OpenWRT - SQM QoS Setup on LuCI

[@VanTechCorner]

1Gbps SQM QoS with the NanoPi R4S running OpenWRT - kzbin.info/www/bejne/qmbbpoevZt2hbJY

[@DanBrianGerona]

Hi, first off, thanks for sharing your knowledge here in KZbin. You helped me a lot. Regarding the link layer adaption, I have a router with a LTE sim on it. My isp link is through LTE. What do you recommend for my link layer settings?

[@ArkoAncelo]

Use AI voice software to dub your videos. Your English is really bad.

[@atmosquake6964]

Hey, just wanted to say that, despite these videos being somewhat old now, I really appreciate the walkthrough that you did, even showing speed tests on your end, even off of your phone. Being able to see that sort of stuff was very helpful. Thank you!

[@Dorkie_Moxie]

You have no idea how happy I got as soon as you brought up the car analogy lol, thank you so much for makin thisssss

[@wii166]

You just earned yourself a lifetime sub thank you so much for these videos you have no idea how hard it is to find guides like this for the GUI instead of the CLI

[@VanTechCorner]

Hi bro, thanks for the comment. A lot of OpenWRT tutorials on the channel, waiting for you to explore. You can check them out at kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@FalloutNewNarwhal]

Better explanation than any other video I've come across. Thanks!

[@VanTechCorner]

Thanks for the comment. Glad it was helpful!

[@mohdzulhazmi5357]

Wow! Been waiting for this! Thanks Van!

[@VanTechCorner]

My pleasure! Glad you like it!

[@WassupFred]

Great Video... Very detailed and explained.. Cheers.

[@technicaldroid4567]

But after reboot it not work when we manually click start in startup then it work how to make it automatic.

[@Embassfield.]

When I update lists I am met with this: The opkg update command failed with code 6. And even when I reboot and it lets me in, I can't install luci-app-sqm

[@29champracer]

Thanks for video! Nice internet bandwidth you have!

[@VanTechCorner]

Thanks for watching!

[@pcpc-r1c]

Can i set up this in asus old wifi 4 router and set up this speed for each ap ? My main router is mikrotik, and for APs i use old one asus and tp link routers. On my network i have simple que and mangle rules on mikrotik, but i want to limit speed for also each ap. So when i have 40mbps internet i want to have in each room 20mbps with mangle rules, and when i start download some files i will have stable internet in the second room.

[@alessandrom3956]

How can I prioritise a device after has been configured SQM QoS Luci on my Flint 2?

[@Hree]

Does SQM/QoS help with LAN latency between devices? Specifically I'm wondering how can I improve Steam Link Remote Play via WiFi on a home network

[@iPtrck]

Can it work on GL iNet Beryl Ax?

[@auslander1026]

13:00 - you disabled sqm on startup; default is everything green is already enabled

[@ValzVlog]

sir the new version openwrt 19.7.7 sqm is not available

[@king4053]

Hello. I have a guest wifi with guest interface which should I pick for the Interface Name dropdown in SQM QoS settings?

[@VanTechCorner]

Hi, you can select the network interface name of the guest WiFi (Network - Intefaces).

[@Mr_Ravee]

Thanks bruh..Worked like a charm👍👍

[@VanTechCorner]

Glad it helped

[@Vall_404]

I want to delete pkg from the router cause i need a more storage is there any unnecessary pkg

[@VanTechCorner]

Do you mean OpenWRT on VMware? Or OpenWRT on normal router?

[@Vall_404]

@@VanTechCorner normal router

[@adibindrianto]

after reboot not work sqm openwrt 22.03, wlan0-1

[@francocastilloAR]

You didn't use dslreports.com that the bufferbloat tells you.

[@portman8909]

Not sure if you can help with this but I'll go ahead anyway. I have a Eero mesh that has SQM turned on. However, it doesn't support PPoE bridge mode so my modem router is configured as double NAT with wifi turned off. I've added the routers DMZ address and forwarded UPnP. Is there any other settings I should check/enable for double NAT to work as smoothly as possible?

[@VanTechCorner]

Hi, I can see that you already done all the necessary thing. From my understanding, no further stuff you can do in this case.

[@connorcampbell8572]

How do I get to that page at 2:00 I'm really frustrated at slow WIFI!

[@VanTechCorner]

Hi, you will have to install OpenWRT on your router to see this GUI (instead of the stock GUI).

[@KuchBhi817]

Great buddy!! Do you also have a video where you have created a GUI fetching information from the AP using UCI?

[@tomtrudel6991]

hi, thanks for your work. basic question, If I want to priorize the playstation 5, Do I need to use QoS or SQM is ok? thanks

[@VanTechCorner]

Hello, In this case you should use QoS which requires further configuration.

[@ikbalyasid]

I have 4 ISP loadbalanced on openwrt using mwan. Can i limit the speed for 1 interface using this package?

[@VanTechCorner]

Basically you can, but better configure it mwan3 instead

[@erikprosa]

Hello. I have a Kimax Boundless NAS, I installed Openwrt-21.02 on it. The problem is that when logging into the NAS Server with Luci, it asks for a username and password, which I don't know what it is. I've had this device for about two years, and I've never used it for this problem. Would you help me? (Powered by LuCI openwrt-21.02 branch (git-21.148.49484-14511e5) / OpenWrt 21.02.0-rc2 r16122-c2139eef27)"

[@cryovaced]

Hello! quick questions: I have recently flashed openwrt on my TPLink WR841N V11. Everything went smooth. Now I have trouble understanding things 1. Should I disable DHCP on modem and let my openwrt modded router do its thing? 2. How do I port-forward and enable NAT, setup dmz for my game servers? 3. How do I give my PC a static IP so that I dont have to manually port forward on assigned IP? 4. Does SQM work right away or do I have to do some configuration to enable SQM? I have 6 users on 8mbps adsl connection and all I want is to have stable gaming pings while my homemates stream/download. Thank you

[@VanTechCorner]

Hey, you can check out the basic tutorial on this playlist and moving on with NAT and SQM. kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@ashrafkhaleelibrahim3340]

Thank you so much for your time and help

[@VanTechCorner]

You are so welcome!

[@田中はくろし]

Very helpful, thx!

[@chadwinters4285]

How can I have place a group of users on a given IP range and limit their download speed ? Is this possible on openwrt ?

[@VanTechCorner]

Hey, I got your question and I am looking on it.

[@miguellorenzosantos8544]

Is it possible to use this in conjunction with dual wan(mwan3)? As I see it, it seems that you assign SQM to only one WAN port. Would it be possible to have another instance that would be assigned to another WAN port? thanks again for the tutorial!

[@VanTechCorner]

Yes, absolutely. You configure SQM for multiples interface, not only the WAN port. I have another video where I use SQM to control the traffic of LAN / WiFi.

[@hiyoshi177]

hello I have seen a new type of qos and is called QoSify do you have any idea what is that, I do not have anything knowledge about networks, but I watch your videos and ai learn something, can you make a video about that, maybe making a comparative or instructive guide about means, utilities and how to use QoSify?

[@daniellartey]

Awesome 👍 can you please show how you set up the ddns.

[@VanTechCorner]

Will do soon. Are you using no-ip or other service provider?

[@daniellartey]

I'm not using any yet

[@VanTechCorner]

Hey, the video is out now. Hope it will help.

[@Totallynotmwa]

I cant install packages:/

[@epic1hit]

can you make a video how to use SQM AutoRate plz

[@limseehong]

opkg install command failed with code 255. I did opkg update already. my current kernel is 5.4.86

[@VanTechCorner]

You are using a snapshot version thus it is outdated. (For RPI 4 there are only snapshot firmware instead of the stable release so it may be outdated in 1 or 3 days when a new build is available). Try to get the sysupgrade firmware and update the router to the latest one, and you should be good to go.

[@dopamyth]

it's maybe ipv6 the prob bro ;)

[@VanTechCorner]

He was able to finish opkg update means there is no issue with IPv6.

[@dopamyth]

@@VanTechCorner ok it's a good news :) for his

[@VanTechCorner]

The reason I know this case clear is because we have a group and he shared his setup before.

[@dhyaneshwarra5851]

the download speeds reduce after doing this, is there a solution?

[@VanTechCorner]

Hi, did you solve the problem? If not, I would suggest checking your throughput before enabled SQM. And then, use this value to configure the throughput for the interface in SQM.

[@dhyaneshwarra5851]

@@VanTechCorner well I removed the ingress and egress speeds, made it 0 and when I check with Waveform bufferbloat, I get A grade

[@VanTechCorner]

Great to hear that. The SQM comes with some queue policy which could help drive the traffic.

[@vutrunghieu3690]

Bác có thể làm video hướng dẫn cài đặt và test sqm-autorate trên mạng LTE được không, rất cảm ơn bác.

[@kamikazee2239]

Good video, however, on a 100mbps connection, I can happily set the speed cap at 95mbps and do a speed test with no latency increase while its running, however, when downloading lets say a game from steam the ping will still fluctuate all over the place, it would be best to test on something that isn't speed test to really check what your ping will do...

[@ziadradman1887]

Great tutorial thanks

[@VanTechCorner]

Glad it was helpful!

[@Djakobinodjk]

Thank you Brother 🙏🏽👊🏽👊🏽🙏🏽🙏🏽🥃🥃

[@VanTechCorner]

No worries!

[@cattivello]

hi. thanks for the explanation. How SQM relates to the use of VPN? I am connecting to PIA. Should I still use the 85% of the ISP speed or the speedtest results (that goes via VPN)? Thanks

[@cattivello]

I made some testing. when set the SQM download and upload speed to 0, my WAN speed is substantially better. Any value as per openwrt documentation (85% or 95%) would cut my speed really a lot. Any idea why is that? I than added the software flow offload and I have increased in speed and latency. In the link layer adaptation Minimal packet size, MPU I set 64 (not sure that had impact on results. Documentation suggested to put 64). I than activated my openvpn client. Naturally I lost quite a bit of speed but became much better than before. QUESTION: Would it be unwise to add a new SQM where I use tun0 as a interface name? Thank you

[@VanTechCorner]

- if you set the download / upload speed to 0, there is no limitation perform by QoS and your latency may increase which make QoS useless. If you want a full speed throughput, better not use it. As stated in the document "The 80-95% range mentioned above is a good starting point, but you can often gain more speed while still controlling latency by making a couple experiments to adjust the settings". You can find the link to the docs in the video description. - for VPN SQM/QoS, you can refer to this forum discussion. I believe it should help forum.openwrt.org/t/solved-sqm-with-a-vpn-what-interface-name-what-packet-overhead/57473

[@lixxus-m]

thank you for video, can i request you do a video where you can limit bandwidth per mac usage, for example if a user reaches 1gb download it stops the internet. also a captive portal wifi tutorial would be really good, thank you for all your videos

[@ukearchit]

Bro Which Internet are you using you ? Can some outside from Taiwan can get it ? I am Asia ! And can also explain the price of the plan are using ? Btw Very good video!

[@VanTechCorner]

Hi bro, I am currently in Vietnam. It is fiber optic internet provided by one of the ISP - Viettel. I am on 200 Mbps plan and montly cost around 480 TWD. The service is only available locally so I don't think you can get it in TW. By the way, how is Chunghwa FTTH service in Taiwan?

[@ukearchit]

Can you make a tutorial on how can we share vps interent to other PC or there is any possibilities we can do it through different way?or can we do port forwarding of rdp to any router

[@VanTechCorner]

Hey, sorry for the late response. To answer your question, it is impossible to do. We are creating a tunnel between our computer/router to the VPS when setting up the VPN connection. Let's say that tunnel speed is fast, but all the traffic is still go to that VPS via your WAN connection, which is limited by the ISP.

[@tonebaxter]

Please consider zooming in on your screen. It’s very difficult to follow or please consider changing your color scheme just for tutorial purposes. Thank you. Great content btw!!!

[@VanTechCorner]

I am on default setting for all - color scheme, scale, display at 1920x1080 resolution. Can I know which part is difficult for you to see? Are you watching the video from a smartphone's screen?

[@tonebaxter]

@@VanTechCorner Yes!! I’ll watch on my laptop in the future. Thank you for responding & Thank you for the great content...

[@FrantiC119]

Very helpful! Thank you!

[@VanTechCorner]

Glad it was helpful! You can also check out other OpenWRT tutorials in this playlist - kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@ECS1190]

Friend, AWESOME VIDEO! I would ask you if you have a script that prioritizes UDP gaming. Thanks again!

[@VanTechCorner]

Hey, one of our friend shared his setup for gaming. You may have a check here facebook.com/groups/vantechcorner/posts/842093689979576

[@alhaddar14]

Thank you Brother

[@VanTechCorner]

You're Welcome

[@XBEAST321]

Thank U So Much

[@VanTechCorner]

Most welcome!

[@rrsdm]

Thanks. me from indonesia

[@VanTechCorner]

Thank you!

[@MyrnaRedinger-j5u]

Schiller Green

[@akebaru3401]

please make video about v2ray/vmess on openwrt

[@VanTechCorner]

Hi, this v2ray is too complicated and I am not really understand the application of it, especially when it is installed on openwrt router. The package is not on openwrt master so it is hard for me to make a video of it. Here is the link to the package & installation, you can try at your own risk: github.com/kuoruan/openwrt-v2ray

[@MailHoaon]

thanks u

[@ShareeJohll-c4p]

McClure Brook

[@PatriciaField-x1b]

Samantha Expressway

[@DarylEverts-b5n]

Tressie Drive

[@CookKama-r1p]

Predovic Hills

[@RobertGarcia-s9u]

Fletcher Pine

[@SeniorMamie-x5t]

Hermina Junctions

[@LockeDelia-y8v]

Boyle Inlet

[@ShonnaJones-j1l]

Bode Rapid

[@alhaddar14]

Hello dear friend. First of all, I would like to thank you for the videos that you can actually do are more than wonderful and I have benefited from them a lot. My friend, is there an addition to the opnwrt program to control the time of running the Internet and turn off the computer where I have a child addicted to sitting on the computer and I want to control the hours that the child spends on the Internet It closes at 9 pm and opens at 8 am, for example

[@VanTechCorner]

Hello, thanks for the comment. I'm glad that you enjoy the videos. I will need sometimes to search for your request, anything I will uppdate you here.

[@alhaddar14]

@@VanTechCorner thanks

[@MrAmad3us]

Are you connected to Jesus wifi ? Geez, I wish I had that internet

[@rauchfrei2020]

Is kilobytes not megabits xD

[@ConstanceLouis-x3i]

Bo Harbor

[@LueDuffee-g7y]

Ross Unions

[@DannieFrankenstein-g3d]

Nienow Courts

[@sergentum]

terrible english, but still usefull video because it's clear what are you doing on the screen.

[@hamzabenjilany7548]

terrible comment we got the intentions

[@Harb000]

Horrible comment 😡😡😡

[@MultiArturo76]

versions do not match, liars