2008-2014 Challenger Raxiom Smoked LED Tail Lights Review & Install

An excellent way to add a modern appearance to your 2008-2014 Dodge Challenger is by installing a set of Raxiom Smoked LED Tail Lights that feature sequential turn signals. With a unique race track inspired running light design, these Tail Lights will update the look your Dodge Challenger's rear end and will also ensure that you are clearly seen by distracted drivers when braking.
Quality Construction. Manufactured from OEM grade materials, these Raxiom Tail Lights are assembled to precise standards for long lasting quality. These Tail Lights feature durable, black plastic housings with smoked polycarbonate lenses. Employing red diffused LEDs for use as brake, running and turn signal lights, these Tail Lights use white diffused LEDs for the reverse lights. Each section of the Tail Light assembly is weather-sealed to prevent dirt and moisture from harming the state of the art electronics found inside. muscle.am/2LnYyJa
Shop these Raxiom Smoked Tail Lights: muscle.am/2LnYyJa
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Item CH3762
----------------------------------------------------------------
Follow American Muscle for all the latest Challenger Content:
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger: muscle.am/2ztDN5R

[@AmericanMuscleDodge]

Shop these Raxiom Smoked Tail Lights: muscle.am/2LnYyJa​ Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf

[@machead57]

I have a 2010 Challenger R/T. The old style tail lights is the one thing I'd never change on it. It's truer to the iconic 1970 Challenger

[@okiig6727]

You can always put them back

[@TheeMustangBro]

It’s the only thing that I thought didn’t look very good though, they tried to capture the tail lights but it looked like it fell a little flat, and blocky looking. I thought the raxioms would make a next level charger mod, they look a little bit like 69 lights, and for a project I’m doing I think it will be perfect

[@thrashmetalcd]

I just bought this, can't wait to install!!! Very informative and thorough video!!

[@ghostmalone92]

Have these on my 2012 challenger best look you can go for get alot of compliments 🤟😎

[@xTtownThump24x]

Hell yeah! More of these challenger videos, I’m trying to spend my stimulus!! 😂

[@AmericanMuscleDodge]

We try to push a new video live every couple weeks! More will be coming! -Zach

[@BoomStuff556]

I just installed these on my 2012 rt challenger today, along with the smoked side markers. I LOVE Them! I will be getting the Raxiom sequential headlights next. Sooo glad I found you guy's on KZbin. And of course I subscribed.

[@AmericanMuscleDodge]

Thanks for subscribing and being a part of the AM fam! -Zach

[@aureliuso9706]

@@AmericanMuscleDodge Do you know when these are going to back in stock?

[@pizzaenthusiast7116]

have you had any problems with them?

[@BoomStuff556]

@@pizzaenthusiast7116 Honestly no! And just as easy as the video shows... If you're interested to see, I have a short vid on my channel.

[@mocacreamjr]

when we getting some Raxion halo fog lights 👀

[@AlB1974]

Would you need to cut and splice the wires for the trunk release on the 2010 Challenger SE?

[@Bob-gy6ud]

For R/T the perfect add on is getting old school 69 Charger rear valance emblem make this mod really pop

[@hahalopez7013]

Thank you soo much 👌

[@arcadia5607]

JUST BOUGHT THESE FROM YOUR SITE FOR MY 2009 CHALLENGER R/T!

[@AmericanMuscleDodge]

I hope you love them! Thanks for watching! -Zach

[@pacmanhits]

How are they after 2 years brother?

[@KayKashi]

Yes this is exactly what I want!!!

[@AmericanMuscleDodge]

Thanks for watching! -Zach

[@chrisgraham188]

Wish I could get these for my 2017

[@TheCrimson187]

Extremely detailed video! Quick question: are the install instructions the same on VLAND as the Raxiom tail lights?

[@AmericanMuscleDodge]

They'll likely be similar! Thanks for watching! -Zach

[@zionagnew6250]

No offense on 2008-14 Dodge Challengers they have good raxioum smoke LED tail lights too see that's what I like & love now.

[@jacobgordon5991]

What is the difference between this Raxiom version and the VLAND version?

[@danielcardenez]

How do I fix the fitment? There's a gap above the trunk release. Also the trunk release button is not working.

[@luciienprinc3-molina359]

See I was told my my Challengers seller that the reason he never switched them was because you wouldn't be able to go back to stock if you ever wanted to for whatever reason. So it's great to hear that that is incorrect. I've already dropped 27k in the last two weeks on my Car & getting it on the road. Otherwise these Bad Boyz would already be otw. Nonetheless I cannnnnot wait to get these shipped. I like the Original Single Bar. But then I see them on the road with the Newer Design and Ive fallen in love with this new look!!!

[@OscarZempo-yn6oj]

donde se encuentra su taller?

[@codycasse6915]

I wonder if there's a way to get a longer wire and run it to the black cord just a little detail but it would make it look so much better

[@codycasse6915]

You know what im saying the cord that runs down stock

[@pcmicro3944]

Yes, you can run a longer wire along the right side instead of the left, so it's hidden in the existing wire sleeve.

[@Bob-gy6ud]

I just wished they made it resemble the 70&71 Cuda panel. Personally I think it looks better and with the sequencers would be totally rocking

[@realsoul4465]

I don't know, but the old one like 2008 AND 2009 and above is much and much beautiful more than last one

[@pacmanhits]

I just installed them ill give yall 6 month update soon

[@dndbrek]

I will be getting these sometime this spring for my 10 SRT8 .What did you cut your finger on ?

[@sargentg07]

When he was removing the driver side tail light connector, you could see the inevitable about to take place. Anyone that has worked with these connectors know it's going to happen. Matter of fact I have the same cut on the same knuckle from a connection on the throttle body

[@dennisbogden42]

Do these lights wear down after a while like the vland tail lights do?

[@spaldingmcintosh]

Yes, they begin to split and crack after 1 year

[@beatsbyeverett9055]

Will these fit on a 2019 Challenger?

[@AmericanMuscleDodge]

These lights will not fit on a 2019 Challenger, sorry! -Zach

[@juangonzales7999]

I have a 2018 do you think these lights fit the need to change them?

[@Kamal_AL-Hinai]

Don't change the stock light for vert similar product. It's big money waste. You can use tinted light covers if you want the stealth.

[@juangonzales7999]

@@Kamal_AL-Hinai these tinted lights if they were adapted? The rear ones, the ones that always remain red, were filled with water. I'm looking for where to buy to change them.

[@blumucus]

What about a non smoked version?

[@pcmicro3944]

Raxiom also makes a cheaper non-smoked version but it has an ugly white section in the middle which looks like the stock Dodge OEM version, and it currently requires that you use your old reverse lights unlike the newer smoked version. I wish the smoked version was not quite so dark as when it's parked it looks completely black.

[@RubyXIII]

what if the older taillights were like an led all the way around how the chargers taillights are

[@javiervasquez29]

That's what I would want. If the current light they have was all led they be perfect.

[@pizzaenthusiast7116]

anyone that's bought these, how long have these lasted you? have you had any problems with them?

[@spaldingmcintosh]

They only look good for a little while. Bought these brake lights less than two years ago, they are covered in deep cracks and all the black paint has peeled. American Muscle does not replace these, because they are sourced from China. For $600+ this is unacceptable. This is a cool concept that was poorly executed. Learn from me. Do not let the good looks fool you, they will be falling apart within a year.

[@LKfoodstuff]

Do theses tail lights hold up in time?

[@spaldingmcintosh]

No they crack and look terrible and American Muscle will do nothing to replace them

[@aureliuso9706]

Hey when are these going to be back in stock?

[@AmericanMuscleDodge]

These should be in-stock later this winter! -Zach

[@landenreeves6410]

@@AmericanMuscleDodgeso like next year?

[@IceRhino44]

I feel like for $600 they could do something better than running wires to the center light on both sides and leaving wires hanging

[@GalinaFurchik]

They don't care. It cost them up to $100, quality NOT a goal here. They just want your money.

[@Ledo_400]

Do they last longer than the vland tail lights?

[@pcmicro3944]

The Vland/MostPlus/Handor brands all come from the same manufacturer in China that uses polymethyl methacrylate (PMMA), which is also known as Acrylic. This is a cheap material that will crack after being exposed to sunlight for several months. Raxiom uses polycarbonate which is many times stronger, and it's the same material that the OEM Dodge taillights are made from.

[@PitchPerfectKill]

@@pcmicro3944 that’s good to know. I have the VLand ones and they still look great after a year and a half, but if that ever starts to happen I’ll be getting these.

[@iclappedurgirl4335]

@@PitchPerfectKill how they holding

[@spaldingmcintosh]

@@pcmicro3944these are sourced from China too, spoke with American Muscle customer service when mine started splitting and cracking after a year

[@x7hunter]

So do these lights only work on the 09-14 challengers?

[@AmericanMuscleDodge]

Yep! These lights are specifically for 08-14 model Challengers. -Zach

[@danielrey7464]

Anyone else have fitment problems with it?

[@GreysonErvin]

Yes, there’s a big gap on the top how do I fix it?

[@jesusdominguez7565]

@@GreysonErvin did you fix ?

[@UnpredictableStuntN]

Why didn’t you show them how the brake lights work once you engage the brake pedal… these look like vland taillights smh

[@pcmicro3944]

@Steven Price no they are not. Vland/MostPlus/Handor are all from the same manufacturer, but the Raxiom are much higher quality made of the same type of plastic that Dodge uses for their taillights (polycarbonate), so unlike the other brands it won't start cracking after a while.

[@equalizer2233]

@@pcmicro3944 What is your relationship to Raxiom? Are u affiliated with the company?

[@jatol1980]

Nice installationvideo except for the shitty electrical tools.. no pride here

[@spaldingmcintosh]

They only look good for a little while. Bought these brake lights less than two years ago, they are covered in deep cracks and all the black paint has peeled. American Muscle does not replace these, because they are sourced from China. For $600+ this is unacceptable. This is a cool concept that was poorly executed. Learn from me. Do not let the good looks fool you, they will be falling apart within a year.

[@xavierjohnson4046]

Been trying to buy these, when will they be in stock again?? @americanmuscle

[@AmericanMuscleDodge]

We'll hopefully have these back in a couple months! -Zach

[@user-vg6nd6sw1g]

600 dollars piece of trash didnt even last a year chip cracks looks so bad and it happens right after the warrenty expires please for the love of god dont buy these things

[@spaldingmcintosh]

Yep. Bought these brake lights less than two years ago, they are covered in deep cracks and all the black paint has peeled. American Muscle does not replace these, because they are sourced from China. For $600+ this is unacceptable. This is a cool concept that was poorly executed. Learn from me. Do not let the good looks fool you, they will be falling apart within a year.