Timestamps: 0:00 Introduction 0:40 Advantage of Differential Signaling 3:33 What is Common-mode input signal? 4:25 Basic MOS Differential Pair 8:41 Differential Amplifier with Common-mode input 13:50 Range of Common-mode input for Differential Amplifier 17:13 Differential Amplifier with Differential Input (Qualitative Analysis)
@jbt-phones Жыл бұрын
What my lecturer and friends have been teaching for months,I actually just understood in this video. Thank you 😊
@yassinabdullah520911 ай бұрын
seriously, i really like this kind of channel which explains in detail and clearly.
@flaviuswestfall171810 ай бұрын
You are single-handedly making me pass my analog electronics course
@mayankgupta4603 жыл бұрын
It was amazing, loved the explanation and how you proceeded with the topics and then build up upon them
@jinyongoh3 жыл бұрын
One of the best diff amp lectures on KZbin
@vovanilva43652 жыл бұрын
Great one, even @the university we didn't get such great explanation.
@imanebaadaka3485 Жыл бұрын
true
@ggmb10329 ай бұрын
Thank you so much sir for taking the time to give such an excellent explanation.
@AjinkyaMahajan3 жыл бұрын
Wonderful Content Please make a dedicated video on Lockin Amplifier Cheers✨✨
@ALLABOUTELECTRONICS3 жыл бұрын
will consider it.
@haswanthraj37083 жыл бұрын
I was about to refer for this video and got it in time.😄
@aboumarakhossam5 ай бұрын
Thanks for this huge amount of good detailed information about the diff amp. My task is to build a diff amp with two P-channel as a load. How can I make an internal current source with two N-channel and one P-channel?
@akashkiruba3925 Жыл бұрын
Very clear explanation.
@myintnaing2470 Жыл бұрын
Think. for. such. a. good. teaching
@proudindian762 Жыл бұрын
You are awesome. Thanks bro.
@mayurshah91313 жыл бұрын
Very well explained 👍👍
@Funworld-r7x15 күн бұрын
Best channel
@muhammadraza92922 ай бұрын
7:48 why in this part we divided the differential input by 2 isnt the differential input of both vin1-vin2?
@skippersun52803 жыл бұрын
nice work , man
@umargul56443 жыл бұрын
Well done
@King-Professional Жыл бұрын
Sir can you please inform about the book you are using?
@mangalapallirajesh87623 жыл бұрын
Very nice explanation
@ambatisivaji18073 жыл бұрын
Nice explanation bro... But my all students asked for "ITI-ELECTRONICS" MATHES Problems please provide electronics caliculations
@pulabhargavi13703 жыл бұрын
Sir, can you explain the microcontroler program?? Please sir.
@christoschristodoulou94398 ай бұрын
THANK YOU
@journey2destination6162 жыл бұрын
what is the advantage of common mode signal input then , if the differential output is 0 all the time. where it is used ?
@calebv69142 жыл бұрын
You need to have a DC Signal (Common Mode Signal) in order for current to flow. The common mode signal essentially turns on both FETs and turns them both on the same degree. Adding small AC input signals on top of that will ensure that there is a differential output at the drains of the transistors.
@omerkahyaoglu97003 жыл бұрын
You have many playlists, in what order should I watch them? (from 0 to %100)
@ALLABOUTELECTRONICS3 жыл бұрын
You can start with basic electronics and network analysis playlist. And then you can refer other playlists.( Diode, BJT and MOSFET)
@omerkahyaoglu97003 жыл бұрын
@@ALLABOUTELECTRONICS thank you
@PreludeSon3 жыл бұрын
How is it that Vo1 and Vo2 have different polarity when it connected the exact same way?
@ALLABOUTELECTRONICS3 жыл бұрын
The polarity of Vo1 and Vo2 is different for only differential input. For the common mode input, it is same. And that's why for the common mode input, the differential output Vo1 - Vo2 is zero.
@ececse5 ай бұрын
Thankyou sir
@Mahmoud_Esmat2002911 ай бұрын
Can i get this slides ,please ?
@anithalv73753 жыл бұрын
Superb
@mnada723 жыл бұрын
How to split the signal that need to be amplified to vin(1) and vin(2)
@ALLABOUTELECTRONICS3 жыл бұрын
If true differential input signal is not readily available, then the differential input signal can be applied at only side. And still, it is possible to obtain the similar result. For more info check this simulation. www.multisim.com/content/WfWiSqnoRcTvjcpFrX3KL9/mos-differential-amplifier/ Here, DC voltage on both side acts like a common mode input to both terminals. While, 10 mV input signal is applied at only one input. The Differential gain is 4. So, differential output Vo1 - Vo2 is 40 mV.
@mnada723 жыл бұрын
@@ALLABOUTELECTRONICS Thank you, but is it possible to generate differential signal out of single ended signal?
@ALLABOUTELECTRONICS3 жыл бұрын
Yes, with the help of a transformer, it is possible to generate the differential signal from a single ended signal.
@jcyan2615 Жыл бұрын
Good content but poor way of presentation, so hard to focus with that accent and tone of speaking, always fall asleep
@sandipmishra28319 ай бұрын
Then go to bed 😪 not on comment section
@sahryun9 ай бұрын
In which accent people should speak English? Come on....
@gorkemozen21142 жыл бұрын
I can't understand your accent, please put subtitles below to the screen
@ebones69572 жыл бұрын
Very difficult to understand ..terrible accent.
@yassinabdullah520911 ай бұрын
Thanks for your good illustration, Could you recommend me good books in this area to study.? And, because I am working in RFIC circuits, do you have any contact information, I can contact you and discuss more about anything that I need to discuss, If you don't mind 😍😍