Hi. Could you explain in detail how you hooked up the guide wire to the station in such narrow conditions. Manual states you have to take the second end of the guide wire go past the station and hook it up from behind with 1m of the wire at least in the back. How did you do it? Thank you
@johnhall6538 Жыл бұрын
Hi yes I had to bend the rules a little to fit the little fellows base in that tight spot, but its actually quite flexible, sometimes you need to take the wire out of the centre channel and lay it underneath so you can off set the base plate, then test it serval times to make sure it docks nicely, in this video I show my wiring in more detail kzbin.info/www/bejne/qoWnZH53g7OFl7M
@Gragon Жыл бұрын
@@johnhall6538 thank you very much. So from what I saw in the video you provided its not necessary to leave 1m of wire behind the station, you made a 90degree angle and hooked it up
@RussellHogan Жыл бұрын
Would love to have one of these in Hawaii. 🙂
@Gragon Жыл бұрын
Hi. Is it possible to make an area - "no go" area if it has guide wire running through that area? Or the only way to stop robot going to a certain part of the lawn is to physically wall it off?
@ambrogiouk Жыл бұрын
This would not be possible to do with the ZR product suggest you contact support viua email
@bigscreenadz8225 Жыл бұрын
where do we buy in USA? There is great love here for you...
@ambrogiouk Жыл бұрын
www.max-distributing.com/ this is USA distrubutor
@RussellHogan Жыл бұрын
How deep in the ground does the guide wire go?
@ambrogiouk Жыл бұрын
3cm, Wire can be surfaced mounted if secured to ground with plastic nails securely.
@RussellHogan Жыл бұрын
@@ambrogiouk Thanks. Just got the ZR. Trying to understand how the radar works to avoid obstacle. 😎
@ambrogiouk Жыл бұрын
@@RussellHogan the radar works similarly to the automatic radar sensors in a car
@RussellHogan Жыл бұрын
@@ambrogioukThanks. Would not the wire get cut when you scarify your lawn?
@ambrogiouk Жыл бұрын
@@RussellHogan care would need to be taken and the position of wire noted where the wire is installed
@tommyjakobsen5504 Жыл бұрын
wasn´t that not sold as a GPS lawnmover, why is the wire there. That is fake sale.
@ambrogiouk Жыл бұрын
The ZR does not use GPS to navigate the lawn it uses random algorithms.The wire is only used for the robot to return to the charge station kzbin.info/www/bejne/fnbJdGeCaLKZqpo
@YDS19zz11 ай бұрын
It is a radar mower, not a gps
@ambrogiouk11 ай бұрын
Yes it uses radar to identify garden obstacles and presence of grass or no grass @@YDS19zz