I'll be honest, arrma did real good with this mojave release. That white part on the plastic, might be able to be brought back to life with some silicone spray. I would scrub it with a clean scotchbight pad, and then soak it down with the silicone spray. Let it sit for a few hours. The dry plastic will soak in the oils and not be so brittle.
@RC4us Жыл бұрын
the did a fantastic job i think ive never liked a short course style truck until this one its awesome an is super tough ive got about 6 packs thru it an not a break yet i did do some tuning to rear shocks they was just 2 soft for me
@gillian9178 Жыл бұрын
The body posts getting jammed in was when running on very loose sand, the sand/stones get packed into the post holes.Jamming the posts into the holes, probably not an issue if you dont run on to sandy areas.
@RC4us Жыл бұрын
no ive ran 6 packs an i have no isssues like @dorc was having an my next video will show all the lose dirt an gravel but after a few runs the holes break in i choose to leave mine alone to see what happened an as i suspected was ok.... now in the front the bumper gets hung up on the inner grill... ive had zero issues with mine
@gillian9178 Жыл бұрын
worst body sticking was Earl Moorheads video, he had to use a hammer & punch to drive the pins out from umder the chassis. He couldnt pull the body off at all untill he got home, this could be a potential problem if the truck started to smoke, Arrma are aware of the body sticking problem now as they reached out to Earl.@@RC4us
@K5_RC Жыл бұрын
Yeah mine broke in after about 4 packs. It still has some tension but one good shake and it pops right off now. Some times harder than others but not as bad as the first 1-3 runs. Now I've put around 14 or 15 packs through it and it's been unbelievably fun every single run with no issues aside from the center driveshaft (rock got stuck and melted right through, same as the other 3S and 4S trucks have had issues with) but that was as easy to fix as swapping the battery. And cheap. This thing has been an absolute beast where I live
@RC4us Жыл бұрын
@@K5_RC I agree I have a question is your center driveshaft loud mine seems like the bearing isn’t sitting tight
@K5_RC Жыл бұрын
@@RC4us I'm not sure where the noise is coming from but I agree. The bearing might be the source of that deep wirring noise we all hear on our Mojaves at high speed. Mine does make that noise but I didn't think about that being the issue! But yeah, mine does make a noise too. Just might be shaking around on that plastic bit
@phillybrc Жыл бұрын
She rips! Just a beauty RC! Good for you Mike!
@RC4us Жыл бұрын
now to pick up my grom
@JJ-lu6mg9 ай бұрын
Luv that poster in the background. Where did you find that because that’s a sick picture?
@RC4us9 ай бұрын
My local hobby shop gave that to me
@jebrc Жыл бұрын
awesome truck Mike i love it congrats . I think we have a 4s typhon comig soon well i hopr anyway lol but your right theres more to go with that chassis
@RC4us Жыл бұрын
Fireteam 4s
@REPLAYRC Жыл бұрын
I don't know why Arrma only applied center differential now! Anyway this Mojave 4s looks great! I enjoyed the video, friend!😀👍
@RC4us Жыл бұрын
Thank you yeah I think it’s because they’re a lot like me as a basher I don’t have to have a diff a slipper is plenty good for me… the difference can truly only be noticed at a pretty high level of competition car…. You can tune a slipper just like a diff an they’re a lot cheaper in the long run…. Now when I raced off road buggy it was really nice to be able to switch between the 2 center diff works great in high traction but when it’s loose I much rather have a slipper…. But now I bash so whatever it takes to SEND IT!!! But I do like it an it works so good in there that I wanna do a build using one in typhon 3s or something a bit more custom lol Thanks for stopping by an watching my vid
@RevelationRC Жыл бұрын
Awesome video brother ❤ I'm a short course man but never found one I liked. This might be it 🤞
@RC4us Жыл бұрын
Well I’ve hated everyone I’ve ever driven until now an this things amazing
@TheWesNile Жыл бұрын
What kinda runtime are you getting with those batteries?
@RC4us Жыл бұрын
The cnhl 8000mah 40-50 minutes 20 on the power hobby
@RC4us Жыл бұрын
Also a promo code for another 15% off amzn.to/49CYagJ
@lukerecore Жыл бұрын
?? Did u say that we r getting 3s and 4s exb rc cars??
@RC4us Жыл бұрын
Well I said that I think that with all these new parts label EXB an the fact we haven’t had a update in years on the 3s line most still using blx esc an not spektrum that I think maybe a EXB 3s line is next but also think maybe a 4s FIRETEAM would even be cooler
@lukerecore Жыл бұрын
@RC4us Oh ya dude that would be fucking dope.
@RC4us Жыл бұрын
@@lukerecore yes it would I keep tell Jason dearden that too lol maybe he will listen lol prices would go up but I think if the would have a standard version an a EXB version of them an just do away with the mega line basically replace it with the EXB
@smoothwookienookie5912 Жыл бұрын
@@RC4uskeep up the good communication. I think a revamped exb 3s line with center diffs would take over the market, would be awesome. Also tell Jason to make a 1/5 gorgon lol
@RC4us Жыл бұрын
@@smoothwookienookie5912 right on I would love to see a 4s fireteam that would just be epic
@lukerecore Жыл бұрын
And I was looking at cnhl batteries for a while now, but all of the sizes r to big for my outcast 6s battery tray. And I was looking at the 6200mah, nevermind the 8000.
@RC4us Жыл бұрын
I run 6s cnhl in my outcast 6s I’ve recently only started running it on 4s as 6s in that short wheelbase is insane the way mines set up
@lukerecore Жыл бұрын
@RC4us But what mah?? Ya I could buy a couple of the 5000mah, but I have 2 hrb 6200mah 100c 6s and they r shorty packs
@RC4us Жыл бұрын
@@lukerecore I run the 6200mah 90c CNHL 6s packs they been AWESOME pretty much any video from this summer is running a CNHL I can’t leave pictures here but here is a link to Amazon for the ones I run amzn.to/40iCCBK