AMAZING! Brilliant ideas & DIY

HOMEMADE STRIP Tools Benchtop Automatic Wire Stripping Machine Strip Scrap Copper Wire.
Use Drill or Handle to Strip Wire
The Steel homemade Automatic Wire Stripping Machine will strip 0.15-inch to 1-inch (4 mm to 25 mm) wire. The amazing strip wire machine easily mounts to bench or workstation. The homemade strip wire tool easily connects to a power drill for automatic operation or can be used manually with the included crank handle.
Stripping scrap wire can result in higher prices when recycling. Depending on scrap metal prices and the size of the wire, this machine could pay for itself in a matter of hours.
Hi, im a Pensioner . Apart from my work i like DIY stuff, lifehacks, how to make, experiments, well everything that can be made by hand in a home enviorment. This channel " Rough Hands and Unusual Ideas " about new and old ideas that you might have known . This channel is a HACK COLLECTION. It’s an entartainment oriented channel, so do not try to repeat at home everything you see, as it might be dangerous. So take care of your health.
DD Groove by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
Green Leaves by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/

[@ahmadkotob6203]

انت رائع ياصديقي

[@abdulhapis3425]

Best.....👍🤔

[@Сварщикподереву]

Сразу не понял , американец без гриндера!

[@wilfridkolarik6110]

Ideas the top, job of professional. Tank you very much for the video.

[@momtajbegom5815]

Ai.rakam.akta.machine.baniya.pathiya.din.ai.nombera.plese.

[@dandobrin949]

Salut.A fost puțină muncă da a meritatat.Baftă și noroc..✋👐🏼🙋‍♂️🖐✋👍🏼👐👐🏼

[@dandobrin949]

Unde este aprecierea?

[@dimitar4y]

Pretty good. Bastard thing will last forever the way you overbuilt it. Fully adjustable too.

[@beingooljalool]

thankyou Sir.

[@adiadrian9451]

Buna treaba bravo!!!!

[@prathmeshmahajani]

So cool!

[@frikkiesmit2695]

I shouldve followed your method

[@jonnydiezpaz769]

Gran pelador de cable. De los mejores que he visto

[@guidodelnegro5091]

uN BEL LAVORO COMPLIMENTI !!

[@АндрейКурносов-ж8д]

👍✊🤝

[@edivandesousasantos2767]

Excelente!

[@crdude44]

where did you get the gears ?

[@crdude44]

never mind ,I should have paid closer attention.very nice job

[@raymondrudolph8531]

Crdude44 Lol hey how did you like the way he made his blade and adjusters for wire size. I’m gathering materials now to start making my rig. I’ve seen others but his ideas on gears and blade are awesome👍

[@tomsculpture]

a pipe cutter on the tubing would have less material waste and cut it straight across or around.

[@chungvan5706]

Co Bán mat hang nay khong

[@jonas1205]

All fine, but wuy should I need this? Furthermore, the smal cables in are destroyed too! You will get a electric shock if you use this cables without repairing them! Sorry for any mistakes, im German, so my Englisch is kinda rubish ; )

[@JDLarge]

Jonas W it’s to strip copper wire for scrap cash. The whole idea IS to destroy the wire jacket to get at the copper itself... it’s for wires no longer needed, very handy helper tool

[@jonas1205]

@@JDLarge oh, okay thank you! Didnt tought about this. So now I know that I dont need it, but some other guys will need it. Thanks

[@werschkowdennis6533]

Да, по моему стоит Доктору Дью обратить внимание на эту самоделку. Там не так всё гладко как нам показали. Особенно с тонким кабелем.

[@ВаляВалентинова-й1ф]

тонкую жилу 4 квадрата можно стриппером чикнуть

[@raymondrudolph8531]

👍

[@khrshidahmad8533]

hi where I can find machin and how much it will cost me

[@denismagnaval3467]

Bonsoir tu oublie sous couche avant de peintre ?

[@chrisgarcia5767]

Anyone else cringe every time he picked up a tool?

[@patprop74]

yup bought myself one of those brilliant idea things from china with an electric motor and transfer case all nicely built-in, for far less money then I would have to pay myself to build it. I know there is a lot to be said about making our own things lol but sometimes it just doesn't make sense.

[@patprop74]

@oieweyYou don't understand what I am trying to say? Do you need me to draw it in the sand with a stick to make it any clearer for you? his " AMAZING! Brilliant ideas & DIY" is not his and the product is already mass produce in China for less money then someone's time is worth Unless you are flipping hamburgers for a living! in which case, one has no ambitions and would never need a wire stripper, it's to much work.

[@orlav1419]

Процесс и задумка хорошая, только непонятно для чего эта механизация, только для переработки металла

[@miha50pskov]

извлекать медь

[@ВаляВалентинова-й1ф]

@@miha50pskov алюминий

[@ИльяЗубов-м6н]

Не проще ли разрезать метр провода ножом, а не строить космический корабль? Нецелесообразный аппарат, хотя исполнение хорошее

[@MirovoyChell]

Если у тебя не метр?

[@MikhailMamaev58]

Good work but i didn't understand main goal. Do you get the copper for a melting?

[@hahahaO_o1983]

К доктору дью срочно...

[@hahahaO_o1983]

Поддержите классом. Не умею отправлять ссылки. Доктору дью

[@tonytony1978]

👍👍👍👍👍👏👏👏👏👏🇧🇷🇧🇷🇧🇷

[@arnou.1120]

Dreadful! As you watch it you believe it is one of those „Thumb cut off while drilling“ horror videos.

[@ЕрнарЖуманбай]

Это можно канцелярском нажом быстро без станка для тебя дизлайк

[@channing71]

🔥🔥🔥🔥 1:20 🔥💚 👇👇👇👇👇

[@ДимонБабурин]

Поставил дизлайк, из за флага США, зачем он на станке нужен?

[@andreybuhta8110]

Бесполезная хрень , снять только внешнюю изоляцию неспособна режет все подряд , а разобрать на метал проще выжечь

[@КириллНауман-й3л]

Жженый металл дешевле ценится, по крайней мере у нас в Оренбурге. Моему тестю такую надо, вечно всякие огрыски собирает из проводов, чистит и сдаёт.

[@cubicinches18]

Thatb is over engineering for a job you do once in a blue moon

[@oldroslynboy]

You usually come up with something pretty cool and interesting......not this time, this one sucked.

[@MrNovruz]

Nice work !!!!+++++