All Bass Strings Explained | feat. Julia Hofer | Guitar Tech Tips | Ep. 78 | Thomann

[@paolotaranta4300]

Ok thanks, but what's Julia's opinion? And her comments? 🤔

[@ThomannsGuitarsBasses]

She really liked the following strings: Nickel plated steel, Elixir, stainless steel, flats, pure nickel. She normally uses Roto stainless on her basses, but she told she will consider using Elixirs and pure nickels too in the future. Cheers //Kris

[@kriskris4552]

Where is Frank's "Distorted Face" opinion?? It would be valuable!

[@jcisme]

@@ThomannsGuitarsBasses So Juilia liked them all :-)

[@buckemptier]

@@ThomannsGuitarsBasses HI, very informative video, great reference for tying new strings out. Can you tell me what it is about upright bass strings that makes it so you can play them with a bow? Do they make strings like this for an electric bass? If they did, could you play an electric bass with a bow?

[@gorillafunk725]

Watch Julias face If you want to know what she likes its a smirk followed by a slight carcrash face. Elixir & Cobalt is my deduction. Well Julia am I right or did I just carcrash myself?

[@jimmygardner2855]

Good format, but what about Tapewounds?

[@daviddavis1322]

Tapewounds are for fretless, honestly. They get worn terribly on a fretted bass. I'd had a set of tapewounds on a fretless carvin for a decade and that was absolutely the right strings for that bass. I'd tried half rounds and flatwounds. But the tapewounds worked incredibly well with the bartolini quad coils I had in that.

[@c.conga11]

​@daviddavis1322 I've had the same tapewounds for years and they are not worn at all

[@rafbass]

I really like how the gold strings matched the color pretty well with that bass paint

[@matthewbeckwith663]

Soooo cool looking

[@jdmarino]

Finally: Julia joins you! Moar bass!

[@ThePlemon]

Juila has incredible feel and "human" time which also impressed Marcus Miller, I hope you will do many more collabs

[@PeteCarlton]

Julia’s playing is just sick. Something special for you 6-stringers!

[@DMSProduktions]

Careful! Lest ye be labeled a simp!

[@williambarnes4612]

@@DMSProduktions ???

[@DMSProduktions]

@@williambarnes4612 WAS I talking to you?

[@Six3rdy]

​@@williambarnes4612What our fellow brother in Christ is warning us of is that you can get labeled as a simp for anything these days, so it's important to not get caught lackin'. It happened to me in the KZbin comment section awhile back. There was a commenter who gave a good joke (and she just so happened to be a girl), and I remarked that the joke was very good (in comical terms). And I got branded a simp for it, despite the fact that I didn't do anything to warrant it. I don't approve of his delivery (respectfully to mans), because this is the internet (so it's everybody's conversation) and he can't fault you for your reaction because it does look weirdish. He could've just explained that shit gets real out here in these KZbin streets and you don't wanna be caught lackin'. But I do understand what he was saying. Granted, I personally don't think it's a big deal, because someone else calling me a simp over nothing says more about their inability to read a situation. But I understand the caution. The internet be body slamming homies for small shit. 😂

[@darpope2752]

I have discovered, and LOVE La Bella black nylon tape wound bass strings. Oh my goodness! The sensual feel of upright bass strings, with a rich, warm sound that can make church pews vibrate. After the first couple of songs, you aren't so much playing the bass, as you become one with it. The sound Motown wishes they could have had, if only sub-sonic sound reproduction had been up to it in the 1960s. Play McCartney's bass riff from the Beatles' song, "Come Together" and hear a whole new dimension to a song you thought you knew. The strings make it fun to play in the deep end of the swimming pool! Maybe not the best choice for metal bands.

[@thierry18]

Not good for most music, but they certainly shine in their niches.

[@Br0adCastYourS3lf]

Have you also tried DR Strings Black Beauties (or even their Red Devils or Neon) ? I use the Black Beauties on a fretless.

[@darpope2752]

@@Br0adCastYourS3lf red or neon might be a bit over the top for me, but I'll try the black bueaties!

[@Br0adCastYourS3lf]

@@darpope2752 Yeah thought so. That's why they were in parentheses. Are you rocking the La Bella 760N's? If so I might have to try them.

[@darpope2752]

@@Br0adCastYourS3lf nothing too fast, the La Bellas can become a bit awkward, but, as I said, "Come Together", the Eagles, "Hotel California", that type of stuff just sound wonderful. The strings make me a better player than I am. BUT I am gonna get a set of the DRs. Let me state the obvious - there's something I find appealing about black beauties! LOL!

[@MarceloNegreiros7]

As a layman on the subject, I really liked the sound of Cobalt strings. I can imagine the work it took to make the video. Julia and you had a lot of patience. Congratulations from Brazil!

[@M3rox11]

Didn't expect a such drastic difference - wow! I love Stainless Steel on most of my basses, it's just a feel thing. (nylon tape wounds would have completed the collection)

[@buckemptier]

I was totally gonna say that it's actually the reason I was watching the video,to hear tape wounds... Damn. Are all tape wounds nylon?

[@buckemptier]

Well how would you characterize the sound of tape wounds, compared to these others? Are the more like flat wounds, or what makes them different? Also do you know the type of strings on an upright? What makes them able to be played with a bow?

[@juzek1958]

@@buckemptier Uprights generally use stainless steel flats or gut (less common since mid 20th century- they don't last long and good ones are expensive). The resin on the bow hair grabs the string to vibrate it.

[@bassonthemark8191]

I started watching this and realized nope, absolutely need headphones and will start it over later. What I saw so far, very interesting and informative. Thank you, as I can only imagine this took a while to produce with all the string changes and playing examples for each string type. Julia as always is a super solid player!

[@cappucciobass]

I use a small trolley as my gig bag to drag around. I play double bass going from pizz to arco, electric bass, acoustic bass with pickups so I always use an Ernie Ball volume pedal. I always use an LR Baggs preamp to sculpt my sound. I carry a 9 led light and an extra smaller one if a band mate needs one. I have a small baggie of extra batteries for all my equipment. Cloth pins as wind clips as even air conditioning can disturb music charts. I have nail clippers, finger nail files, bandages, and baby powder for clammy hands. Pencils and scotch tape are a necessity to share for marking up music, taking notes, and taping music. I like the older Kong tuners. I love and have learned a lot from your Utubes Julia.

[@michaelanthony9068]

I love that you acknowledged the “sticky” quality of stainless strings. I tried them and noticed that, and then comments on line did not reflect my opinion. Thank you for letting me know it wasn’t my imagination !

[@niteshades_promise]

My 5 string is tunned up to drop C/D standard. Feels/sounds so much better than de-tuning my shorter scale 4 string. Which needs new strings. This video really helped.🍻

[@andrewyhan1]

Thanks for the great format of pros and cons and top observations + playing the same licks for each set of strings. Really helps delineate the differences!

[@GregoryHill1964]

DR 's ... my favorite... round core ... you can play anything with these .. in my 40+ years of playing guitar and bass , round core is Key 🔑

[@PANICBLADE]

I'm glad you mentioned that steel wound strings are actually lower output. I have come to the same conclusion in my experience, but many other outlets, forums, and brands claim otherwise.

[@ArashFallah]

I liked the Optima quite a lot, even though I'm not allergic or looking for something exotic! Other than that, the regular flatwound is pretty nice.

[@musicalal3752]

I appreciate the tedium involved with all the string changes, and thank you Julia, for playing the same phrases over and over, you were pretty rock-steady and nearly identical each time. Perhaps in another episode you could do a comparison of tonality for fretless bass with various types and brands. Thanks for this comparison, it was very useful. Best regards.

[@ThomannsGuitarsBasses]

Thanks a lot! Needless to say how thrilled I was when I asked Julia to do this and she agreed on it. It was a lot of work but we all believe it's a useful video for many. Cheers! //Kris

[@dennismullins4930]

Julia’s is simply the best ☮️

[@jambarreturns9060]

The Queen of Bass is there, Top notch. 👏👏👏👏🇬🇧

[@LeeJoRo]

Elixir for me (for guitar and bass). They're more expensive but they last a really long time

[@L.Scott_Music]

Already that bass has had more string changes than most basses in the world!

[@jcsk8]

Hahahaha.

[@studiodw12]

In just one video we learn a lot, bass strings are very expensive, double for flat wound, gold some at 74euro!! I'm missing the ghs that I had and were doing well, well done to you ♥

[@olymoon2008]

Thank you so m much for this video. It's impossible for us to try all those strings, but they are expensive, and buying the right strings is very important.

[@miner49er79]

OMG !!! what a beautiful Jazz Bass !!! Danka Shern Julia !!!!!!

[@clausm2203]

Great to see Julia on this episode🙂👍

[@liohrt]

THE video I was looking for, right when I was thinking about changing the type of string on my bass depending of the sound I was looking for. And... cherry on top: Julia playing each string with the same settings for good comparison. Seriously, who disliked this video? BTW: There is a real problem of stock with coated elixir strings. The set julia is using (the 45-105 4 strings) can still be found, but unfortunately, it's not the same story for 45-100 or some fifth extra string... and this for months. Hope it will come back soon

[@grahamf695]

Yes, I can’t find the coated Elexir strings for 5-string bass anywhere. That’s why I’m watching this video!

[@chriscuthbertson]

As I'm getting older I'm definitely appreciating flats a lot more. Can't beet the vibe of a passive bass strung with flats. I always have an active bass with nickels and a passive with flats when I turn up at any gig.

[@telecasterbear]

Passive bass, 34" scale, with Labella flats, 45-105, feels right for me.

[@rallereloaded2180]

I really like to listen to the tone of the strings but to look at Julias face - she says quite a lot without loosing a word here ;)

[@darvinclement3250]

Fantastic comparison! I could actually hear the difference between the strings. Thanks for making this video, must have taken a lot of work.

[@ThomannsGuitarsBasses]

Thanks a lot! We really hope this helps many people to chose the best strings for their needs. :) Cheers //Kris

[@BlackRootsAcademyOfSoul]

Rotosound Steels all day long. 👌🏿 Great for Graphite Basses. I'm using the Optima E-Bass 24K GOLD Unique Studio and the Chrome Unique Studio Bass Strings at the moment. Greetings from Uganda 🇺🇬👊🏿🖤

[@danielschmaderer]

It’s been years since I played bass, but I remember when I would play with any band, I would always play with a Fender P Bass, last bass I owned being a Fender Black Top P Bass, which was an amazing bass and I honestly wish I never sold it, since it’s nearly impossible to find new nowadays. For strings, I use either DR Hi Beams, or Dean Markley Blue Steel, depending on the sound of that particular band. I couldn’t stand Black Beauty strings. While they do sound great out the box, they feel terrible when you wear them in. They were actually painful to play. I tried them 3 times and just couldn’t justify the pain I started feeling over time. As for my gauge size, it was always .45, .65, .85, .105. This was due to always turning in E flat and sometimes dropping my E string to C sharp. It worked for me and basically every band I played in. They all agreed to the tuning of at least E flat. Great video. Definitely a nostalgia rush for me personally and I liked hearing what different strings offered.

[@basstler84]

what a great playing, i really enjoying it, and thx for all the infos. I think all types of strings and brands can be interesting and enlightening to play around with. There is a lot to discover. My recommendation for all Drop D players: Fodera - Medium Heavy "E" Nickel-Roundwound (45, 65, 85, 110) 🖖

[@andrewpinner3181]

Thanks guys !

[@Sic20189]

Really helpfull overview for strings you did there. I have one point to add regarding the Elexir Nanoweb coated strings. From my experience they also have reduced friction, which I really like for sliding or when you playing a lot of fingerstyle. So much more comfortable for me, especially because I'm mainly a guitar player and only pick up my Basses now or then (another argument for coated string for me). I also tried some coated Boomer, but there you don't have that advantage. I'm guessing they only have the outer wire coated and not the whole strings.

[@eddierayvanlynch6133]

What I want for Christmas is a video with the out-takes from all of you this year. Excellent vid, as always! 🤘🎅🏻

[@ThomannsGuitarsBasses]

Haha, that'd be the weirdest and most random gift of all times. 😆 Cheers man, thanks for much for your support!! //Kris

[@joermnyc]

I prefer flatwound since I got into those on guitar first (see my Jaguar profile pic, flats are a must on the threaded bridge saddles). I like the smoother feeling over roundwounds (on bass the low E winding feels huge to me) and the slightly darker tone.

[@DoofersCreepers]

Thank you for the video. I use rotosound rs665-ld, low end is not muddy any more. Sounds much clearer. Good for Reggae too!!

[@philosocrates]

Great Video! I don't have a "sound" yet as I am still super amateur. Lots of channels talk about tone and Bas brands, but never really demonstrate the string differences.

[@MariuszBoruta]

You can say so much without sayin' a single word ❤

[@davidreynolds7608]

Great stuff! Finally some explanation of the differences however subtle of the myriad of choices we have. Now I’m going to experiment on my 63 P Bass. Thank you🙏

[@Freudenfreude1]

Yeah this is what I needed. More bass. Great video. Very informative and useful.

[@ThomannsGuitarsBasses]

Thanks! //Kris

[@MikeLute]

Thanks for investing all the time to restring the bass. This viedo will definitely help choosing the right type of bass strings. Maybe you could make a video about inspecting a new guitar after receiving it, when shopping online.

[@abouc]

Great video! Cobalts are perfect for drop D tuning and aggressive tones. Half-rounds always go on my multipurpose PJ bass. I recently tried Rotosound swing bass strings on my Geddy Lee signature jazz bass and they sound amazing.

[@danadane2501]

Honestly I've played a myriad of strings and the best by far as far as comfort , tone , longevity , versility are basic nickel / round wound D'ADDARIO !

[@jomamma1750]

You guys forgot about tapewounds and pressurewounds. Tape wounds work great in toning down an overly bright bass ie. Swamp Ash Body, Maple Neck, Steel Bridge, brass or bone nut. You get the picture. The pressure-wounds(also called ground-wounds) are great for getting the traditional Motown sound out of an otherwise dark bass ie. Basswood or Mahogany Body, Rosewood fretboard, Brass Bridge and Bone or Graphite nut. They are just a pinch brighter than Flatwounds so they do have a time and place. Otherwise a pretty good tutorial, thanks.(note: this statement contains factual inaccuracies which I correct below in subsequent conversation. I have left it as originally posted so as to maintain the continuity of the conversation)

[@stephenshoihet2590]

Pressure wounds are not the same as ground wounds which were included in this comparison.

[@jomamma1750]

@@stephenshoihet2590 The ones I buy are called GHS Pressurewounds. They are made by taking a large diameter roundwound string and grinding it smooth, like a flatwound. This type of string construction is not mentioned here. They have a bit of a niche application, but if you need them they work wonders, and that is why I brought it up.(note to any readers, please read my comment below concerning strings and construction techniques. This statement I made here is factually inaccurate but I left it intact as it relates to the direct response below and to my subsequent comment. I decided that editing this comment to correct the inaccuracies would make the conversation completely unintelligible so I have left it as originally posted, warts and all)

[@stephenshoihet2590]

@@jomamma1750 ghs pressure wounds are not ground, they're put through rollers that flatten the outer windings, hence the "pressure" in pressure wound. Pressure wound strings generally feels smoother than ground wound strings. Ground wound strings are mentioned here, they're the d'addario half round strings.

[@jomamma1750]

@@stephenshoihet2590 Ok, What I did was to get the Nomenclature incorrect, hence the confusion. The GHS Strings that I use(besides Boomers) are called Brite Flats. They ARE groundwounds. However, unlike the description given in the video the GHS version does not sit halfway between rounds and flats on a tonal scale. They sit only slightly brighter than true traditional flatwounds. They are also absolutely smooth and feel essentialy identical to a true flatwound. Hence the confusion as I have never used D'addario's "half rounds". I have also never knowingly used Pressurewounds, which sit much closer to the halfway point on a tonal scale than the Brite Flats, according to the manufacturer. I, therefore, had made the incorrect assumption that what he calls "half rounds" in the video were indeed pressurewound strings. Having never played that type of string I have no frame of reference as to the feel under the hands and the implication in the video is that the "half rounds" are not glass-smooth. Brite Flats are glass-smooth. So that does leave 2 styles of string construction, Tapewound and Pressurewound, unmentioned in this video. There may very well also be a considerable tonal difference between D'addario's "Half Rounds" and GHS's "Brite Flats". These differences in tone amongst manufacturers will stem from somewhat different construction techniques and, at times, radically different metallurgies used.

[@rugrat1965]

Great video.

[@florenttenryu5011]

Never realized there is so much different kind of strings !

[@el_blaxicano2]

excellent playing! i aspire to be as good as Julia someday

[@Grumdot]

This explanation and comparison was very useful. Thank you.

[@ulrichkeller196]

I would expect a much better comment about the Flatwounds, maybe try some real good ones like the D'Addario Chromes ECB80 instead of the Rotosounds. I play these on all my basses incl. my acoustic one, but not on the Steinberger, on which I use LaBella Flatwounds with double ball ends. Everybody that tries my basses is amazed about the playability and the sound of the D'Addarios, two bass playing friends of mine switch to Flatwounds recently. In fact players like Paul McCartney, John-Paul Jones, Bill Wyman and many others use Flatwounds on their basses. Haven't you seen Julia's smile when she played them ?

[@maxine2798]

Thank you very much. Everything I needed to know in one place

[@TAZnator]

Thanks, great comparison!

[@IgnatiyShuChannel]

I'm a huge Ernie Ball lover and my choise is Cobalt ones. But any way Rotosound Flatwounds were also cool

[@sparkyguitar0058]

I wouldn't know a good bass string from a bad 1. Lucked into a Dr Tech bass for $80. Fixed it all up as it had a little bow in the neck. Decided to get some new strings for it. Found a 3 pack deal for Fender x light red pack on Ebay. For $18. Got them thinking a string is a string. When they showed up it was 4 packs and I haven't changed strings in since. But don't use this bass much. As I'm a guitar player. With 4 very different guitars and each has specific string set for each guitar. These Fender bass strings work. That's all I know. Interesting video to maybe learn something about my bass.

[@MrWilson-WithaPbass]

I went thru them all over a couple years and found out ,The Hybrid Slinkys NPS 45-105 are what I like .Now they'r on all my Basses . Recommendations for the Series .... "More Julia!" she is great and a killer player .Love you Julia . Yes Julia "What are your favorite strings ? Not to mention a whole Rig rundown ?!"~ Please

[@Funkybassuk]

I was very pleasantly surprised by the hardened strings.

[@PavlozKapeliz]

None of these sounded better than the Daddario EXL160BT Balanced Tension on my bass... tuned to drop C... and when "Big Muff" drops in, things are just great! 😁

[@ThomannsGuitarsBasses]

Drop C + Big Muff... you legend! 💪 //Kris

[@Cruiseangel72]

Wow, great video. Love the string combo's.

[@Eric1396]

Great video, well done and we'll explained.

[@DemskePaul2017]

Awesomely helpful thank you!

[@ggman946]

I’m a guitar player recently acquired a p bass. Put EB cobalt strings on it. I like the smooth feel of flats. But the sound - nope. I learned here they are scooped midrange and suited for high gain. No wonder I don’t like them! Thanks for the review. Might try DR pure nickel next.

[@xdoctorblindx]

Great playing and great info!

[@Dylan-Juhan]

This is awesome, definitely showing this to students interested in chasing tone. Only wish you'd included tapewounds, but great video nonetheless!

[@PooNinja]

🎵All about that bass 🎶

[@JLeppert]

Cobalt flats changed my entire rig. I not only record with flats, I play live with flats now

[@grooveholmes79]

this was informative, thanks!

[@taliesinmusic]

Favourite tone for me was, nickel plated ernie balls and the cobalt

[@jonbass1611]

Great review thanks!

[@nmnmnm9509]

Julia ❤️ playing.

[@Starflyer0059]

While this video was actually informative, using Rotosound flats was actually a fatal mistake as they are one of the brightest sounding Flatwound strings in the market (same to be said with Dadarrio chromes, Slinky Cobalt flats, etc etc). A better example of a more fundamental and old school sounding Flatwound would have been Labella Deep Talkin Flats, or even Optima Flats.

[@mjnc3672]

Very informative. Would like to have seen your take on nylon tape wound strings.

[@ernestnatiello]

I've been listening to a lot of these videos lately, and this one sounds like it was produced underwater. I think all we're hearing is the signal chain.

[@markbass354]

YAY JULIA IS BACK HI JULIA AND KRIS

[@ThomannsGuitarsBasses]

Hey Mark, yesss! I mean... we're better off this way. I love playing bass but we needed a proper bassist for this job. :) Cheers //Kris

[@saemikneu]

Funny accent, sounds like Swedish :) thanks for the video, I'm always using nickel plated or coated strings by one or two manufacturers.

[@jerryrose9472]

For aggressive styles of music ie hardcore, metal, and punk I loved using cobalts. Issues, I noticed they wouldn't last as long as other strings I had used, and from what I remember they were limited in the lengths you can get. So extended range players are a little out of luck.

[@serdarozbey]

Very good comparisation thank you

[@lexeykuzmintsev2410]

She's amasing!

[@juhatarkka9867]

You did not include nylon coated electric bass strings, which have a unique sound of their own. Would have liked to hear your comments on those as well!

[@jazzman0173]

I play frettless with flats ,might try some of the brighter sounding ones next but round wounds will chew up your fretboard!

[@juzek1958]

Probably over much time. It's one of the reasons my fretless has an ebony fingerboard (the other reason was feel and familiarity switching between upright and bass guitar).

[@DMSProduktions]

I have found with SS strings on bass, it was LIKE having a chorus pedal on all the time. Too much upper partial with less fundamental! However, I LOVE SS guitar strings! Not so much uppers on thinner strings. But more elastic @ the same guage/tensions than nickel doped steel, which is stiffer!

[@juzek1958]

I use medium gauge SS flats (55s) and never have a chorus problem. I also play on a fretless.

[@DMSProduktions]

@@juzek1958 Prob cos they're FLATS! Round wounds are definitely more zingy, so get more upper partials than fundamentals, causing the chorusing!

[@andrewmuelleranantababaji8073]

Use nickel wounds with string cleaner conditioner with guitar string scrubber after each play im getting 6 months use out of plain strings with 2 hours playing time a day, your saving money and not have to get use to feel and sound difference with coated sets

[@buckemptier]

Have you ever tried boiling them? Same effect but even better, makes em sound new, though I think it weakens them a little maybe

[@thefrogger6507]

Ah yes time to watch things about all the string types while I play on the 5 euro mystery metal harley benton strings

[@troythompson1621]

For a pleasant surprise, try the cobalt flats from EB.

[@SeanAllocca]

I am just here for Julias bass face.

[@dallassurfersclub8872]

Julia is a great bass player. How long does it take to get that good? I'm taking my first bass lesson this summer and I'm excited.

[@nilsensantin5351]

Don’t wanna read through all the comments, but this also apply to PBass and other types of basses such as active? Great video! I’m a GHS Boomers medium

[@trianglerecords]

Mine were not tested, I only play on Fender 45 in gauge 45-105. In the test I like the sound of the DR's.

[@foljs5858]

Were are the tapewound? Also the picollo bass strings need a shout out!

[@Marekki2202]

🎵All the... 🎵 Bass strings... 🎵 True care... 🎵 Tone brings..!

[@steviemac8075]

Any videos on short scale bass guitars?

[@Rick-pi9zn]

dont go for halfrounds, they are super unevan from string to string and feel horrible, I would reccommend to choose flatwounds anytime.

[@DeeFromBrooklyn]

I have a fender Meteora. I'm wondering if I would get grounding noise if I installed nylon roundwounds.

[@RobertPletscher]

Great video. I had thought I had already known everything about bass strings and learned a lot from this video. But: Tapewounds were not introduced. Missed that one or was it on purpose?

[@sirnatanielson]

If only i knew that was an option for single frets! Guess I'm buying another hammer... Because i need all the hammers i can get apparently

[@randygomez9595]

One important thing to know about stainless steel strings is, if your instrument has nickel frets, those strings wear down the frets much quicker then nickel strings. I got my Fender Jazz Bass plecked about 6 months, then put some D'addario Pro Steal strings on it there is now already some noticeable fret wear. So just know that if you really want that bright tone of steal strings, your frets are gonna take a beating in return.

[@studiodw12]

Do you have a video with tapewound nylon strings? I think what my bass sound will be what do you think of this type of rope?

[@svendallai]

thanks!!!

[@boomerbassmeme]

Most of my basses have stainless steel strings on them. I do have DR Black Beauties on a couple though. 😊👍

[@ThomannsGuitarsBasses]

Hey man, thanks for the comment! I also put stainless steels on my bass and I gotta say, I love the tone. It's a 5 string p bass and it sounds more defined now. How would you describe the tone of the Black Beauties? Like Elixirs? //Kris

[@boomerbassmeme]

@@ThomannsGuitarsBasses Never played with Elixirs. It is kind of like a cross between tape wound flats and rounds, smooth, but with bite. If that makes any sense.

[@notenoughpaper]

I don't get why tapes are always ignored, they exist and they are amazing!

[@pubertohare1337]

Very informative video, thank you. My question is; Please can I have all the old strings you used for the demonstrations? ;)

[@ThomannsGuitarsBasses]

Thanks Pubert! The strings ended up on display instruments and in the workshop as spare strings. It would've been a huge waste throwing them away after a few minutes of usage. Cheers //Kris