Detailed Single Storey Estimation of a building by long wall and short wall method

This video gives you detailed estimation of a single storey house by long wall and short wall method. In this long wall and short wall method following is the list of quantities have been worked. Earthwork in excavation, Sand filling in Plinth, PCC 1:4:8 in foundation, Brickwork in foundation, brickwork in superstructure, mosaic flooring, plastering, woodwork for doors and windows explained by Prof. Swati Joshi
Estimation of 2 room building : • Long Wall Short Wall M...
#longwallshortwallmethod #estimationofbuilding

[@Tarun-ye8ek]

Thank you so much mam, a good topic I ever watch

[@structuralanalysisanddesign]

Most welcome, keep watching and sharing

[@Maayon001]

DOUBT 🙋‍♂ : why the front portion breadth is added, and the rear portion the breadth is substracted in long walls? kindly explain it. Otherwise the content was so great. Thank you!

[@gaureshmahajan2673]

Thank you mam,kindly also make video on rate analysis and septik tank estimate

[@JuliusSelyazi-hz2nt]

Thank you so much for this. I'd like you to do for us a more complex plan with many outer corners

[@svamsi9219]

For inside plastering for passage portion, u have taken length as 2.4 instead of 1.8. That might be an error because u have already covered the outer faces of passage portion as inside faces of bedroom and kitchen.

[@botsalakshmanarao9896]

Thank u madam it is a full detailed information

[@structuralanalysisanddesign]

Welcome 😊 keep watching and sharing

[@shubhamkhonde793]

There should be deduction in internal plastering

[@calvinceamollo4853]

is there a video for roof work? I am pleased with your work.

[@CivilEngineeringEdu]

Good content..

[@structuralanalysisanddesign]

Thank you, keep watching and sharing

[@nafly2009]

Why didn't deduction for internal plastering

[@yohanu1177]

Thanks madam 💕🥰

[@manassehamihere2874]

Please why is it that some of the long walls are been added and other been substrated

[@sukruthakrishnan8177]

Please upload the estimation of two storey building

[@ashutoshpatil5240]

Thanks mam👍

[@shanthidevigovindasamy3198]

Thank you mam❤️

[@structuralanalysisanddesign]

Thanks for watching, all the best

[@sandhyamishra6789]

Heya can you give me the full detailed estimate of single storey building

[@diyak4965]

Thank You Mam

[@structuralanalysisanddesign]

Most welcome 😊

[@ajayroj9325]

Thank you so much Ma'am

[@pavansurya4213]

missing the inside plastering detection

[@chandrakalapayam3928]

Why You are not calculated short wall for earthwork excavation

[@muhammadmarafa1666]

A good one

[@rv_edits_28]

Can anyone tell me, how many t - junction's in this plan? If we are solving by Center line method ?

[@adityarathore5617]

Total 8 t joints if m not wrong

[@ayutshisode7835]

54.5 chainage length and 10 no of joint

[@rakshithac448]

Thank u mam

[@jayhawkaahha580]

Very good explain madam thank you madam create more videos of civil engineering videos

[@structuralanalysisanddesign]

Thank you for watching, we will come up with more videos on civil engineering

[@muhammadayyaz3112]

Please tell me about refilling of foundation?!

[@saich8595]

Awesome ❤️

[@structuralanalysisanddesign]

Thank you so much, keep watching and sharing

[@superman6720]

Ma'am in last one wood work work Is that a mistake that height value is inserted in breadth column?

[@alonerider7732]

Back bancher's r watching before es&c exam in 2021

[@structuralanalysisanddesign]

Keep supporting by watching and sharing

[@bujjikanna6992]

I'm first bench but I'm watching now, tomorrow is my exam

[@quietkid3927]

@@bujjikanna6992 Same 😂

[@shaikabdulsattar3121]

Watching in 2023...we r ultra back benchers

[@Ahmad-sc2ne]

Maim centre line method pe ak video please 😢

[@structuralanalysisanddesign]

It is already uploaded

[@Are.you.okay...1]

There are 6 passages..y the no of passages was given 1 in sand filling part

[@Keepitunknown123-j2g]

why beam is not included in the calculation

[@shwetlata5384]

Inside plaster deduction not done

[@Justice12]

I don't understand how you get 4.704 after adding 3, 9.8, 0.8, 0.2 on the main building long wall

[@krishnanshumisra610]

its not adding its multiplication, 3*9.8*0.8*0.2 as you are finding qty in volume so why will u add?

[@sanjaysanju5217]

Solve the centre line method

[@sanjaygopal9293]

Presentation is superrrrrrbbbbb. But explanation could have been more elaborate.

[@kunnakudisrini]

can i download with your permission and if so how am i to do so

[@akhildeshpande5197]

Super 👌👌

[@structuralanalysisanddesign]

Thank you, keep watching and supporting

[@pgarc3493]

👌🏻

[@Hydro-SolutionTube]

mam are you volunteer to share the excel sheet you are using to do this example?

[@windstorm4141]

Name of book please?

[@mbalaji501]

Super informative but for finding long wall length we should add always with breadth but you are subtracting with breadth why?

[@pgarc3493]

We are excavating inside short wall

[@Ashishkumar-gs8mb]

Can use thiw in exams Karnataka Diploma

[@structuralanalysisanddesign]

Yes, definitely

[@Kalyankrishna-cu6sm]

In the problem they have given ratios 1:4, 1:6 Where we have to use them

[@deepisivakannan]

Steel calculation???

[@structuralanalysisanddesign]

Steel calculation is not shown

[@Yash_pratap24]

Lintel nhi hoga mam

[@Fbggfvnnjj]

Maim mujhe bhi class online karna he

[@aksharsoni3869]

Ventilater 😂😂😂

[@onmyway_aathi1447]

👏👍