Amazing Tool

A creative way to reuse broken and unused tools in milling machines and lathes

[@danielzunigagutierrez6300]

Everything I see in this vídeo reminds me that there is a way to do things right.

[@Miseries_Company]

Honestly I have seen guys make boring bars this way for the lathe. If I had to nit pick that death towel he put in the bed of the lathe is an accident waiting to happen.

[@cdrive5757]

Basically, it's a Boring Head for smaller holes.... Nice! Wakodahatchee Chris

[@Mastermind-]

🙏💐

[@stevewilliams2498]

The most amazing thing was it didn't cut a slot in an aluminium block. The problem still remains but the broken milling cutter was recycled. Truly amazing.

[@rustandoil]

That cloth on the bed of the lathe makes me shudder 😉

[@halfcircleworkshop]

It's a chip guard. I often place a drop cloth on the ways when cutting iron or something else messy

[@mt8149]

@@halfcircleworkshop I think the cloth is a bad idea because it could easily get caught in the turning and cause a bad injury. I'm not over-zealous with safety but that is an obvious catastrophe waiting to happen.

[@sgtphilipm]

Yep me to when I did my training 40 years ago I'd have been slapped and had to lift an anvil for a minute never forgo t again with rags or loose clothing etc near revolving machinery

[@rustandoil]

@@sgtphilipm... You got off lightly!.. I'd have to lift an anvil and stand on one leg 😂😂😂

[@Mrbobinge]

Watched a similar video recently, the guy was wearing a smart silk necktie. You could see those workshop machines drooling at the menu.

[@DewaSenapanIndonesia]

the way you work is very interesting to learn.

[@Mastermind-]

Thank you very much!

[@hectorahumada3542]

Felicitaciones colega, me has dado una muy buena idea. Gracias por compartirlo con todos los que amamos los fierros. También por la herramienta para cortar roscas. Saludos desde el Sur de Chile

[@JimiHendrix998]

I would so like to hear you talk us all through what you are doing and why and what to avoid and what your choice of materials is. Talk to us...

[@seyyedmahdi8666]

Good job But are you irainian?

[@seyyedmahdi8666]

@@Mastermind- دم شما گرم اهل کجایید؟

[@GnosisMan50]

So what did the breakage of the end mill have to do with making a boring bar?

[@Mrbobinge]

Had similar thought. But then the penny dropped (then I realised), he was demonstrating why NOT to throw out broken tool bits: They can be perfect material for DIY custom tools bits.

[@ehsanasgharpour6335]

Best idea , thanks for sharing 👍

[@Mastermind-]

Thanks a lot

[@claudiotadeusilveira]

Ótimo trabalho parabens

[@masterchemist2512]

Your actually the goat, This helped so much thank you.

[@Mastermind-]

You're welcome!

[@zsuzsaraffai519]

Nice video from DIY machinist who just started to learn metal machining.

[@Mastermind-]

Glad you enjoyed it

[@daniloagostini4156]

Brilliant job!

[@Mastermind-]

Thank you very much!

[@Mo_Newzealand]

Wow hahaha Brilliant I like this way of doing ...Subscribed your channel from Newzealand 🇮🇳🇳🇿🇮🇳🇳🇿🇮🇳✌😊

[@Mastermind-]

Thanks and welcome

[@geniuspharmacist]

هل هذه الورشة في مصر؟ ما عنوان المكان؟

[@kentuckytrapper780]

Great video, keep'um coming. 👍👍👍

[@Mastermind-]

Thanks 👍

[@nathkrupa3463]

Mind blowing work sir this is marvelous i enjoyed your video.

[@Mastermind-]

Many many thanks

[@nathkrupa3463]

@@Mastermind- sir please more upload on lathe machine related ideas. Thank you sir.

[@Mastermind-]

Sure , my friend@@nathkrupa3463

[@derouichehassane1811]

Bon continuation

[@tarpans9665]

trimakasih vidio bubutanya sangat membantu kami untuk belajarnya

[@Mastermind-]

Terima kasih temanku

[@ronmurphy9819]

Good job thanks man

[@Mastermind-]

Glad it helped

[@robertqueberg4612]

I like your ideas. My only caution that I will suggest to anyone is to place your machine tools farther from a wall that may prevent your getting away from something flying your way. Be careful.

[@jesusdelgado5610]

que belleza, me encanto, felicidades al gran master

[@Mastermind-]

gracias mi amigo

[@JMCBARNA]

Si se miran con atención los filetes de la espiga roscada se ven bastos a pesar de usar taladrina, eso es debido al método de penetración radial que usa el operario, la viruta no puede salir por el doble filo de la cuchilla y se embota rompiendo los flancos del hilo roscado, la solución es el método "americano" que consiste en penetración angular (inclinando el carro orientable y penetrar con él) ,de esta forma solo corta un flanco de la cuchilla y las roscas salen mas finas, de hecho así siempre roscan los torno de CNC con penetración angular.

[@Mastermind-]

Muchas gracias por su atención y opinión

[@user-dl1te2pf2d]

Молодец

[@boujemaaaitabdelkrim6106]

Bonne idee bravo by!

[@Mastermind-]

Merci mon ami je suis content que ça t'ait été utile

[@danhayward9186]

Nice to see some one duing and not talking

[@faysalkadi896]

The advantages of coincidence..we have the same tongs

[@KORZDAKRA]

very nice 👍 my friend

[@Mastermind-]

Thanks for the visit

[@irish-simon]

where is this AMAZING & MAGICAL TOOL you speak about ?????????

[@Mrbobinge]

Two tools. His two hands. Magic is in the brain. It called skilled ingenuity.

[@AquaMarine1000]

This as an example of machine shop knowledge would fail any proficiency exam.

[@AquaMarine1000]

@@Mastermind-I'm here to help, my qualifications - thirty five years experience employed as a high precision toolmaker in metal and plastic industries working to size tolerances to 0.00005" surface finish 2 micron of inch, other duties include instructing apprentices in their training. Now to your question: It is best practices to clamp lathe tools as close as possible to the tool post. This reduces flex and strain on the machine. Flexing can also produce vibration, reduce the life of the cutting edge and leave a poor surface finish. The work clamping arrangement on milling machine is far from satisfactory. The purpose of the flats machined on the boring bar are not explained. The work piece shown bored on the mill could as easily be machined on a lathe with the correct swing. The work piece being held on a face plate or independent four jaw chuck. There are always exceptions to the rules to get the job done, but on the main best practices should be maintained which incumbences machine shop safety. Cheers

[@johnhili8664]

@@AquaMarine1000 As a machinist of nearly 60 years experience I agree with you 100%!!!!!!!!!!!

[@Mrbobinge]

Step down gentlemen. Remember your learning days. High precision is not direct translation of hand-skills and ingenuity.

[@nine971]

芯は出るのかな？

[@mehmetpoyraz3306]

Frezede işlediğin kare parçayı torna tezgahında dörtlü aynada işleyebilirdin.Dış diş çekerken neden o kateri kullanıyorsun dış kalemle çekebilirsin o dişi ayrıca vidyonun sonunda çektiğin dişin diş derinliği az diş kaleminin 55 yada 60 derece olması gerekli sanıyorum uygun bilenmemiş.

[@kulebyakinjoe]

COOL, WELL DONE!

[@k_o_o198]

The tools that you created out of the broken end mill would have only cost you about $25 to purchase. Unless you are just machining for a hobbie your time is worth way more than it took you to do this. The makeshift boring head is also a very inexpensive tool that can be purchased relatively cheap and have a more precise adjustment. Just because you "Can" do something, does not mean that you "Should". Nice to see that there are still guys around that can make their own tools in a pinch! Maybe teach the new guys about clearance angles on your next video.

[@frontiervirtcharter]

Depends on your situation how much that time is worth .. If there's a deadline and the replacement parts are stuck on a container ship somewhere off the coast of Los Angeles, or if you're in a country where labor is 1.50 an hour, the numbers change..

[@Mrbobinge]

I would've agreed except that we don't all have Amazon/Ebay one day delivery. As you say Time (10 days delivery), is money.

[@marennah5886]

good job

[@Mastermind-]

Thanks

[@Cokhimientay2024]

New subscriber

[@wawansetiawan4042]

Luar biasa, keren,👍👍

[@Mastermind-]

🙏👍💐

[@ramarao4690]

Good Working

[@Mastermind-]

Thanks

[@abdulkhalegalghamdi6635]

👍👌

[@par4par72]

"....WOW...."!!!!!! too cool.

[@johnlucaiii9495]

you made a boring bar. not amazing. not magical.

[@Mrbobinge]

I would've agreed except that we don't all have Amazon/Ebay one day delivery. Time (10 days delivery), is money. The Magic, is in the brain. It's called skilled ingenuity. Others, call it clever recycling.

[@alaasha3ban699]

Brilliant 👏

[@Mastermind-]

Glad it was helpful!

[@narenderpalsingh9076]

Bakwas ye kaam lathe par Jaldi hota

[@petrich123]

Offset boring head.

[@Mrbobinge]

Offset boring reply. Try ordering a replacement part whilst on a ship wallowing at sea desperate for repair. Skilled ingenuity has saved many souls.

[@PacoOtis]

Pitiful video! All your knowledge and talent and you know we come here to be educated and you say nothing? Did an adult review this video prior to release? We hope not! Best of luck, but this is a rather awful format!

[@Mrbobinge]

Say nothing. You'll feel much better.

[@GnosisMan50]

So what did the breakage of the end mill have to do with making a boring bar?

[@frontiervirtcharter]

He made the cutter for the boring bar out of the broken piece from the end mill.

[@Mrbobinge]

​@@frontiervirtcharter Some children also need such explanation - even after 20 minutes of viewing.