Amazon Retractable Pressure Washer Hose Reel | Fixfans | 1/4 or 3/8

Today we go over the Fixfans Retractable Pressure Washer Hose Reel. How it works and my 6 months of use with it so far. Enjoy the video and don't forget the bloopers at the end.
Check out my website for more info and giveaways - www.carswithkeav.com
Follow Me on Instagram - / carswithkeav
Products In Video:
Fixfans Retractable Pressure Washer Reel - amzn.to/3VPQ0Nu
Uberflex Hose - amzn.to/43POaxT
Blueshield Kevlar Hose - amzn.to/3JcN7yw
$20 M22 Swivel Spray Gun -amzn.to/3PSNFxk
MTM SGS 28 Spray Gun - amzn.to/3PSNO3Q
Flexzilla Hose - amzn.to/3vC5k5e
Bluseal Retractable Garden Hose Reel - amzn.to/3IdZIRR
Chemical Guys Bucket - amzn.to/3TVQpwq
Jumper Hose for Uberflex- amzn.to/3J9dTrB
3/8 female npt to 3/8 male plug QD - amzn.to/3U9Oi8s
Fittings for crazy adapter:
3/8 npt swivel pair female to male - amzn.to/3TNNCUU
3/8 npt elbow Female to male - amzn.to/3TTgTxp
3/8 npt male to m22 male adapter - amzn.to/3PWHp7Y
3/8 female npt to 3/8 male plug QD - amzn.to/3U9Oi8s
Affiliate Links & Disocunt Codes:
DIT Detail - www.diydetail.com/?rfsn=79604...
Discount Code CARSWITHKEAV for 10% off
Eley Sprayers & Quick Connects - www.eleyhosereels.com/?rfsn=7...
Active Affiliate Link - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
Eley Affiliate Link - www.eleyhosereels.com/?rfsn=7...
Sliplo - HEIDI at or 15% off sliplo.shop/carswithkeav
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/ref/Heidi_the_335/
JDCars - KEAV5 5% off at jd-cars.com/?ref=KEAV
Items On The Wall Setup:
WaterDrop Spotless - amzn.to/3ZyUSWX
Flow Meter - amzn.to/3ENhE41
CR Spotless DIW20 - amzn.to/3BV2GXz
Carbon Filter 1 Micron - amzn.to/3t4XpMD
Chloramine reduction carbon filter - amzn.to/3tbh4dS
Active 2.0 from Active - shop.activeproducts.com/produ...
Active 2.0 from Amazon - amzn.to/43q4vZ9
SGS28 Swivel Spray Gun - amzn.to/3dTuKPh
Pressure Washer Hose - amzn.to/3O1HDYp
3 foot Jumper Hose- amzn.to/46BAQxz
MAD Car Care Nozzle Holders - madcarcareproducts.com
3/8 female QD coupler - amzn.to/3xj224e
1/4 Female Quick Disconnect Set for Wall - amzn.to/48EDMuT
Blueseal Garden Hose Retractable Reel - amzn.to/3RHqdox
Fixfans Pressure Washer Hose Retractable Reel - amzn.to/3LKlZc9
Essential Washer Hose - amzn.to/46z7PCH
Flexzilla Swivel Hose - amzn.to/45urvqp
Brass Garden Hose Angles - amzn.to/3YQ848y
Ridge Washer Nozzles - amzn.to/46cNbbE
15 inch heater hose - amzn.to/46rSP9o
3/4 female npt to 3/4 female ght adapter - amzn.to/3t9JW67
3/4 male npt to 3/4 male npt adapter - amzn.to/3ZTkGgV
3/4 male npt to 3/4 male ght adapter - amzn.to/3RE9v9t
DigiFlow 6710 - amzn.to/3zFsrfa
Amp Meter - amzn.to/3zJtgU4
Blue Monster Tape - amzn.to/3ZArFep
Union Valve - amzn.to/3jSv2wI
Union Fitting- amzn.to/3E7ZMRs
Washing Machine - amzn.to/3K7rktU
3/8 stainless elbow - amzn.to/3E55ljg
m22 to 3/8 female -amzn.to/3Xv22Jp
3/8 male plug - amzn.to/3YAirxy
Products I use
Active Short Gun - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
Cart - amzn.to/3jNalzz
Solo Battery Powered Sprayer - amzn.to/3u6IxKe
Kingkast Waterproof Gloves - amzn.to/3oGitnZ
Syphlid Waterproof Garden Shoes - amzn.to/31Cdhc9
Awesome Multi Tool "Wonder Wrench" - amzn.to/3ghAOTM
De-Ionization - amzn.to/3yNH8bZ
VE52 Pressure Washer - amzn.to/3fWWqp9
VE52 Pressure Washer Alternative (Same unit different cosmetics) - amzn.to/2WrBNK6
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/collections/foam...
Firehose Nozzle - amzn.to/3d9SKLv
Brass Garden Hose Shutoff valve De-Ionization - amzn.to/3d39O93
Small EZ Detail Brush - amzn.to/3i72Qzu
Tire Brush - amzn.to/3ARRh9X
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
#carwash #pressurewasher #hosereel

[@rubenharris9241]

Thanks for doing this one Keav! It’s excellent. I plan to include this in my next build. Much appreciated.

[@CarsWithKeav]

You’re welcome

[@ThisOldDetailingDude]

Great review! You always come up with the best content

[@CarsWithKeav]

Thanks Tim!

[@eastcoastlife3547]

Loving the bloopers man 👍 😂 and great review on this reel.. the added details you include are priceless!

[@CarsWithKeav]

Thank You, bloopers come real easy to me.

[@tyricewilson9084]

Really enjoyed the video and the Bloopers had me cracking up...I really needed that laugh, thank you.

[@CarsWithKeav]

You’re welcome. Bloopers is what I’m best at. 🤣

[@viperrcr]

Great video Keav! Love your content! I think I might try to get this reel setup after seeing your helpful tips.

[@CarsWithKeav]

Appreciate that!

[@alfredoaraiza3228]

Great video! On your recommendation I purchased and just installed this FixFans reel. For those wondering about max hose length capacity, I paired it with a 75 ft 3/8 inch Kevlar hose from BluShield (non-marking). This hose fits but the reel runs out of tension when rolling the hose back in. For me it keeps stopping short at the last 4-5 feet. This is not a show-stopper as you can manually turn the reel and wind in the final feet of hose. I mated this setup to a new Active 2.0 pressure washer and I am LOVING IT.

[@CarsWithKeav]

Appreciate this info and testing the limits for us all. I thought it could fit 75 feet, but as we discussed the tension runs out. It’s not hard to hand turn 4 feet though. Hope you enjoy the Kevlar hose it’s so much lighter and thinner than the bigger 3/8 hoses.

[@jtekz_]

dope video appreciate all the videos you put out! keep it up!

[@CarsWithKeav]

Thank you!

[@GibbyDIY]

Hi there. One thing I did for the Uber flex hose. I cut the black housing off one end, added a M22 male coupler, to at M22-14 female to 3/8'' plug. Works great! You just have to pull the hose through before adding the M22-14 female to 3/8'' plug. Wish I could load a pic to show it. Thanks for all the great content!

[@CarsWithKeav]

That’s a great idea. I have shaved the M22 plastic down to fit other reels.

[@chavezsergio4496]

Hey. Another great video and perfectly timed. I bought the same reel after seeing one of your videos. I also bought the Waterdrop spotless filter system from your review. I’m just waiting on the new home to get built so I can install. Appreciate the install tips.

[@CarsWithKeav]

That is awesome! Do you get to design everything so it will be ready for the system? Like water spigot location, garage drains, electrical outlet and breakers? Let me know how it all goes when you get it setup!

[@chavezsergio4496]

It’s a track home so unfortunately modifications are limited. But there is a 8ft wall section that’s perfect for mounting all the pressure washer equipment and a cabinet for supplies. I have the electrical placed where I want, added wood blocking for mounting equipment, and installed tubing for a future pex drop. Looking forward to having a dedicated spot to install all the pressure washer pieces.

[@CarsWithKeav]

@@chavezsergio4496 Awesome! If you have any question at all feel free to hit me up on IG, Facebook or email. I’m always around at some point could be a few days, but I always answer.

[@JoshPhillips7781]

I converted an air reel. Using a flexzilla hose on a Reelworks air reel. Had to cut a 1.5" hole with a rubber grommet and m22 adapters. Works flawlessly.

[@CarsWithKeav]

That’s awesome! Hopefully it hold up as that is a good deal. I have heard of some having blown out. I think it all depends how much PSI your pushing.

[@JoshPhillips7781]

@@CarsWithKeav It's hooked up to an Active 2.0, do it isn't crazy pressure. I usually use it with a 5.0 orifice nozzle, so it would shock me if I'm pushing more than 1,000 PSI. If I were using a much higher PSI machine, I probably wouldn't risk it.

[@CarsWithKeav]

@@JoshPhillips7781 5.0 nozzle you are probably in the 700 to 800 range. Much safer than running say 1000+.

[@ken8516]

do you have a vacuum breaker or backflow preventer at the spigot/hose bib? do you get any back pressure of water squirting out at any couplers?

[@CarsWithKeav]

I have not had any back pressure issues and do not have any breaker or preventers. I have tried probably 20 different pressure washers without issue. Well either it hasn’t happened or it has and my piping was strong enough to withhold it.

[@ChiGalKMcAcura]

I’ve been looking for a retractable hose reel. This looks easy enough too. Do you have to mount or can I sit it on the ground until I find the perfect wall spot?

[@CarsWithKeav]

It will need to be secured to something very heavy as the tension to unlock and pull the reel would make it impossible just sitting in the floor.

[@NextMRV]

this was made for detailing so i understand but I wish there was a 200ft 3/8 option so I didn't have to use a manual reel for my rig

[@CarsWithKeav]

Me too! I think it’s the amount of spring force needed to be able to retract that distance of hose?

[@KenyonPayne]

Have you reviewed the 3/8 x 100' uberflex hose? Curious how it is vs kobrajet and blue shield

[@CarsWithKeav]

I have not yet, but sounds like something to look into.

[@mytrung]

Damn this looks so good. My only reservation was a manual reel might be annoying to use. Hopefully there’s a bigger 100ft one variant soon. But for now I think this is the route I’m going! Thanks as always.

[@CarsWithKeav]

Manual reels are annoying, but one thing about them the hose reels in way more uniform and nice on them. Retractable ones being so much narrower they don’t reel in as uniform.

[@mytrung]

@@CarsWithKeav With this in mind, you are on team retractable or will you switch out the the manual reel in the future?

[@CarsWithKeav]

@@mytrung I’m always retractable if it is possible. As long as it can handle the pressure rating I’ll be using.

[@wescat2]

If we ever move and I get a garage I want one exactly like Keav 😀

[@CarsWithKeav]

Just promise me if you do to get a legitimate drain system and don’t chisel two miles on drain channels. 🤣

[@wescat2]

@@CarsWithKeav The question is. Would you do it again or spend the extra for a drain system. I know why you did what you did though.

[@CarsWithKeav]

@@wescat2 if I knew the channel would eventually make enough money to pay for a legit drain system I would have gone that route, but I had no idea so just did what I had to do. If I knew then I would have brought somebody in to shave the floor to drain from all walls to the center and put speed drains on the outside then a big drain in the center into a trap. Still might try that out one day, but still so expensive. Recent visit to Gtechniq works facility inspired this train of thought and that’s what they did.

[@kevinstover5155]

I have the same but different brand. Got it for $94 on sale 2 weeks ago. Already converted it to my Comet 1700 with their hose. If you let it unwind uncontrolled, lookout, it’s got some danger to it. Ask me how I know. Not much of a pain to Frankenstein but had to order npt 15mm connectors. Works great!👍🏽

[@user-zt6ee5iz6o]

That’s quite a savings, what brand?

[@kevinstover5155]

@@user-zt6ee5iz6o ReelWorks Air Hose Reel 3/8" Inch x 50' Foot Heavy Duty Industrial Max 300PSI Flex Hybrid Polymer Hose

[@CarsWithKeav]

Be careful with that as it’s not meant for pressure washers. I know a few who have had them blow up on them. This one is built for 4k PSI and meant for water. I do know many who used air hose reels and it’s working others not so much.

[@seanj-ski1352]

I built a pressure washer set up using the Merlin retractable air hose reel from Harbor freight. Unfortunately I keep getting a leak on the swivel as I think the O-rings are not intended for high-pressure. I’ve replaced them and it still starts to leak again. Can you or anyone recommend a replacement swivel or some other way to deal with this? TIA.

[@CarsWithKeav]

I am unsure on that I know some have tried to turn air hose reels into poressure washer reels, but I never went down that path. I hear its better to stay closer to 800 PSI versus 1k PSI and you tend to have less issues. Maybe somebody in the comments will be able to help. I know I have seen many nightmares with parts blowing failing and leaking and a few where parts blew off. Many end up no longer connecting the pressure washer and just use the reel for the hose storage then take it out each time to use.

[@obyelectronics...3701]

Hello ... any idea if 1/4 hose 100ft would retract properly on this reel ?? .. Thanks !!

[@CarsWithKeav]

It would not as the max rotations stop right around 60 feet. Even though it’s a smaller diameter it would still require the same amount of rotations. Somebody tried a 75ft hose and it left them with 10ft left to reel in.

[@Ecdetails]

Keeeeeeaavvvvvv, Bro I im a cox guy

[@CarsWithKeav]

If I was running a 100 feet of Kobrajet blue jacket I would go with a cox real probably. 50 feet and a light hose retractable all the way for me. Nothing is better than an IK foamer that I have tried. As a sprayer I like the old Solo which they don’t sell anymore. You’ll just have to wait till November to find out about the new IK battery sprayer being delayed till 2025. 🤣🤣

[@nick-3808]

thank you for all the testing. What quick connect you used for the Aramid to the reel quick connect. female 3/8 to what? NPT? by the way hard to find 50 footer one.. only 75. I am going to test your idea that 75f can fit. Also 23 turns is the max this can be wound. will not go more 🙂

[@CarsWithKeav]

I used female 3/8 not to 3/8 male plug QD. It should fit only thing I’m not sure about is will 23 rotations be enough for 75 foot to reel in.

[@nick-3808]

@@CarsWithKeav in the owners manual page 5 under item 4 they mentioned the usage of 65 foot hose to rotate to 22. probably you are right it may not take 10 more feet.

[@CarsWithKeav]

@@nick-3808 You get to be the guy that proves them wrong now!

[@1stfrompuertorico568]

Nice

[@CarsWithKeav]

Thx 🙏

[@ShasCarDetailing]

Nice informative video and as always love the outakes. Did you have a review on the BluShield Aramid Braided Rubber Pressure Washer Hose? Whats the main benefits over the uberflex? I have been looking at this retractable reel myself. The reel is priced well and the main thing i was looking at was the weight as well because it does not come in super heavy.

[@CarsWithKeav]

I actually did a video on that hose and compared it to Uberflex and other hoses as well. Main benefit is weight and diameter. ANother great benefit is it acts like a big heavy 3/8 just laying on the ground, but is much lighter and I think more flexible. kzbin.info/www/bejne/mabaaaOpZc2Sjqc

[@ShasCarDetailing]

@@CarsWithKeav Thanks for the video link i check it out. All the items are being documented in my mind lol until i can afford the upgrade as prioritizing other items. Though curious with the hose as paired with the reel is better. Cheers

[@CarsWithKeav]

@@ShasCarDetailing if looking at buying a hose and a reel this might be a better choice. amzn.to/3TTdOgV It’s a little more than the combo I made, but it’s all put together already and it’s a great brand.

[@ShasCarDetailing]

@@CarsWithKeav do you know what the weight is? The reason being is i'm wanting to build some sort of cart that can house a pressure washer, reel and garden hose reel that i can lift in and out of my truck as i do not want it fixed down. So as i am lifting it up and down i am trying to shave of as much weight as possible. The manual cox reel comes in at 18 pounds which i prob attach the garden house but like the idea of a retractable for the pressure washer as was not too much heavier. However if that reel was over 30lbs i would not consider it and go with other reel if that makes sense. But yes i saw that reel and looks good but could not find out the weight?

[@CarsWithKeav]

@@ShasCarDetailing Scratch that I just checked and the listing says polyester so doesn’t sound like it’s the Kevlar hose. The fixfans I reviewed is 25 lbs as retractable will be heavier due to the mechanisms involved. A manual reel will be much lighter. On a cart hate to say it the Manual reels are going to fit way better. The retractable ones stick out to far in my opinion. Unless you can get it mounted inside and not hanging off the side.

[@dannysuarez6923]

Hey Keav, did you ever try the MTM Manual reel? Do they actually make there own or is it the same one a lot of people sell on amazon? Trying to find a good reel that doesn't break the bank and that I can just mount and install without buying a thousand different adapters. It can be manual, I don't need retractable.

[@CarsWithKeav]

It looks to be the same that you see on Amazon. They have a stainless one that looks nice for like $115.

[@dannysuarez6923]

@@CarsWithKeav the 100ft one in stainless is out of stock

[@CarsWithKeav]

@@dannysuarez6923 I know quite a few people who have been buying them lately. I know 50 foot is still available. The 100 ft is probably the most popular.

[@dannysuarez6923]

@@CarsWithKeav Is my next choice a 100ft coxreel?

[@CarsWithKeav]

@@dannysuarez6923 If you want to pay that type of money I mean they are real nice. I have only used the Amazon one and had no issue with the several that I have had.

[@melvinventura2614]

I have blushield. Comes with the hose Everything assembled just plug and play. Better value for $250 with the high quality hose . I got mine at tool barn for less than $200

[@CarsWithKeav]

Tool Barn went out of business online last month. I had seen their site before and wondered how in the world they could sell things so cheap and just was always sketchy about them. Should have made some purchases before they closed. Did you get the dual arm or single arm? I think now Amazon at $369 is now the cheapest with the hose which still isn’t that bad of a deal.

[@melvinventura2614]

@@CarsWithKeav I ordered the single arm and received a dual arm with 1/4 hose. That was a good mistake from T barn. I was impressed on how heavy duty this thing is. I saw the single arm regular hose reel in use at a comercial place and looks heavy duty too. They sell directly to retail their retail site is called THE BLUE HOSE. currently there is a 25% off added to the cart when you go to check out. So the single arm will be close to $250 with the coupon and 50ft hose . I’m surprised the guy that sells fancy garage stuff has not found this brand, they have a full stainless steel option for $1k

[@CarsWithKeav]

@@melvinventura2614 I see $250 with the 1/4 hose. I have that hose and didn’t like it. Not saying it’s not good just having the Kevlar (Aramid) hose kind of spoils you a bit. It was heavy for a 1/4 hose and basically the same diameter as the 3/8 and heavier. The one I would want is $582 which is comparable to my setup. Just my luck both of the 3/8 ones are out of stock 🤣. This one is $370 on Amazon and $580 at Blue hose site. amzn.to/3TTdOgV

[@CarsWithKeav]

@@melvinventura2614 I’m sure that fancy garage guy has seen it, but if they won’t sell to him the way he wants he won’t carry it.

[@vermontmotorsports1275]

@@CarsWithKeav whoa thats crazy, I was just about to link the Blue Shield and yep Tool Barn was closed down. I literally just got the dual arm 50 ft. PW with the same 3/8 BluShield hose you put on your FixFans. The one I ordered on the TB website was around $185 with tax and free shipping. It came in 4 days. I don't understand how I got it for $185, free ground shipping on a 45 lb item. And now it is listed for $370? I have the exact same one and it came with the same whip and quick connect

[@spencerblack7691]

So I just put in an order for a similar retractable hose reel on Amazon listed as joejet brand was for $169 and that looks to be the exact same one as the fixfans Now just need to pair it with a hose. Putting together a budget setup with a craftsman power washer. Is there a better option than the Uber flex out there that would include quick connects for an easier install? Was looking at Adam’s hoses but they are all out of stock. Thanks! Enjoy the unbiased informative content!-S

[@CarsWithKeav]

I have heard good things about this one, but have not tried myself. amzn.to/4cgz2x6 I have not bought many 1/4 hoses which is perfect for the craftsman. I usually have a good bit of extras from all my Active pressure washers they come with good wire braided stock hoses.

[@spencerblack7691]

@@CarsWithKeav Nice thanks, was going to pair the setup as well with the $20 M22 Swivel Spray Gun. What budget foam cannon do you recommend? I saw the Bear Force one for $28 in budget pressure washer video seemed to pair well.

[@CarsWithKeav]

@@spencerblack7691 I love the Bear Force as a good budget one. It is a bit higher than a lot of them out there, but the weighted ball, balance and other things make it well worth the $28.

[@KingTheDetailer]

You have any video on water pump setup for mobile detailing?

[@CarsWithKeav]

This is the closest I have where I store RO water and use an RV pump to use the water. kzbin.info/www/bejne/eKG0nnh6iq15iLcsi=guGskdxgfykGjW9q

[@KingTheDetailer]

@@CarsWithKeav been looking for a video for a seaflo water pump on how to add a pressure relief valve but I haven't had any luck . A lot of mobile guys are have the problem the the pressure the builds in the pressure washer when it kick back to the pump the pump leaks , so I've heard that a pressure relief valve is needed. I just don't have an idea on how that works figured I would check your channel since you make good content on many things

[@CarsWithKeav]

@@KingTheDetailer I actually just had somebody comment have I had any back pressure issue and do I use a breaker or preventer to stop it. I have heard of pressure washer back pressure, but never had it happen to me or if it did my system handled it. Might be something I want to look into to add to the setup. I’ll do some research and see what I come up with.

[@KingTheDetailer]

@@CarsWithKeav I bought a seaflo pump installed it but the build up pressure would cause it to leak from the seals so I returned it. I would definitely appreciate it you found something and made a video about it. Would definitely help a lot of people especially for mobile guys like myself. I currently rebuilt my van setup and was looking forward to putting my pressure washer in the back area on top of a shelf where its out of the way and not visible but until I don't find a solution it won't happen

[@KingTheDetailer]

@@CarsWithKeav thank you again brother for the reply love the videos

[@basstruckman]

I was in Northern Tool and I ran across #115159 retractable hose reel with 50ft 3/8 for $199

[@CarsWithKeav]

That’s a good deal especially with a hose. They are a similar design. The Fixfans has the double lockers, quick connect setup and an elbow style hookup. So it depends on if you want the hose or the added features.

[@vancelee3506]

I’ve used this reel for about a month. It leaks where the line connects to the reel on the U pipe that the m22 quick connect goes into. I recommend caulking or using some type of sealant below the threaded end that connects to the reel itself. Trust me, do it before you hook the hose up and get it wound. I’m still having trouble with mine. I truly regret it at this point.

[@CarsWithKeav]

Weird have had this on the wall for 6 months so far and no leaks. I did take pliers and tighten that as much as I could before setting everything up.

[@vancelee3506]

@@CarsWithKeavyeah I tightened it too. There’s a review on Amazon where a guy bought 2 that leaked. It’s really hurting my business at this point. I like it other than that. I even tried putting a new O ring in it. Idk, I guess they can’t all be right. I’m just unlucky.

[@CarsWithKeav]

@@vancelee3506 I’m sure the manufacturing tolerances are not the best. What about Teflon tape or plumbers putty on the threads? I know it’s a tight spot to do that.

[@vectorr6651]

I would love to find an affordable DIY 1.5 inch 50 foot vacuum hose reel.

[@CarsWithKeav]

After I get these new pressure reviews done I’m going to look into vacuum reels. Giraffe tools just came out with an all in one unit, but I have no idea how good. I’m also not that knowledgeable with vacuums so got to research before I start reviewing.

[@vectorr6651]

@@CarsWithKeav cool. I find it crazy vacuum reels are a couple hundred dollars.

[@CarsWithKeav]

@@vectorr6651 Yeah especially since it not very high pressure.

[@vancelee3506]

Good luck lol sucks I had to go with cox reel. Idk why it has to cost so much it’s literally the easiest design they had to come up with

[@CarsWithKeav]

@@vancelee3506 Agreed

[@harley1793]

Hello sir thank you for the videos, I almost pee when the bloopers come on , the way you talk to yourself lol, the black hose, can you give me the details po, is it the non marking one?

[@CarsWithKeav]

Non marking hose is gray. I have ever marked something with the black hose though. It’s 50ft and 3/8 inch. Any other details I did a video on it here kzbin.info/www/bejne/mabaaaOpZc2Sjqcsi=vk9EqE7-oaeJbcgL

[@JameboyDancalan]

How much?

[@CarsWithKeav]

Right now they are $190 amzn.to/3WcgTJY

[@cebasmb8250]

Man just get a real hose lol 😆 with a stopper on it

[@CarsWithKeav]

I have a storage bin of stoppers I fricking hate them they get in the way. If it’s not my Kevlar hose then I don’t want a “real” hose. 🤣

[@cebasmb8250]

​@CarsWithKeav I got you lol 😆 I really appreciate and like your videos

[@CarsWithKeav]

@@cebasmb8250 Appreciate you watching!

[@1stfrompuertorico568]

First!!

[@CarsWithKeav]

Again!

[@brentkugler2946]

Just cut a hole today. Uber flex connected right to hub Trying to figure out a better hose that goes to active outlet Stock giraffe one sucks.

[@CarsWithKeav]

Yeah, that stock Giraffe hose is horrible.