AlphaRex Step-by-step Installation Video for 2011-2016 Ford Super Duty Projector Headlights

[@tjturner4773]

Just installed Fit was perfect. Watched a you tube video on installing them was very good. Easy Install Came with wiring harness for the DHL option. Will need to purchase a fuss tap separately does not come with kit. The LED are very bright. You get what you pay for

[@diverdown7327]

Why tap into the blower motor relay coil (Fuse 50)?? Love these headlights btw... just finished installing!

[@damonlozano5240]

What’s the price on this light?.

[@bookerwashington7478]

i agree.

[@brianh5393]

I would appreciate knowing how to get both the high and low beams to be on at the same time like in this video.

[@brianh5393]

After over a month still no answer...

[@brianh5393]

@@ypsisteve Clearly you don't know anything about headlights. An Alpharex engineer finally responded to an email I sent them. They informed me the LUXX series is the one in the video and it does in fact legally operate both high an low beams at the same time. The reason the Pro series (the ones I purchased) don't is because of the electrical current load using both high and low beam h7 incandescent bulbs at the same time would overload the factory wiring. For the record my 2014 Toyota 4runner and many other oem headlights operate both high and low beams at the same time. No brightbox required!

[@ypsisteve]

@@brianh5393 You are right I don't know anything about headlights. Here is what CFR Title 49 says. S.5.5.1Each vehicle shall have a means of switching between lower and upper beams that conforms to SAE Recommended Practice J564a Headlamp Beam Switching, April 1964 or to SAE Recommended Practice J565b, Semi-Automatic Headlamp Beam Switching Devices, February 1969. Except as provided in S5.5.8, the lower and upper beams shall not be energized simultaneously except momentarily for temporary signalling purposes or during switching between beams. www.govinfo.gov/content/pkg/CFR-2004-title49-vol5/xml/CFR-2004-title49-vol5-sec571-108.xml

[@ypsisteve]

Some lights can operate high and low at the same time but they have to specifically marked to do so. That is further in the CFR. The overwhelming majority of lights are not so marked in the US and thus it is not legal to convert a light not designed to be upper and lower at the same time to now operate with both upper and lower on at the same time on public streets. Off-road is permitted at any time.

[@Miguel-nz1ig]

Boom roasted !

[@brandonstaires2558]

Will the wiring setup be the same for the LED version utilizing the factory wiring harness and connect directly to LED connectors? Will the LED light output be noticeably greater then the factory bulbs?

[@brendanclark81]

Do you make a matching tail light? Would love to buy these if you can get all 4 corners. The headlights look awesome.

[@_flexxx_]

Isn’t fuse location 50 for the blower motor? Why would you tap the drl to that?

[@reeseotero6619]

I'm having an issue where my blinkers for these headlights were working then they just stopped working. The side marker and rear lights still blink but they blink fast and nothing lights up on the new headlights. I have replaced the corresponding fuzes and relays to make sure those were not the issue and the headlight blinkers are still not working, please let me know what else it could be.

[@MrDethStroke]

For what is the single round conector on the headlights?

[@johnvicol2344]

I have the same question, have you found a answer???

[@nigelgatone353]

The wiring harness which connects to battery with the grey wire was not necessary on my 2011 f250. The DRLs run just fine without it. Kinda confused by this?

[@macintyreful]

Im having issues with my 2011, everything was fine till thismorning, no turn signal on my passenger side, fast blink on the dash

[@Mkearns97]

Same here. My DRL’s seem to work fine without it so I’m not sure of the purpose

[@reeseotero6619]

I am having the same issue on my 2011 f250 diesel. Has anyone figured this out?

[@_flexxx_]

I think it’s in case you have actual daytime running lights…. They will turn on with out parking lights with that harness tapped into the drl circuit. Otherwise the drl will turn on when you turn on the headlight. My 08 does not have drls so I have nothing to tap that too…. So they will just come on when I turn on the parking lights.

[@derrick6112]

Where is the link to purchase you POWER Fs?

[@victorsifuentes3153]

What's the actual name of the lights on this video went to the web site but there not a video I like how the tail light move towards the middle

[@JuanGarcia-wc9sb]

I have a 2017 super duty and I bought used alpharex headlights for my truck but I can't find the guide to install please help

[@christiankuchenbrod3878]

Thanks for this

[@wesleyball12]

Soo it doesnt come with wire harness??

[@damianruvalcaba7393]

did you ever find out if it’s needed or where’d you get it

[@glockracer5482]

What gray wire?

[@keatonblaze53]

Is this the how it’s made guy??

[@danikael2815]

I have a set of alpha rex and they dont do the sequential they advertise for the amber or for the white drl aswell as the set i got doesnt have all 4 beams on for high only 2 at a time top for low and bottom for high not all 4 together for high as advertised really disappointed with my purchase had such great hopes saved for a while to get em and this happens and now i feel cheated out of money

[@lateatday9826]

did you get the pro and not the luxx?

[@dontbetowel]

Had these on my last truck , they stopped working after 6 months. Poor design fit and finish wasnt there either

[@calsup02]

Improved night driving my azz These put out ZERO light

[@yukonstew5266]

... this is automotive butchery, stop...just stop. !

[@danvesa1182]

Alpharex is a garbage company who intentionally miss leads people about their products!

[@bookerwashington7478]

How do you get low beam to stay on with high beams?

[@brianh5393]

I wish they would let us know!

[@timrobison2463]

You use forscan

[@brianh5393]

@@timrobison2463 Yes, I turned on bambi mode and that helps. I haven't found a way to simultaneously turn on high beams and low beams though. Any advise?

[@SourBNU]

The luxx version keeps them both on