Amazon AWS IoT Core using ESP8266 || Creating Thing, Policies & Certificates

[@HowtoElectronics]

For those who are working currently with the latest aws version, there is an update on the Resource ARN part. Replace resource ARN path with * sign. Replacing the path with * will simply allow everything.

[@joaofolgado3316]

why this change ?

[@joaofolgado3316]

where can i find that information ? i like to understand why this is needed and how it works. Thanks :)

[@diyprojectslab1689]

I come here to listen to your voice I love your voice 💖🌞

[@mikeharmon8733]

I just successfully coded this instructional. Impressively documented, minor changes to the AWS Console but still easy to follow.

[@suryajeyanth720]

Can you share that file

[@ravalravi882]

On entire youtube this is the first video for esp8266 + aws . really awesome video..thank you so much

[@HowtoElectronics]

Thanks sir, keep supporting us.

[@ravalravi882]

@@HowtoElectronics please make more video on esp826 + aws iot core

[@cricket514]

@@HowtoElectronics hello, I am getting error of screts. h: no file or directory found?

[@johnmungandi4413]

I am succeed with your demonstration finally but ArduinoJson version error with 5.13.5 working with 6.19.3 thank you for this tutorial your really amazing tutor

[@JT-iw2cw]

Great video, This was so helpful. I love your accent.

[@pavan_3322]

Can you do a video on how to get the real time dashboards based on our data in aws quicksight or Microsoft powerBI

[@valentinasalazar694]

Thank so much fot your video, i've looking for a way to do this, and finally works!

[@ジンギスカン-h2s]

I am going to use it as an example.

[@sushantsuman4329]

try many ways not able to connect AWS iot change region also not works and added all key and certificates properly but not able to do so

[@prakashsontakke8114]

Excellent video demonstration

[@mynulislam1258]

connecting to AWS IoT............. This is the last line shown in the serial monitor. But I don't have any connection. and from the server end, no data is sent. Please help

[@lusis7113]

I am not able to connect AWS with the same code. The cert should have no problems since I tried with ESP32 and it works. Any idea? Where can I monitor the iot core to see logs? Thanks!

[@nileshtak9371]

I followed the whole tutorial but its not working. Unable to connect with AWS. Please help

[@nguyenvanthai9414]

Thanks so much for your great video

[@electronic7979]

Nice project

[@vinodkumarkvinod4966]

Im not able to to subscribe the policy Can any one helpme out

[@pavan_3322]

why is it providing data to aws iot for every 5 seconds. Can't we do it in real time?

[@morto6192]

Can u send iot data to website or apps ?

[@SteveOnIoT]

Yes, IoT core to a data lake or database, then extract the iot data in lamda, use and endpoint created from API Gateway, they use a GET request from a website to fetcth your data

[@sermadreda399]

Great video thank you for sharing

[@13friday71]

I cannot connect to AWS IOT In serial monitor it's show Connecting to AWS IOT...........

[@SoutParl]

same, did you find solution?

[@NamNguyenHai-im4uf]

I have the same error, do you know how to fix it?

[@durveshtalekar9677]

Failed to read from DHT sensor! I am getting this error can you help!!

[@SteveOnIoT]

the problem can be the wrong resistor value, you are on the wrong pin in your sketch, or your dht is wired incorrectly

[@infinitegaming2897]

Awesome

[@rehan_alammmblogs]

Nice 👍☺️

[@vinodkumarkvinod4966]

In policy i added connect public and receive bur not subscribe option can any one explain how

[@SteveOnIoT]

best IoT pactice is to use 'Iot:*' , all access all resources, and then restrict your policy from there for least privilege, don't start off least privilege then try to keep adding permissions

[@Rahul-rr6td]

Sir can I get code of the project "fingerprint based biometric attandance system using Arduino". Please sir. Waiting for a positive response

[@jesuspujantesaez4797]

Hi, nice video but I couldn't run the code after pasting the certificates in Secrets.h. I have the following error: extended character is not valid in an identifier. Can you help me?

[@RPodile]

I am getting timeout error while connecting to AWS

[@SteveOnIoT]

check the monitor tab in IoT core to see if your endpoint is correct and you are hitting aws, if so and no data then check your certificates as they are probably faulty

[@doreenchemweno]

@@SteveOnIoT Also check to ensure that the policy was set up correctly and with the right values you want to poll from. in my case, I had used "ESP8266/pub" and was trying to poll from "esp8266/pub" and then in the connection policy I had mistakenly written ...client/ESP8266/ESP8266 instead of ...client/ESP8266

[@doreenchemweno]

@@SteveOnIoT Thanks for the tutorial very helpful

[@SteveOnIoT]

@@doreenchemweno Anothr easy trick is just to subscribe to "#" on the MQTT test client and you will intercept all topics published to your account in your selected region.

[@arijitpatra398]

Code is not running...it doesn't connect with the AWS...I try all the possible things but doesn't work

[@SteveOnIoT]

check the monitor in AWS IoT Core first, if its not showing a connection you likely have the wrong region or endpoint. If you connected and no data then you likely have a problem with your certificates

[@utsavsharma9921]

Not Working at all

[@prashastitripathi_iit]

Did you find any solution?

[@NamNguyenHai-im4uf]

I have the same error, do you know how to fix it?

[@LoveLySUperJu]

Dear sir I got error -4 form connect to aws Cloud you please suggest clue to me about what happend?

[@ranarehanqaisar2266]

After compiling my code it says "No such harder life " and also gives error on PubSubClint.h need help with any solution for it.

[@neeravdesai3940]

u need to download header files