Manufacturing Process Of Caterpillar 3306 Engine Cylinder Liner & Sleeves-How Engine Sleeves Made|

Amazing Manufacturing Process Of Caterpillar 3306 Engine Cylinder Liner & Sleeves-How Engine Sleeves Made
(VUAE Cylinder Liner)
Hando Chowk Next to Zain Kanta Momin Pura Road ,Daroghawala,Lahore ,Pakistan.Ph Factory:
[phone]
#manufacturerofenginesleeves #howtoinstallenginecylindersleeve
#HowEngineSleevesMade
#ManufacturingEngineCylinderLinerSleeves
#manufacturingEngineCylinderLiner

[@RestorationVideo]

Great video! Best wishes and greetings to the hardworking people of Pakistan Happy New Year 2024!

[@TheBobdesigns4262]

I love when the one guy is pouring the steel into the mold and sparks fly out and lands in one guy's sandal, and he hops around

[@yarrdayarrdayarrda]

Wow this is the first modern setup I've seen on this channel, even using diamond honing technology. Top shelf work.

[@spicyF1]

lol

[@joemulkerins5250]

For the billion dollar caterpillar company I thought it would have been better but it is what it is.

[@agent_cristianoronaldo7]

Excellent video😊😊😊😊😊😊 thanks for the informative video ❤❤❤❤

[@scottsmith9334]

You guys are Awesome! Thank you. 🎉🇺🇸🇺🇸👍🏻👍🏻😎

[@ershvv7567]

5:44 центробежное литье освоили!Молодцы!!!👍👍👍🤝🤝🤝

[@BROO-tt2mm]

скоро в космос полетят

[@vlad55775]

скоро китайцев обгонят

[@СергейНекрасов-р6л]

Да уж,уровень. А,про тб они не слышали , наверное,никакой защиты,никакой спецодежды,жуть.

[@bekzodxudoynazarov1783]

это где именно не подскажите

[@ershvv7567]

@@bekzodxudoynazarov1783 Пакистан... Заглянул в описание канала,там Пакистан. Но в описании ,можно любую страну обозначить...

[@jaywatson8054]

Great work, guys! Everyone took care and ir shows in the final producr.

[@benjaminyoder4947]

I can’t believe that caterpillar parts are made like this.

[@MrFritzzz666]

Are you sure those are Caterpillar 3306 Engine sleeves? Or your version of a sleeve that fits a 3306 Caterpillar Engine?

[@benjaminyoder4947]

This must there version of how they are made.

[@rosewhite---]

When I started turning in 1962 I was told iron csting had to be left to 'season' for at least 6 months before machining. They were left stacked in a yard for sunshine to season them.

[@Zeusspupp]

and you wonder what kind of places make those fine QUALITY autozone parts? ....now you know.

[@bobg3034]

Great job!

[@Totalrepairsolution]

Excellent work ❤👍

[@bonzai2380]

Material quality is right out the window. I wonder what caterpillar charges for one of these liners?

[@rannyacernese6627]

Looked it up $110

[@rannyacernese6627]

Looked it up $110

[@nikolaos9906]

Great work

[@rosewhite---]

nice to see the turners have cloth sleeves on the tailstock quill.

[@waynekarjala2032]

Notice how the scrap is carefully graded to produce the finest quality cast iron.

[@Pushyhog]

this is work ethic that use to be in usa from 1880 to 1950's. l would love to hang out there a week. These people are incredible in the shop. I have small china lathe from harbor freight/a joke. Wish these people (country) made a mini lathe and mill, l would re-up.

[@rashidzaidi5211]

This is Pakistan where fighter jets nuclear bombs missiles tanks autos etc etc; are manufactured it produces 25,000 IT engineers and 60,000 doctors that many engineers highly skilled and hard working folks It exports lathes and other machinery world wide besides the 4 largest garment manufacturer besides a host of other things. Has the 3 largest copper deposits. 4 largest coal and oil deposits in the world Bad political system besides too much US interference because of geo politics. Thank you sir I hope that answers your questions

[@guzzijohn66]

Surely these don't turn up in a cat branded box. Please tell me they are cheap aftermarket replacements.

[@johnwsinkankas6043]

That was a fine example of a very well made product...probably the best one ever....the machining was supurb !

[@yanchen9211]

Saludos 👋 buen vídeo ❤❤

[@jawedwadood6410]

In this type of work S.O.P. Should be followed Strictly......🇵🇰

[@Pushyhog]

i would use 6 in my pete. denton tx.. Home of peterbuilt. had kw with 3406-c, now l have pete 335 w/smaller cat. now. retired from my 10 car hauler, now lm making a housecar. im likein' the pete 335, never had a pete til 2023. Precision and never a hurt toe, try to figure that out!

[@larryfisher5198]

Slab floor. Shoes. This is a cutting edge operation.

[@LinhTran-ke5un]

Tuyệt với. Toàn các bạn có nghề tiện nguội. Đỉnh cao chính xác tỉ mi

[@kevinlargemaxhimer2617]

Old ways make hard labor, god i love America

[@zachsmith5216]

Gotta love that dirt floor...

[@TheBobdesigns4262]

3306 is a pretty old motor, which had a huge following in Asia. These are aftermarket sleeves for use in the Local marketplace

[@mediathunder2109]

Alloy is so important in manufacturing you can't just pick any scrap and smelt it

[@rosewhite---]

cast iron is cast iron and OK for basic engines. look at all the old gas engines that worked on railways and in UK/US mills and factories for donkeys years. First factory I worked at in 1962 had a big old single gas engine to power the line shafting, The place should have been preserved as a museum!

[@Оченьжаль-б5д]

Всё круто единственное, это как я считаю, технологический процесс резаньем чуть увеличен, можно более быстрее . А в остальном очень понравилось...

[@КарабасБарабасов-и6з]

Если быстро ободрать отливку в размер, то она из-за снятия внутренних напряжений потеряет форму.

[@artepipa1967]

❤ parabéns a esses trabalhadores show de bola

[@Agboyms]

That’s the reason I don’t buy aftermarket overhaul kits anymore only manufacture kits they will not last

[@horstmuller7512]

A lot of work just for flower vases and a design flaw too, because the bottom is missing.

[@cm5838]

Somehow I have serious doubts that this is a caterpillar plant

[@joemulkerins5250]

I was thinking the same.

[@eduardopatriciolentz5220]

Tecnologia nao tem mas tem qualidade . Da gosto de ver.

[@kazakpsp]

Висящие рукава, перчатки и верхонки при работе на токарных станках - просто клуб самоубийц какой-то.

[@BROO-tt2mm]

и ничего, у всех конечности на месте

[@kazakpsp]

@@BROO-tt2mm У них сменные работники) В Пакистане народу живет больше 230 миллионов, один сломался, там очередь за оградой.

[@mohamedhamidsebsa7791]

السلام عليكم ورحمة الله وبركاته

[@582ChevelleSS]

Impeccable quality

[@steamfan7147]

17:30 if the tool were inverted and the Lathe ran in reverse, the chips would go down into the chip pan instead of all over the operator and floor.

[@wedrivebynight]

Exactly what I thought when I first saw it. I was like wtf are they doing

[@rosewhite---]

If you see how these basic belt drive lathes run they might not go in reverse! 50 years ago when I worked on lathes in UK machining iron and brasses I always had a little strip of Signode strip clamped above the tool to deflect turnings downwards. The boss and other workers laughed at me but the joke was on them. Engineers and people in general can't think laterally?

[@myview1875]

@@rosewhite--- Same here when I worked a manual lathe a single strip of tool packing clamped under first tool bolt. 😀.

[@clarkyeoj]

Amazing Thecnology

[@ГошаВеликолепный-ь1ч]

Какого качества металл из такой шихты получается? Условный люминь?

[@normalek6726]

за то все всегда при деле есть потом что ремонтировать да и металлолом всегда нужен а то домашняя домна встанет

[@quq_CCCP]

Это типичная печь вагранка, качество чугуна на ней посредственное, применяется для литья из чугуна не ответственных деталей, всякие шкивы, крышки люков, корпуса задвижек, труб канализации и тому подобное. Для литья отвественных деталей, во первых металлолом не используют, во вторых используют отбеленный высококачественный чугун который получается в мартеновских печах или электропечах с продувкой чистым кислородом (чтобы лишний углерод выжечь). Тут хорошо если накидали присадок раскислителей.

[@maherbadshaofficial9834]

masha allah

[@leadboots72]

How many careers have been cut short in that casting room?!? No guards on anything, one stumble or trip and it's all over.

[@TheNitram55]

Agreed I have worked in foundries, even back in the 70's our health and safety was streets ahead of this.

[@bittarapitulapie7579]

​@@TheNitram55 means you are very old. At the moment. you are already a grandfather

[@alxvlx9020]

А я то думаю че мы на ман-е постоянно меняем гильзы...

[@TheBobdesigns4262]

When you think about it, it says a bunch about the durability of the old Cat engines

[@bekzodxudoynazarov1783]

What kind of republic is this

[@miketaylor6282]

I bet this is Dorman factory.

[@prakash-m-kullur]

Amazing thecnology

[@issdacbarbosa]

Uma grande empresa lucrando sobre trabalhadores sem ao menos um EPI

[@Berbagicara-ku88]

Amazing

[@miklipesh7745]

16:47 для этого используются экраны, а не тряпка.

[@mistermaster1945]

36:53 GOOD ENOUGH IS NOT GOOD ENOUGH 😂😂😂😂😂 LOL

[@auto4105]

These workers do not have the lowest levels of protection, especially those who work in mold casting.😂😂😂😂

[@buyamerican3191]

OMG, supposed American Caterpillar parts are made in this foreign carnival road show.

[@Vicsonvee]

And they treat them like they are made of eggshells but reality is quite opposite...

[@hardcoreplayafromthehimala4888]

So quality depends on what worker will take from the scrap 😂

[@dudeislive]

No... we adjust the hardness and material composition by adding different materials...

[@dudeislive]

If you wanna see just let me know... i will show you whats actually going on in daily life

[@agungnugroho539]

mereka sudah memperhitungkannya. negara mandiri

[@ionnuone8883]

Well, it's a recycling process 💫

[@severinooliveira2634]

J ​@@dudeislive

[@amarkhan6426]

❤Nice

[@Blazefork]

Unfortunately our regulations have made a lot of things unable to be produced economically in America

[@abomagdyabosaif]

Contact details, country name, city name and machine price are important

[@clemirsouza3774]

Gostei do trabalho e confeqsao das pecas.

[@Raaznama28]

is there any way to contact you

[@Raaznama28]

???

[@ChamkourSingh-k5c]

❤❤❤❤❤

[@alje9059]

No wonder why parts don’t last long

[@siddiquiaalaminetwork5396]

جزاک اللہ

[@abdullayaseen-rq7zs]

100 ❤ 100 ❤زۆر جوانە ❤🎉

[@jlp7289]

Os caras cretica o trabalho deles . Mais não são capasez de fazer igual kkkk . Parabens a este homens da usinagem perfecto

[@captainofindustry6625]

Good enough

[@noe29933]

How dare you wish even worse on theese hard working men ill bet you never did a days work like it 😮

[@johncordova8304]

When you are only in it for the money. This video shows no pride at the caterpillar company.

[@wedrivebynight]

@@johncordova8304This is not caterpillar. This is people making parts for what I assume is caterpillar machinery. Idiot.

[@freeugolnik9248]

Need wear protected glasses!🤓👍

[@ricardolizarraga7755]

Minutos 06:40 le salpicó hierro fundido en el pie al que estaba en el fondo con el celular 💀

[@Galfit_]

No es un problema, no falta mano de obra 🤕🤓

[@shafimafat7184]

માશા અલ્લાહ સબ ભાઈ ઓ કો મેરા સલામ મેભી ઓટો રીક્ષા કાં ક્રેન્ક બ્લોક કાં કામ કરતાં હુ

[@sloo1989]

Даже чпу есть! Уже прогресс нехилый

[@rejuoi9217]

Много ручного труда и дешёвого, что гей ропа, что Россия щас за такое гроши и руками не хочет работать, одни блогеры да Айтишники😊

[@ivanov-lvan-ivanovich]

​@@rejuoi9217Что вы знаете о производствпх в России? Это так к примерру.

[@Bengkel_Bubut_ANDINI_09]

Tecnologi pakistan berkembang seiring waktu

[@jamesbarbour8400]

Shame the same can't be said for their approach to Health and Safety ! Loose clothing around rotating machinery, no safety footwear, no safety eyewear, many accidents just waiting to happen !

[@Bengkel_Bubut_ANDINI_09]

​@@jamesbarbour8400 karena mereka semua selalu bersyukur dan tidak akan mengeluh dengan kemandirianya😊 salam dari indonesia🇮🇩🇮🇩🇮🇩

[@jamesbarbour8400]

@@Bengkel_Bubut_ANDINI_09 try writing in English bozo, I don't know what you've written, otherwise !

[@world.tech12]

that's why cat never broke

[@Francis59flq]

au vus des copeaux c'est de la fonte !!!

[@paulofrancisco565]

👏👏👌👌👍👍

[@muhammadhashim1886]

Aoa sir is factory ka contect number address mill skta ha?

[@klong9269]

OSHA inspector would blow a gasket

[@Pawel33007]

Very primitive work shop circa 1850

[@klafilin4061]

Че за бред, если есть ЧПУ то на нем надо стазу все делать .

[@deriter5464]

на что потом изношенные узлы и оснастку к этому ЧПУ брать? я так понял вся эта карусель что бы максимально разгрузить ЧПУшки по объему работ.

[@klafilin4061]

@@deriter5464 с таким мышлением как у вас чпу вообще не стоит запускать.

[@deriter5464]

@@klafilin4061 а я и не запускаю, не беспокойся.

[@icomservise]

ЧПУ отдыхает!

[@miquelvigorosrigol6634]

HAY QUE PONERSE GAFAS OSCURAS PARA NO QUEDAESE CIEGO.

[@wazzazone]

Yeah they have concrete FLOORS.

[@ЕвгенийЧиняков-ц8я]

А шо за железяки чугуний или сталь?

[@0gpt0]

По стружке видно что чугунин

[@alex_medvet]

🤔😏😎👌👍

[@digger105337]

Does no one other than Westerners wear appropriate shoes to work? 🥾🥾

[@ubersosiska]

сначала хонинговка, а потом за нее зажмём в станок. просто потому что а почему бы и нет. рукожопы.

[@sloo1989]

Ну так главное работает же! Покажи свое производство, "нерукожоп"!

[@ubersosiska]

@@sloo1989ага, ага, как обычно - аргумент "сперва добейся". чувак, чтобы понять что рыба тухлая, не надо быть рыбоведом.

[@deriter5464]

@@sloo1989 а давай хирургам вместо скальпелей ножи кухонные выдадим? ну тоже ведь режут же?

[@sloo1989]

@@deriter5464 Ты до сих пор уверен что все фирменные инструменты делаются в абсолютной стерильности?)) Какой наивный)

[@deriter5464]

@@sloo1989 причем тут стерильность? я что то за чистоту говорил? или ты как особо прозорливый не уследил за нитью рассуждений? ну так я тебе по наивной простоте помогу: в процессе производства на одном из этапов на стенки гильзы нацарапали хон, а на следующем этот же хон уговнякали кулачками патрона токарника. это все равно что сначала заточить нож а потом уперев режущую кромку в железный верстак ровнять обух клинка. хватит проницательности что бы аналогию вкурить?

[@muratdemet9169]

30yillik motor gömlek imalatında çalıştım stresli sıkıntılı bir iş kimseye tavsiye etmem

[@festus51]

As much as CAT charges for parts I expect better than this. Might as well Chinese's pats

[@spnky0071]

good american jobs lost

[@สะมะแอมะ-ม7ด]

😅😅😅 .

[@tungnguyen5315]

h3j

[@niallmckinney5515]

😊😊😅😊😊😊😊😊😊😊😊😊😅😮😅

[@sanchezjl1]

So , when they say “ Made in USA “ it’s a lie

[@jimfarmer7811]

I guarantee you CAT has nothing to do with these parts.

[@بلالکشمیری-ك1ص]

یار خدا کا واسطہ ہے کوئی سیفٹی نہیں کرتے تم لوگ کیا تم لوگ کو پتہ ہے تم اپنے گھر والوں کے لیے کتنے قیمتی ہو لہذا سیفٹی پہلے رکھو 😢😢 مانا کہ تم لوگوں میں ٹیلنٹ کی کمی نہیں ہے لیکن اپنی جسم کی اپنی جان کی حفاظت کرنا انسان پر فرض ہے مالکان کو تم لوگوں سے کوئی دلچسپی نہیں انہوں نے پیسے کمانے ہیں تمہاری جان کی پرواہ بس 2 لاکھ روپے تمہارے گھر والوں کو دےکر ادا کر دیں گے برائے مہربانی اپنی حفاظت خود کرو شکریہ جزاک اللہ خیر ❤

[@peek2much3]

Although I see some improvement coming from PK in terms of shop safety, equipment and surprisingly some use of metrology I see even more inefficiencies/redundancies here. Wayyy too many operations for this simple part. How is it possible that finishing of something like final length cannot be done by one operator? I mean in typical Pakistani fashion too many folks doing just one step. Invest in equipment and operation efficiency. Combine steps to reduce costs and time of completion. This is NOT efficient at all!

[@ivan_filimonoff]

в их случае много людей - дешевле нового оборудования, цену оборудования нужно переносить в цену продукции, эти станки уже окупили себя 40 раз, а люди работают за еду, не имея образования осваивают одну простую операцию

[@КарабасБарабасов-и6з]

Отливка ВСЕГДА имеет внутренние напряжения и если её обточить в размер за одну-две операции, то она потеряет форму и её придётся отправить в переплавку.

[@memyselfandi3925]

Cat turned to low quality junk like most others... sad

[@AmeerAhmed-g8y]

Where is this place that’s my email address send

[@afzalahmedafzalahmed8359]

In Pakistan