o alarme?