ALUMINIUM EXTRUSION PLANT

TECALEX your best partner for Aluminium Extrusion Projects

[@rlewis1946]

Thanks for posting, especially enjoyed the plant construction slide show at the end! Roy Lewis Atlanta, Georgia USA

[@Emilyogel1]

Gotta admit, the video you guys put in the beginning which seems like your companies main presentation video is extremely well done and appealing. one of the best I've seen ever.

[@abrahamnyangu8319]

OK

[@mohammedrehman4800]

Never seen like this plant , working in aluminum extrusion for 5 years in Gulf region. This is the best i've seen

[@aaronmunozchavez5448]

What a huge factory! Awesome Aluminium Processing :D

[@spacesrelaxing-meditationr6504]

kzbin.info/www/bejne/jZOkfX1qbLB6bM0 This one is huge too :-)

[@frequencydrive]

I worked as an electrician in a plant like this (Alcoa). I worked on all that equipment, troubleshooting faults, etc. That plant is a lot cleaner than the one I worked in.

[@MrNartzz]

a dirty shop/factory doesnt work hard enough or have enough business

[@abebagetutadesse8296]

what does quality mean for Aluminum ? How can we select the quality product from the other ?

[@LAZVANG]

Me too

[@williamreis9024]

Onde e essa fabrica

[@williamreis9024]

Trabalho de operador nessas máquina.10 anos processo top .trabalho numa de 6 polegada.tudo automatizada.to saindo dela esse mês pra ir embora pra portugal.sera q vou encontrar fábrica de alumínio pra eu trabalhar

[@jacksonlefteye]

man that place is CLEAN, good vid

[@thegotoguy100]

I worked for RD Werner from 1990/1996. I was a Die chaser. LOL. Thing's have changed. Nice & clean. The guy loading the die was in no hurry, we changed in under 60seconds. Caustic rooms sucked. Good job though. Good experience.

[@tlarson91119]

It would be my 3rd night working in an aluminum extrusion plant. I'm completely new to it since I've worked as an overnight stocker previously and do computer work. Definitely different kind of work than I'm used to, but I find it interesting. Still learning though.

[@lucienehoglund5485]

MEU MARIDO ERA SUECO TRABALHOU COM ALUMINIO NO MUNDO TODO ALCOA E ELUMA ERA FANTASTICO CONHECIA TUDO DE ALUMINIO,NO MUNDO TRABALHOU NO JAPÃO ,MALASIA,KUALA LUMPUR, CANADA, EUA, COLOMBIA, AUSTRALIA ETC.... ABB E UMA FIRMA SUECA TAMBEM ,ERA UM GENIO !!

[@iancrossley6637]

I never imagined it would be a cold extrusion. Is that possible with delicate profiles?

[@fonnovaluminium3064]

wonderful production line! great!

[@spacesrelaxing-meditationr6504]

kzbin.info/www/bejne/jZOkfX1qbLB6bM0 This one is wonderful too~

[@abdulderaiya7204]

100 % Perfect equipment and layout for profile .

[@S.T.A.550]

@Skitad the process at 1:50 is the extrusion. The ram (big rod) pushes the billet thru the die, creating whatever shape the die is. I should know, i run one of these presses for a living!

[@analoghuman9393]

Automated equipment everywhere and not a single person wearing safety glasses. Niiiiice.

[@msoufian4945]

That’s perfect good job👍

[@ashoka4me]

Alumex Limited is doing same process in Sri Lanka. nice to watch.

[@StefanTolos]

Well done ,good job.

[@Order-in-Chaos]

Even for 2010 that music was a vintage early 90s batch of tracks.

[@metalpartssupplier3948]

Simply perfect ! We are die casting factory in China!

[@eldedohash2447]

I don’t miss the burns AT ALL!

[@user-vl7wv8ts3c]

it is too nice video ,Fully automatic,fantastic industry and plant

[@arjunprasad5792]

朱红 even W WSW even though it is not sweet

[@flyingfarm1]

It was cool seeing the factory itself being put together towards the end of the video. It looks like a massive capital investment. It must take a lot of extrusions to pay off the cost of all that equipment and those dies.

[@Blackridge.]

William Cassidy NO worries, Cash flow all day erryday

[@trekbicycles1]

I used to run a 9" SMS SUTTON in Auburn, Indiana!

[@leogarcia889]

Those jobs are fun I work for Universal alloy I was a press operator but know iam a billet shaver.

[@12vLife]

I have an engineering question. If I lay (3) 48x4x.25 strips of aluminum 6 inches apart and screw them in deep and well on 1 inch overhangs on each end will that support 500lbs? It's okay (actually preferred) if they bend a little .

[@chirris110284]

I love cutting on the fly. I wish my press would do the same

[@Nicho2177]

Where are you guys located? And who do you buy your tool steel from?

[@lbss09]

0:01 to 0:30 just makes me want to listen to the Bigger Pockets PodCast

[@LordFedorHddS]

Why is a front Loading System better than an back Loader? Can you explain please?

[@SuperdaMachine]

Wow, big projector

[@S.T.A.550]

Man i wish my press was as high tech as this! We have alot more manual work to do. This machine does everything on its own!

[@williamreis9024]

Trabalho há 8 anos com esse tipo de extrusora sou operador de máquina acho muito top

[@vespadano1979]

This would be an amazing thing to watch if the process were actually explained.

[@fredpinczuk7352]

Agreed, watching the extrusion process by itself would have been nice.

[@dejupp]

instead of fucked up sounds

[@stevenogborn5892]

I work at an aluminum extrusion plant. A better explanation comes with Ilsco's aluminum extrusion 101 video.

[@stevenogborn5892]

kzbin.info/www/bejne/hmmliIR4hZmJns0

[@pablofernandez8331]

Yo operaba una extrusora así...una 2.800...hay cosas q corregir ahí.falta el gasificado,pronable burbujas d aire si no lo activa ,estirador libera mal.y la cierra corta muy poco las puntas.es probable q la primer camada salga doblada esas puntas...humilde opinion.

[@rakesh2you]

Thanks for showing extrusion process. It is a good videos.

[@spacesrelaxing-meditationr6504]

I would like to introduce this one kzbin.info/www/bejne/jZOkfX1qbLB6bM0

[@Dalar0131]

Me gusta ver los video como se fabrica las percianas con robot yo tengo una pequeña fabrica pero manual y taladro, pero se llega con sacrificio

[@wudemi2039]

clearly production line

[@ckhalexkimhooi]

thx for showing this video. how much is the extrusion machine in USD?

[@tigranartashesyan184]

VERY GOOD ROLLER WATCHED IN ONE BREATH.

[@vmcilwrick12]

I use to run a 7" ube press with granco clark running gear. Awesome job but shit pay.

[@gerardo141140]

I could say about how much it costs the crane cut profile please?

[@TECALEXALUMINIUM]

This is the front loading system. All new modern presses are working with this system of illet loading today.

[@angelbhavikatanwar6484]

Aluminum chahye hmko bhut

[@shimarlie1]

Always wondered how this works. So am I right in saying they heat up the aluminium so it's soft but not melting and then push it through the die like play-doh? Is that it?

[@aluminiumone]

+Frank Rizzo hi, My name is Emre NERGİZ from turkey in İstanbul. Our Company is manufacturing Aluminum Extrusion Profile Dies. I want watch my videos. My videos; CAD/CAM/CAE..

[@EastyUK]

+Frank Rizzo Yes when the billet is rammed into the chamber it actually fills the shape of the chamber with huge force(which creates more heat) prior to actually going through the die. Ali is pretty malleable and much lower melting point than steel.

[@dougankrum3328]

+Frank Rizzo ..Pretty much that is the deal...I worked in Alcoa Aluminum extrusion plant in Los Angeles...1970....things haven't changed all that much....'logs' are heated to maybe 700-750F....extrusion pressure causes more heat and they 'flow' out through the die/s....

[@stclairstclair]

Hey Doug, I've got a question, I cast aluminum in sand molds in my garage, is extruded aluminum tougher than non extruded, I know its not forged but it is forced through the die, so I didn't know if that kind of has a forging effect to the metal.

[@dougankrum3328]

stclairstclair...Yes, extruded aluminum does have a sort of 'grain'....but nothing near the strength of a true forging.... I've spent 4 years at one job milling and welding extruded aluminum (6063)...it machines/welds quite a bit differently than any casting...and any bending should be done across the grain...other wise you can get cracking.

[@pakotzintote]

muy bien

[@stx7746]

Sehr interessant

[@ammarbarbee3180]

How is the extrusion straightened? It looked very wavy at the ends, but someone appeared perfectly straight in later shots.

[@S.T.A.550]

That's the "stretching" part.... The pieces are hooked to stretchers at each end that pull in opposite directions until the profile is straightened out

[@Skitad]

Thank you very much

[@rajak4865]

nice press. what size is it. I have worked on a P15, P38 press here in South Africa. We are still using induction billet heaters. Old Technology!

[@S.T.A.550]

Looks to be 9" press

[@QuestoftheHolyGrail]

how much do u guys pay for a stretcher starting?

[@ketansolanki4735]

very nice

[@ashoka4me]

That is extrude process. Press billet through die(mold).Then according to the die(mold) extrusion profile produce. :)

[@mohamedtalha9357]

Bon courage

[@wong2230]

Thanks for sharing

[@kennylinda7303]

This is the first time I've seen what the aluminium extrusion plant is like. That reminds me of Galuminium's aluminium extrusion.

[@jambexuk]

How much did the plant cost?

[@m.at.2490]

Graet.thamks

[@raj-cr4nl]

Lol at the guy un-banding GIANT INGOTS without safety glasses.

[@Chinese1492]

lovely

[@madoudiabate2741]

c est parfait

[@hernanenlima]

cara impressionante a precisão do processo, tem contado no brasil pra aquisição de um equipamento deste?

[@williamreis9024]

Brasil já tem várias

[@lvindas32]

Aca en Costarica hay de eso marca tecalex tube la suete de participar en el montaje

[@maryjoydejuan6512]

Very nice

[@HORNETEIRO1]

tem uma extrusora tecalex aonde eu trabalho

[@hecke1959]

I wish they had that ,When I worked in extrusion, we had to do everything using the back,and the heat in the summer was a killer.

[@cooliodiablo4571]

I work at an extrusion plant in Fl lol, it’s hot as satans nut sack

[@denniscbrock]

Yeah. I did that in '79. Hot in the plant, then when we started swing shift, the first thing we had to do was drag the racks of extrusions out of the tempering ovens. There was usually one wheel on the rack that stuck...

[@cosmegalceran2472]

Prezado Hernane, Estou em Brasil, eu posso te ligar? Atenciosamente, Cosme Galceran - Tecalex, Responsable del SAT

[@victimovtalent6036]

I wonder how to make a hole in the middle

[@Ain_saleh]

i am working like that work with machin of aliminium

[@sandip0sheta]

hi-tech machine...

[@BirendarSTAR638]

Góod

[@sarunkw9936]

capacity?

[@chootunagar7093]

Bhaii mall Lena h kitna rate h or kaha se sasta milega plz rply bro..

[@ulankhangeldi7815]

What is the temperature of existing rod before extruding?

[@S.T.A.550]

830-925 typically

[@robertocalvario2300]

Disculpe con ustefrs puedo encontrar perfiles de aluminio de diferentes colores Para ventanas ?

[@diopcheikh2900]

J'aime travail ici

[@gadielramirez9905]

Yo trabajo en una compania de esas de aluminum

[@karimaaitelhaj4573]

bonsoir,svp comment elle s'appelle la machine qui fabrique " baguette de finition carrelage" merci

[@joseph-mariopelerin7028]

imagine back in the 40's, every automated parts would've been a German guys ,

[@eliashossain3229]

Is there any scope to know the capacity and the minimum space required to set up the same plant in Bangladesh

[@ulankhangeldi7815]

3-4ha

[@abdulkareemjasim4685]

عمل منتاز مع شركة السندان الذهبي

[@gaellevernay843]

Abdulkareem jasim

[@Blackridge.]

يعطيك العافية

[@Puntigammer1]

Wow

[@adriano47470]

onde fica essa empresa

[@antongulynin]

how much is such plant?

[@shubhampriyanshu1234]

Anyone can tell me where i found this machine

[@adrianalvidrez3670]

Quien vende este tipo de maquinaria??

[@eliashossain3229]

To whom we may contact?

[@LAZVANG]

I work as a presse operator in algeria and i am looking for a job opportunite un Europe in the same domaine

[@tucsonev2062]

How does the 'stretching' affect the QC and dimensions?

[@ldshadowladycadetschendorf2456]

TucsonEV stretch to straighten the metal. Material is not stretched enough to change dimension unless needed.

[@sandyliu37]

we are Chinese aluminium profiles manufacturer,welcome inquiry :008618776151492

[@deepy2281]

I am looking to designing a railway tank using aluminium extrusion as a material,, how big the size is available. secondly, are they available in angle, as a tank construction would require,,,!

[@user-wu5ft8yo3k]

We would like to buy Used Aluminum Profile Extrusion Line

[@user-wu5ft8yo3k]

[phone]

[@user-wu5ft8yo3k]

[e-mail]

[@windowmakerwindowmachinefa427]

Aluminum Cutting Machine in any angle kzbin.info/www/bejne/pauteqSwotqln5o

[@RemoUnderImpact]

I don't understand how there can be a hole in the middle of the extrusion. I'm missing something.

[@mchtclbn9737]

The mold has two component basicly. Bridge die and cap die that's how it is possible. I suggest you search about it on internet, something visual will help you understand better.

[@gleysomrodrigues2323]

sou de natal como posso compra o catalago

[@MSGCGROUPCHINA]

MSGC GROUP CHINA , somos una fábrica de China ,producímos las prensa de aluminio.

[@HORNETEIRO1]

@adriano47470 voce é vendedor ?

[@zakirhussain1705]

Hllo.jie

[@shaktikumar8283]

टोटल प्रोजेक्ट में कितने पैसे लगेंगे और कितने जगह लगेंगे

[@adriano47470]

trabalho numa empresa que fabrica tarugos de alumino para extrusao o nome dela e metalex empresa da votorantim metais fasemos tarugos de4,5,6,7 polegadas de varias ligas

[@lucienehoglund5485]

MEU MARIDO ERA SUECO E TRABALHOU COM ANTONIO HERMINIO ERA UM DOS ENGENHEIROS MAIS CONCEITUADOS DO MUNDO EM ALUMINIO,SEU NOME THORE HOGLUND

[@Demeetrius]

How do you extrude something with a hole in it

[@billfeehan7336]

the die profile is in the center of the die and the billet is pushed around it like a play dough machine

[@nippy2013]

Certainly some room for improvement

[@juttlafamily695]

Dear sir is it possible to give a price on al uminiu extrusion plant 20 to n a day

[@rifajenterprise9733]

Rifaj Enterprise

[@hecke1959]

I seen a Mexican guy get caught in the press when I worked in extrusion, it was not a pretty sight, I worked on the saw and it took to long to shut the emergency button off.

[@imaxpunchingsystems6535]

Hello my friend, please conatct with me : [e-mail] whatsapp number: [phone]

[@JaspreetKaur-nj6pj]

Where is it

[@closeuphridoy9481]

লাইট বক্সের প্রোফাইল বক্সের মাল পাওয়া যায় নাকি