Allis Chalmers Product Line

  Рет қаралды 25,903

Antique Allis

Antique Allis

Күн бұрын

Пікірлер: 24
@leslieholman3121
@leslieholman3121 5 жыл бұрын
That wheel width setting design was extremely advanced. AC had some great ideas
@observant98
@observant98 4 жыл бұрын
Another great company that went by the way side. Brings to mind Oliver, Minneapolis-Moline and for the most part IH and Massey-Ferguson.
@RJ1999x
@RJ1999x 5 жыл бұрын
The D series, one of the greatest lines of tractors ever produced.
@RJ1999x
@RJ1999x 4 жыл бұрын
@Hunter Jacobs are you stalking me? Lol
@RJ1999x
@RJ1999x 4 жыл бұрын
@Hunter Jacobs lol, I'm not to worried! Nelson Muffler
@glenndickson7627
@glenndickson7627 4 жыл бұрын
My uncle and father both bought D21's in the winter if 1968 to replace some JD 5020s. What a difference! The Allis D21 was twice the tractor of the JD 5020. Then the AC dealer went broke in late 1972 so the D21 with a few thousand hours on it, was traded on a JD4430. Similar hp numbers but the JD had no grunt. We had to take 4 or 5 ft off the deep tiller for the 4430 to pull it. The JD 4430 only stayed for one crop before we ditched it for a Case 1370 which had similar pulling power to the D21. I sure wish I had a D21 today!
@DLTJR1959
@DLTJR1959 4 жыл бұрын
My father sold AC's from 59-83. We had a WD-45 then traded up to D-17's. Finally got a series IV. Also ran a 180 and an 8050. Never had the opportunity to run a D-21. AC rated their HP very conservatively.
@Shipwright1918
@Shipwright1918 5 жыл бұрын
Still have Grandad's D-15 Series II and Roto Baler (first one off the line), a C, and an 8010. As we say every time we go to a meet or a museum, "Where the heck are the antiques? We still use this stuff!"
@adolphsfather4834
@adolphsfather4834 4 жыл бұрын
Same about the museum's and meets
@andrewsimon19
@andrewsimon19 3 жыл бұрын
how do you have the first off the line, our Roto Baler has the number 1 on it.
@Shipwright1918
@Shipwright1918 3 жыл бұрын
​@@andrewsimon19 I'll have to go look at the serial to be sure, but my great-grandad worked for A-C at one of their dealerships in Missouri, and it's been a bit of family legend he got the first Roto off the line. If it's so, the serial is going to be #101.
@andrewsimon19
@andrewsimon19 3 жыл бұрын
@@Shipwright1918 i’ll check later too.
@tractorsold1
@tractorsold1 5 жыл бұрын
Now here's one that I haven't seen before.
@lawnfarmer
@lawnfarmer 5 жыл бұрын
I'd love to have that D-19 in mint condition. Still had paint on the turbo.
@douglasrutherford9133
@douglasrutherford9133 4 жыл бұрын
I miss my grandfather he hadn't Allis Chalmers dealership in Gregory South Dakota not only that we used to do a lot of farming we raised fat cattle my grandfather is very proud of the Allis Chalmers equipment I miss running all that equipment when I was just a little kid we go down through the field and we loaded hit Bales on the hay sled I drove the tractor with the hand clutch when I got to the end of the field I wasn't big enough strong enough to turn it around so my uncle or my grandfather jump up there and turn it and we go back down to field it was the best days of my life I wish I could be back on them tractors again I miss my grandfather and I miss Allis Chalmers
@The1952caallis
@The1952caallis 4 жыл бұрын
Douglas Rutherford , you’re welcome to come over and drive whatever Allis you want.
@adolphsfather4834
@adolphsfather4834 4 жыл бұрын
Where's Gregory I live in herried South Dakota
@observant98
@observant98 4 жыл бұрын
gleanerguy 69 Up the road and around the corner from Burke
@MilkMan608
@MilkMan608 2 жыл бұрын
If the "power crater" concept really worked, how come it never appeared in any automotive gasoline engines?
@jerryhammack1318
@jerryhammack1318 3 жыл бұрын
The designs of many copycats! Built way ahead of its time. Still many of these machines still working ! Can't say that about the current tractors!
@daviweiss4360
@daviweiss4360 5 жыл бұрын
want to see a working T16
@The1952caallis
@The1952caallis 5 жыл бұрын
Yes!
@tacomas9602
@tacomas9602 4 жыл бұрын
I heard that these 300 diesels were a bitch to start when cold.
@SilverGleaner
@SilverGleaner 3 жыл бұрын
About like any other diesel of that day and way better than the 404 Deere. BTW the AC engine is a 301 not a 300. And the 301 was used in the 190, 180, 185, 7000 etc etc. In this film the 262 cid engine was shown in the D19. It is similar to the 301 but the 301 is a much better built engine. The 3400 series engine in the D21 is a 426 cid and started about as a normal diesel for the 1960's did too. The real good starting diesel engine that I know about is the one in the HD11 shown in the film. We have an HD11 and it starts almost as good as a gas tractor.
Safe Farming with Allis-Chalmers
18:32
Randy & Rhonda Larson
Рет қаралды 63 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 145 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
1948 Allis Chalmers Dealer Movie Up Front Model G
10:11
J and L Videos
Рет қаралды 18 М.
More Power To You
18:52
Antique Allis
Рет қаралды 13 М.
1932 - The Invention of the Ford V8 Engine
1:03:15
Aaron Maynard
Рет қаралды 8 МЛН
A Big Job - Allis Chalmers film
19:34
Clinton Forry
Рет қаралды 566 М.
190 Answers
14:39
Antique Allis
Рет қаралды 27 М.
Timeless Tractors
55:24
Iowa PBS
Рет қаралды 249 М.
1950's Allis Chalmers Dealer Movie It's Tops! HD-19 Tractor Crawler
11:31
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 145 МЛН