Amazing new Tool Tech, Inventions & Equipment from Sema coming out in 2020 4 k video

[@DuncanMargetts]

Wow... that "ni hao" stuff was really cringy at the start.

[@miketerrine1131]

Definitely. Imagine you got o China as and have a booth at some trade show and some loud obnoxious idiot comes around shouting HI!!! HI!!! HI!!!

[@55afishead]

@@miketerrine1131 Yea it's pretty disgusting!

[@MjkillerXD]

Mike H relax

[@mrpanda2655]

He’s a real idiot

[@effyou128]

Its was def Pathetic!

[@omarvera2641]

The beginning was so cringy man ... please don’t ever do that again lol

[@macbook802]

When they were making donkey noises to every asian?

[@jaykeinnes6793]

Glad I wasn't the only one to feel this, just say hello😅🤣

[@Devlin85]

Typical arrogant Americans

[@onthejob9153]

When you see something like that the 1st thing you do is jump to the comments 😳

[@hikikomori_999]

Chads being Chouds

[@E_U_O]

The first 15 second clip is real bad. No joke, just bad.

[@richardbrown5057]

This is why the world hates America

[@E_U_O]

Ask me why the world hates China

[@PrecisionCSGO]

Justin Brink why does the world hate China?

[@E_U_O]

@@PrecisionCSGO Let me count the ways. 1) concentration (forced labor or reeducation) camps 2) world's worst polluting 3) a propped up fiat currency 4) their leader is a despotic dictator 5) Communism

[@DaytonH27]

Justin Brink 🤣🤣 literally not one of these is accurate

[@Mrstreet1999]

Spot the Americans, shouting “Ni hao” obnoxiously

[@Novagunner]

first thing i thought lol

[@dafirnz]

Spot the Americans, shouting obnoxiously. FIFY

[@lucky232323]

Two oblivious douchebags who think they know everything.

[@mpua3009]

I'll giess boxes prnted in USA but inside its Made in China. Haha

[@fuyou1999]

Shows much they get out!

[@hilaryo8412]

I have had an ecoplug on my car for 6 years it saved me from replacing my pan & I have not had one leak the product is amazing! Saved me a fortune $$$

[@Martian74]

So, your husband owns the company or something?

[@hilaryo8412]

Martian74 lol I wish

[@sdafasdfasdfsda]

drain plug that's held in by a walmart magnet.....what could go wrong?

[@5jjt]

Neodymium magnets at the right size are really strong. Two quarter-sized magnets stuck together are nearly impossible to take apart by hand.

[@SKC640]

@@5jjt it doesn't matter how strong they are the vibrations and frequencies from an engine especially a diesel will move it.

[@edgarsalgado981]

Sam klien i mean i don’t know, I’ve had a spare key in a magnetic bow under my diesel for years and its never fallen off

[@dannyyo7948]

hey it does double as a magnet for metal debris in oil!!?

[@tkilg7169]

When and if they start using them in heavy equipment, I might think about using one , but not in our newest vehicle.

[@Donald_Shaw]

Oh Stan, you know I'm a sucker for new tools and gadgets. Thanks for videotaping the tool show for me.

[@Dirtmonkey]

You're welcome Don, hope you enjoyed the vid!

[@LHLgardenservices]

I just cannot believe how many brilliant gadgets, adaptations and tools are being invented ALL the time for our industry....I am intrigued to think what we will be using in say 40 yrs from now 👌👌👌👌👌

[@patrickperry6945]

LHL garden services uk a screwdriver and a voltmeter.

[@jeffssearchforknowledge9931]

Are you guys trying to make yourself look stupid on purpose walking around saying hi to everybody? Lmfao that beginning was hilarious 🤣

[@SuperMIKevin]

I was thinking the same thing, wtf was that?

[@TBONESIDEOFLIFE]

Wow, you love going to these shows. Guess what? I enjoy watching them. A win-win!

[@Dirtmonkey]

Love to hear that, thank you!

[@philmay7834]

Best thing I saw here was those foam inserts for your tool boxes......light, cheap, simple and effective. Brilliant!

[@GonnaRunAmuck]

It's better than the inserts you have to cut the tool outlines

[@scubbarookie]

GearWrench is awesome! The new products are impressive. 👍

[@politicalpartyagnostic268]

That Go Jack Air and the car rollers are cool!!! Fantastic technology!!! Tool Mat is nice!! Thank you Gear Wrench!!

[@sweetkellymay]

If you have a perfectly smooth floor, in your garage..

[@rtta51]

They've been around for years. Parking garages use them when someone parks in someone's reserved space.

[@kevinengland8209]

Great coverage of the show !! Thanks for sharing !!! Good Times !!!!

[@garychandler4296]

Ex-trucker, 34-year contractor. Youstop to check your load straps, but also the LOAD itself! Straps may still be tight, but parts of the load could be shifted, loose, crushing, abrading, etc. The straps are nice, but not a substitute for eyeballing.

[@dmitryfolkin6213]

Good video, good storytelling, good expo!

[@robertbragg9364]

Good video a lot of new cool tools this year.

[@Dirtmonkey]

Thank you Robert !

[@mobgma]

i lold at the mag oil plug. what a maroon

[@chrisdengerd9363]

Sorry i watched this. I know you cant take this back but cmon dude. The start was so gross who edited this

[@andrewmendoza3579]

Yo head ass wtf did jus watch🤣🤣🤣

[@45Deere9500]

Can’t speak to the actual material used, but the Re-Grip makes me think of cold-shrink tubing used on electrical connections.

[@AquaTech225]

Thought the same thing. It’s probably all that it even is

[@ryankelzenberg3453]

Yes, it appears to be a re-branded 3m product. It's nice to see a new application. kzbin.info/www/bejne/hmXMeniEepxsosk

[@malcolmparkins1935]

@D. W. and it appears not heat is applied to shrink it... lol

[@snap-off5383]

@D. W. cold shrink =/= heat shrink.

[@Mutaku]

looks exactly like cold-shrink tubing lol. Never thought of using something like that to regrip things but damn is that a good ideal ol

[@tonyv7660]

Tool vids always the right answer! Thanks!

[@Dirtmonkey]

Thank you Tony!

[@Lucyferbby]

AHA that gojak stuff is genuinely so cool

[@podlinux]

OMG! It’s waterproof! BFD!

[@david-m-creations799]

I like that re-Grip will be using it on my fishing net for better grip when pulling in the big Walleyes .

[@tentotwo8290]

I could watch more of these 👍 I think that they could be longer though. Thanks

[@Dirtmonkey]

Thanks and thanks for the feedback!

[@peterkoza4448]

Another Great show video Stan! Thanks and Happy new year !

[@Dirtmonkey]

Thank you Peter and Happy New Year to you also!

[@chrissheerman]

You are a lucky dude to get to go to SEMA. Thats on my bucket list. Thanks for all the great vids Stan

[@Dirtmonkey]

Thank you Chris!

[@casualobserver620]

Well, since most oil pan drain plugs are either located in the curved part on the pan, or in a recessed area, that plug is worthless. Especially on an aluminum pan.

[@capncrunchwhistle5553]

All of the good products will be counterfeited by the Chinese and available at the Harbor store in a few months, at 1/5th the price, but nowhere near the quality.

[@johnnyspaceman1]

Also available on Amazon

[@killerllama8721]

Got it. Not made in China=5x the price for the same piece of *h**.

[@g4tnewnewg4t48]

American companies give their trade secrets and patents in exchange for the slave labor in China. China doesn't steal.

[@dennislamers986]

Love the gear wrenchs. Thanks

[@joeelias2515]

Wow! Amazing pieces of tools and equipment, I am so proud of American tech and standards

[@tonysnow.7231]

Good stuff guys been enjoying the videos and the channel. Keep up the good work.

[@Dirtmonkey]

Thanks a lot!!

[@kentucky8554]

Great vid! Very cool to give all the plugs👊

[@tonysylvester721]

Love the expo videos. 👍👍

[@Dirtmonkey]

Glad to hear it, thanks Tony!

[@wardor9214]

The drain plug for your oil pan looks very handy to have but I don't know if I'm gonna trust for it to NOT fall out. The torque wrench from Gearwrench looks super nice! Something alot of mechanics would want for sure.

[@micguo2000]

that drain plug is not a good idea. Things can go wrong really really fast

[@patrickmoss6777]

I thought that looked a little skechey myself.

[@GonnaRunAmuck]

Agreed. Murphy's Law.

[@onthejob9153]

He called the drain plug a "permanent solution" that is just as permanent as bubble gum

[@K03sport]

my pan is aluminum...guess I'm not the core market

[@woodlandburl6648]

Yup! I just enjoy seeing these trade shows from my armchair.

[@Dirtmonkey]

That's cool, thanks for being here!

[@b0r3datw0rk1]

Thanks for providing such great content on your channel.

[@Dirtmonkey]

Thank you for viewing, I appreciate that!

[@middletnpyro]

Stanley thanks for putting out another great trade show video for us non industry folk. But seriously keep em coming!!! I'm sure you could do a whole series just from the sema show i look forward to the show every year as some of the products that come out are mind blowing and boggling.

[@Dirtmonkey]

Thanks so much Tyler, I love to hear that you enjoy the vids!! More to come!

[@LouisPeppie]

THAT IS A EPIC KRATOS PIC ON YOUR WALL.

[@VIDEOWATCHERYL]

I'm going to go out and buy all these products, guaranteed

[@Dirtmonkey]

Awesome Luis, thanks for watching!!

[@snap-off5383]

@@taylorsanchez4151 Why broke fool? None of them say "Snap-on" on them. . . .

[@andyellis307]

Great video Stan do as many tools ones as you can

[@DocRorshack]

Love the gear and tool Videos! Doesn't matter the trade...

[@Dirtmonkey]

Thank you !

[@2779mattie]

Make more videos like this man are they cool I’m a tool addict

[@Dirtmonkey]

will do

[@theonlybuzz1969]

Some nice tools there👍

[@Dirtmonkey]

For sure! Thank you for watching Phil!

[@anthonygoodrich6487]

Gear wrench with some great stuff. That cargo glide looks awesome.

[@JayDee-xj9lu]

The guy demonstrating it looks like the life of the party. With enough gear on that rack and the overhang, I think the front wheels might lift of the ground. I do like it though.

[@ilovegodverymuch8791]

You put awesome videos out I love them

[@Dirtmonkey]

Thank you and glad you enjoy them!!

[@llapmsp]

Another great video Stan, love the air car jack.

[@Dirtmonkey]

Thank you Mike!

[@jefferykirk2322]

Sweet tool show .

[@Dirtmonkey]

Glad you enjoyed

[@jefferykirk2322]

@@Dirtmonkey do you have any information on that ford truck with tracks and that killer tool bed ?

[@rahrah8076]

Those gear wrench torque wrenches are awesome

[@timgotto9546]

Awesome as usual stan!

[@Dirtmonkey]

Hey thanks Tim!

[@Squarehead45]

On the 'Re-Grip' I spliced High Voltage Cable for decades, Funny thing is, they used the same thing on terminations and Load Break Elbos. Never thought of using it this way though. Good for him

[@natec599]

Those times you think damn! I could have done that. Hand warmers kill me, but I was born too late.

[@whychry]

Dave in Kauai ,originally from Minnesota love your great videos,gotta watch every chance i get

[@davetscantech]

The guy using the pneumatic jack had great timing when explaining the product, who knew air was loud.

[@YaM0MsAh03]

Dudes a tool using a tool

[@stephenfarynaz7229]

AWESOOOOOOOMMMEEEE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@Dirtmonkey]

Thank you Stephen!

[@acoaxetlawnlandscape6838]

always great. thank you

[@Dirtmonkey]

Thanks Rob!

[@gregmarquez1872]

that dude in the beginning made me want to flag your channel

[@1234cdsarver]

Very cool young man thank you

[@Dirtmonkey]

Thanks for watching Cecil!

[@Guyonthelist]

thanks stan -- I cannot make these, so love that you can bring it to me!

[@Dirtmonkey]

You're welcome Allen!

[@thehappytexan]

Those straps are genius!!

[@muddinrandy]

My work will be at conexpo. Can't wait to see that video.

[@btchllama]

I'm sure the magnetic drain plug would work great for newer vehicles with plastic sumps.

[@johnrooney1860]

Great video thanks gear wrench. John Rooney uk

[@scorpio6587]

How about a video where you and Frankie put that magnetic plug through its paces? That would be rad!

[@akbychoice]

Used HotDoggers on snowmachine exhaust, no hoses to hook up. Used the same system on the semi turbo to cook meals on the haulroad.

[@shakir_ahmad]

They keep saying Nihao is soo cringey yet soo funny 😂

[@vessmachineen193]

IT was really a fantastic video. I enjoyed every second. specially the last tool the micrometer. thanks for the video buddy

[@randallmason9687]

We have had those purple go-jacks at work for years. They work pretty good!

[@K03sport]

...that's nice, but the middle of the rocker panel is not designed to support half the weight of the car. that demo car is going to have a nice bow in the rocker /pinch weld. a tire shop put a bow in my GTIs rocker by lifting/jacking from the middle 😠

[@RoxanaRandomStuff11]

Love these types of videos. Keep it up Stan

[@Dirtmonkey]

Thanks Lawrence!

[@MrMendoza951]

Could of probably cut the first 30seconds of the video...just saying 🤷🏽‍♂️

[@Aepek]

Enjoy the shows you get to for us, that can’t make it. Also, how the squirrels doing😊

[@mrpanda2655]

Aepek lol

[@diversdown2116]

love this there are 3 things im going after thanks Stanley

[@Dirtmonkey]

You're welcome!

[@nicolec7290]

Like that drain plug. Straps to. Foam in tool box

[@vanillagorilla8236]

If Richard rollings and Deadpool had a baby !

[@Squarehead45]

The is NO WAY I would trust OR buy that magnetic Drain Plug,,,NO FREAKIN' WAY

[@peteresposito6638]

Ecoplug products are Distributed Nationally over the past 10 years by the Country’s largest distributors Service champ,Prime Automotive,Filpac and S&E to Quick lubes,Dealerships and Auto Service Centers. With more than 650,000 sold and millions of oil changes performed Ecoplug has not experienced one engine loss or insurance claim. As an online product sold on Amazon and Walmart.com we have earned a 4.5 STAR Rating Ecoplug System provides consumers a lifetime, leak proof inexpensive solution that Automates the oil change process and prevents and resolved oil pan thread damage and oil leaks. Thank you Team Ecoplug USA

[@ctearlybird1676]

You may have one but just don’t know it you tuber

[@eyevincast5440]

Nope wouldn’t get it either......just my preference.... I actually enjoy changing my cars oil

[@scorpio6587]

Wow. What an awesome show. Thank you for posting links to the products, and thanks to Gear Wrench!

[@Dirtmonkey]

For sure, thanks for watching Scorpio!

[@jmackinjersey1]

Gear Wrench has come a long way in the last ten years or so.

[@snap-off5383]

moved tons of mfg from taiwan to china, quality suffered. They're just a re-branding company, their "innovations" are just new tools you can find in many different brands all made in the same factories in china and taiwan. They made their name because their taiwan made stuff held up.

[@jmackinjersey1]

@@snap-off5383 . I did not know that. I do know that a lot of manufacturing in Mainland China is complete crap. But I do like how the drawers held up when he was standing on them, and the box did not fall over either.

[@PitbullSoco]

Because removing a standard oil drain plug takes too long and apparently is too difficult for some people🤦‍♂️

[@jasonborrero3909]

Those ppl shouldn't be under a car period.... let alone driving one 👨‍🔧💀

[@snap-off5383]

Because you took your car to jiffy lube / midas / walmart / etc.

[@patrickperry6945]

Bryan Hadley It isn’t the removal that is the problem. It’s not knowing when to quit tightening for rookies. 😬

[@morphmann]

Love watching your videos, wish we had some of the stuff in South Africa.

[@Dirtmonkey]

I'm glad you enjoy them, thank you !

[@markpowell4701]

Wow, neet stuff ! Thanks again, Stan

[@Dirtmonkey]

Thanks Mark!

[@frank4532]

Very cool and very interesting thank you

[@Dirtmonkey]

Glad to hear that, thanks Frank!

[@alanreynolds2287]

Where has cargoglide been all my life? Here! Take my money!

[@marcusmmcgrawjr1893]

Thanks to both you and gear wrench.... For making it happen. Purchased 2 items that was featured. Greatly appreciated the inside of information that's not always available to that's regular guys

[@lesterxxx7642]

i have always liked gear wrench. i have digital torque wrenches. BUT have to have that torque with angle. good job guys like all ur video's

[@michaellanglie5502]

Go jacks are great I use 3 sets and I can fit 3 cars in a 2 car garage. great product !

[@justjacqueline2004]

Astonishing equipment,loved the jacks and gear wrench. More of these please with more clarity in the sources of the equipment.

[@baronclime6423]

That re-grip is just a slightly better auto shrink tubing that we used on powerline connections going underground. I still have several tools here with my handles covered with it.

[@LogoBallers]

Go Jax model 5211. The jack system that can take cars right off the road and load onto a trailer in less than 3 minutes! Very cool.. lol. New way to steal cars

[@missionDan]

Yet another great tool video. I must say this channel has really stepped up in a great way over ‘19. Cannot wait to see world of concrete. You should attend bauma if someone will fly you out

[@Dirtmonkey]

Thank you for the awesome comments!

[@kfouts2]

I have learned if the Good Lord is willing, it don't matter how much it snows! or how high the creek rises! : ) Wonder if the drain plug folks would pay you to put several in your equipment with GoPro's watching. If the failure rate is zero, I want some! Happy New Year!

[@Dirtmonkey]

Happy New Year Ken, thanks for watching!

[@joehunt3512]

Love these reviews

[@Dirtmonkey]

Glad to hear it, thank you !!

[@kennyclement2823]

Thanks for these!...also look. Into off griders stuff. Knowlage is power! & theres nuthin like the best tool for a job!

[@Dirtmonkey]

Thanks Kenny!

[@Dstromb232]

Nice video!

[@Dirtmonkey]

Thanks D S!

[@kingpuff10]

Dude lifting the car up/ down has my grandpas sneakers on.

[@donohoe71]

Great video, enough to get one interested but not too much or too long.

[@bencjr]

cool!!! can't wait to see future videos, I wonder if they are any gardening new tools show and new varieties of plants.. hmm.? or pc shows etc.

[@jrelectrician4387]

Cool 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼Thank ✌✌✌✌✌✌✌✌✊✊✊✊✊✊

[@Dirtmonkey]

Thank you, I appreciate you watching!

[@PRBB25]

Awesome! Thanks for sharing

[@Dirtmonkey]

You're welcome, thanks for watching !

[@DrivingWithJake]

Woohoo love these videos as always :D Hope you had a Merry Christmas!

[@Dirtmonkey]

Thank you and hope you did also!

[@macbook802]

Re-Grip is an awesome product idea. Has anyone ever got their willy stuck in it?

[@2eyedjack433]

Back in the early 80's there was a guy selling the same thing at ABQ nm fleamarket. If I remember right he said the company went bust and was given some stock to recoup his investment. I bought 2 of them 2 for 5 bucks or something like that. I was probably 10 yrs old at the time but even then I was thinking that's a great product.

[@missionDan]

...i tried the smallest one but it fell off.. 😕

[@brad5750]

Cool stuff !!

[@Dirtmonkey]

Thank you B rad!