Nakamichi MR-2 Calibration step-by-step

Nakamichi MR-2 Calibration step-by-step guide:
Step1. Speed Adjustment - 1:53
Step2. Meter Level Calibration - 3:01
Step3. MPX filter Adjustment - 6:25
Step4. Azimuth Adjustment - 9:21
Step5. Playback Level Calibration - 11:09
Step6. Playback Frequency Response Adjustment - 13.28
Step7. Bias Frequency Adjustment - 21:09
Step8. Record Amplifier Equalization Adjustment - 25:03
Step9. Bias Trap Adjustment - 28:29
Step10. Record Level Calibration - 32:27
#audio #vintage #cassette #retro

[@InsideOutElectronics]

Nakamichi MR-2 Calibration step-by-step guide: Step1. Speed Adjustment - 1:53 Step2. Meter Level Calibration - 3:01 Step3. MPX filter Adjustment - 6:25 Step4. Azimuth Adjustment - 9:21 Step5. Playback Level Calibration - 11:09 Step6. Playback Frequency Response Adjustment - 13.28 Step7. Bias Frequency Adjustment - 21:09 Step8. Record Amplifier Equalization Adjustment - 25:03 Step9. Bias Trap Adjustment - 28:29 Step10. Record Level Calibration - 32:27 #audio #vintage #cassette #retro

[@mike311271]

hello and good morning, i was wondering if u can point me in the right direction with regards to a NAKAMICHI BX-125E, missing audio in one channel, it plays/rw/ff/pause/dolby all work, leds are level and flashing on the 2 channels, headphones one channel, i have tried cleaning contacts tape record and play selector, and demag the heads and cleaned heads, but still nothing, i have gone round the inside just to look for bad or burnt parts, nothing, any ideas would be much appreshated , thanks

[@InsideOutElectronics]

Going to release a video which might be an answer to your question ! This Saturday ! :D

[@narutonish]

It could be azimuth or the relay it's bad or dirty.