AMP Research POWERSTEP [XTREME] - Silverado Full Installation & Review -

[@miguelgonzo34]

yes just installed mine last week. wife and the kids love them. I called 10 places to get a quote for install got anywhere from 200 lowest to 450 highest. I decided to do it myself after watching yt videos and so glad i did.

[@dustyevans2339]

4wheel part’s just quoted me $794

[@anan7s294]

Where do u put the jack after installing these? If someone accidentally places the lift under these steps, and lifts the vehicles up for service will it hold the body weight and still function normally?

[@krakadile]

I have so much respect for you man. Your videos are so detailed oriented, entertaining, dead on point, long but simple and informational. Excellent job. I got the same steps installed on my wife's truck, same as yours, and they are such a deal breaker for her. They are expensive but in my opinion, the price is fair if not right for the durability, finish, ergonomic design, product quantity, easy installation, the phenomenal look and the functionality is outstanding. By the way, I found easier for me to partially install the step bar on the brackets first and then the brackets or hinges to the frame of the truck, but I guess for you was easier but lifting the truck up, thing that I didn't do. Thank you so much for your videos.

[@ChrisDIYerOklahoma]

AWESOME! I have those exact same ones on my 2021 GMC Sierra AT4 (6.2L). They have been awesome. Everything you said about the installation is correct. I also installed them myself. The stock AT4 steps are heavy with a sharp/rough textured finish...and really didn't do anything except rip the skin off my legs (while in shorts) exiting the truck. These steps are pricey, but 100% worth every penny. Nice work

[@matthewlegg9686]

Man, great addition to the truck. They are gorgeous. I have fixed Step bars, (2017 Silverado SCA Apex Edition)... the only thing I like about the fixed bars? No door dings! The height of the truck places those bars in the perfect position so that other doors hit the bar instead of the truck. I have personally witnessed it on two separate occasions. And I snickered both times.

[@Salyers-Family-2004]

I’ve installed the Rough Country E Boards on a 2018 Wrangler and a 2024 Gladiator. Each door has a wired sensor that fixes on the vehicle body and a magnet on the door itself to activate the switch when the door opens and closes. It’s a tough job. I’d like this better to plug into the OBD2 port with no sensor at each door. Good installation video. **Light upgrade TIP: The Rough Country boards had the small lights also but I upgraded both of my installs with a 72” StreetGlow LED white strip light. Very nice upgrade.

[@gmoney9068]

I've had the AMP Power Steps on my 2017 Silverado for the past 4 or 5 years and I absolutely love them! I have no mechanical skills whatsoever so I had to break out the credit card to have them installed but it was worth every penny! Thank you for sharing!

[@samrachaliii4244]

I'm having these (hopefully these are the ones the dealership ordered for me) installed on my 2009 Chevy Silverado LS this week. I have the same need for steps now. For my Father is very much older now and not as agile as he once was for getting up into my truck. Thanks for the video. I do like the fact that you are meticulous about everything looking as if it was put in from the factory. I pray the installer who does the work on my truck has that same mindset. I am disappointed that there is drilling involved in the installation. Crap! Aloha from Aloha, Oregon. Google it if you have never heard of it.

[@colbym771]

I installed mine about a month ago and I love them!!!! I had a problem with wiring I had one side both motors were fighting each other.. all motors were installed correctly so I ended up rewiring behind the motor harness to get correct operation of the motor.

[@stevedemarest276]

This is a great video, full of good advice. However, be aware that starting with the 2022 year models, GM trucks require an additional installation step to splice directly into the the truck's wiring. Amp's OBD II connector is also required, but two wires (in addition to the two purple) have been added to the wiring harness and connect up under the dash. It's not super complex but it is additional hassle and warranty impacts on the GM side are unknown.

[@johnnya.quevedo2552]

Been waiting for the upload 🔥

[@aaronkimmel5341]

Just purchased these steps for my truck. I love watching your videos and the mods you do to the Silverado. I am from Ewa Beach Hawaii and moved to Ohio 25 years ago! Aloha and Mahalo for the inspiration for the truck!

[@LonestarHawaiian]

Right on, Aaron! We miss home. We stayed Ewa for 5 years (West Loch). Thanks for watching. Aloha

[@golfbravowhiskey8669]

Nice. My factory set worked about three months. here in this Texas blackland in constant mud in water they finally gave up. Dealer replaced them twice. Third time I took a saws all and cut them off right at the motor. Most of the time in the back would go down in the front wouldn’t because of the heavy mud. By the way your electric motors sound pretty loud. Although it may be just because you’re in your garage and it’s like an echo chamber. Maybe outside they’re not as noisy.

[@pj9241]

Get this man to 100k

[@LonestarHawaiian]

🤙🏽🤙🏽

[@grizleeone1]

I use insulated copper wire (like the type you use in your house) to run wires through the firewall and other areas. It works really well!

[@613atv2]

Man I love the videos you do on your truck, they are great mods and you are not going above and beyond where the truck would kinda suck for daily driving. You got the perfect rig. Keep up the good work man! I am currently in high school but my goal for the future is to buy myself a 2017 white on white Chevy Silverado z71, then I’d want a 2015 camaro ss aswell.

[@LonestarHawaiian]

🤙🏽🤙🏽 Thanks for watching!

[@Chepo1500]

@@LonestarHawaiian better than the country running boards ??

[@laigocustoms4965]

i added these to my 2014 RAM 1500 6 inch lift about 6 months ago and absolutely love them , they are practically invisible when retracted on my black on Black , i will definitely be adding a set to my 2020 trail boss when i lift it , right now the boss has fixed running boards

[@Lucidkevin1]

The extreme fits on the 1500? I have a 2017 ram 1500 and on the website it says only 2500/3500 ram

[@jimellisGF_Exotics]

Yessss! Just bought mine for the new 2023 silverado 2500 HD! Can't wait to get them on!

[@suprsquirrel2215]

My 22 GMC Sierra Denali with a 6" lift came with AMP Powersteps and we love them. Nice to have the steps when you need them, but tucked away when you don't.

[@Mondo_0ne]

Best cinematics on KZbin...

[@LonestarHawaiian]

Mahalo!

[@seananderson9635]

Bro I literally found your channel like a week ago because I am in the market for a trail boss refresh and am now hooked on your channel keep it up

[@kencarrington5706]

Yes they are a real ease of access to my Silverado. Good luck getting parts and getting them to return your e-mails. Customer service is the pitts. My auto lift retract circuit board went out. After several attempts to get a replacement or answer, i finally took a butter fly switch and wired it in. I'd much rather have it in auto mode, but for now , until i find a new board. i'll just do it manually.

[@jprz1925]

Worth the price!! Just got a 2020 Silverado! Found you while looking for mods on a Silverado!! Definitely watching your videos since it looks like you actually take the time to choose the right parts for your truck! Keep it up man!

[@clayjensen9644]

Love mine after 2 years up in northern Wisconsin the extremes are a must with the ice and snow build up

[@koryliedtke1631]

I have them on my lifted 2016 GMC 3500HD and absolutely love them!!

[@Dbrockjohnson]

wow the fact that chevy already has pre threaded holes sold me! Im getting this same system asap! Great video bro, Trailboss is the best truck in my view from factory.

[@papagoose1979]

I installed mine on my Boss about a month ago. You did alot better on the holes. I butchered two of my holes because the drill decided to do its own thing. Love mine though.

[@oscarsandoval4328]

This video came in clutch!!! Thanks! Keep the videos coming 🔥🔥

[@LonestarHawaiian]

Thank you!

[@toddlu3365]

I say the factory auto extending are the best. The extend feature to go all the way to the back wheel allowing you to step into the bed make it the most practical in my opinion.

[@markbutcher2734]

Agree - this set shown looks like an add on and not in a good way.

[@frankwalker9078]

Amp is way better than factory. They drop down to the right height to allow easy access to cab. Factory sits too high up. Plus plenty of rocker panel protection.

[@Filiku]

The LED’s in the same color as the accents would be nice. This is what I need to put on my truck. Thanks for sharing

[@ericnorthup6464]

I work at the gm full size suv plant and my old job was running board install, 450+ truck a shift. These look much better than oem

[@martinquintana5837]

Again Chad awesome modification for the TrailBoss, never a dull moment on any of your videos. Again GM needs you to work for them as an engineer/designer cause you do awesome work on all your modification's. Anyways stay safe out there and have a blessed day. Aloha from Kansas

[@LonestarHawaiian]

Mahalo! Thanks for watching the videos 🤙🏽

[@chadnahoolewa588]

AMP running boards are the best hands down!

[@TheDadNerd]

These look awesome 👌 and as an added benefit I’ve been trying to wire up my antenna and power for my ham radio and didn’t know about that gromet under the driver floor mat. You just saved me so much frustration of fishing wires through the tiny firewall port. Looks like you just drilled out the plastic like cap they have in the existing hole. Thanks for the awesome videos keep them coming!

[@JebClarke902]

I installed a set of these on my '21 GMC AT4. They're ok. So far they have been reliable, but my 2 biggest gripes are: 1. They don't tuck up neatly and closely underneath the truck. There is about a 1.5" gap between the steps and the bottom of the truck (when they are retracted). 2. They don't extend back to the bed. My wife and my daughter love them, but I'm not 100% sure I would buy them again.

[@kennywilliams1299]

I installed the power ramps on my 2015 Silverado and they are awesome

[@mac9916]

You have to get the override switch for them...trust me, game changer.

[@MNKiwi]

Kia Ora Bro !!!! - Former Texas Kiwi now in Minnesota!!! - go the AB's!!! Love the vids - Keep up the good work brother - 2019 Lt Trailboss here too in Black too

[@LonestarHawaiian]

Right on cuzzie! 🤙🏽🤙🏽

[@BigDFPV]

I just ordered a 2022 Trail Boss today, should be here in a 4-6 months. I can't wait to copy all your mods lol 👍

[@JoseJimenez-xz5yv]

Thanks for the video installing my amp kit tomorrow and this definitely helped.....I'm ready...... great video

[@haynkokanut]

Howzit brah! Glad to have found your vid! buggas look good! bout to install on my 2000 excursion! Aloha

[@AzraelIgnis]

Just bought a 2020 Ram 1500 Laramie last night. This will be my next mod. The truck has a 4” lift already. It’s a challenge

[@nevarez323]

Got these steps for my 2018 and my dads 2021 and there awesome!

[@matabenioni466]

Damn! Love the energy you bring to your videos. Can't wait to own my Silverado. Your funny. Love it

[@lbj808]

Yes first mod I added!!..my wife told me “you can lift the truck as long as the AMO steps are there”😆😂.. Aloha bro🤙🏽

[@LonestarHawaiian]

They are so good. Should have done it a long time ago!

[@jasonpurcell4270]

Great project. Amp Research steps were the first upgrade for my 2015 Silverado. I am sure you will enjoy them too.

[@96txtoastiii65]

Zip tie the Amp research harness by the battery! Mine got brittle and the main controller fell out the bottom of the pickup 🙄 now I have a big step until replaced 😂

[@DaRespect88]

Bro the car wash had me dead ☠️.. I knew there was reasons I liked you and subbed almost right away

[@billaxberg6103]

I have the power running boards on my truck and I love them. Very clean look. I like the lights on your running boards. Very sharp.

[@adammorton2062]

We just got a 2019 trail boss and love it it's the dark gray color and have been differently been paying attention to your modes my first one I want is to keep a v8 a v8 you do great on your videos and have a cute family can't wait to see your dad's truck painted

[@user-ch7kb7pe5r]

Just got a set for my lifted trail boss. Worth the money, and now the wife can get in and out of the truck with ease.

[@LonestarHawaiian]

...and my old butt as well after trying to play sports again 😂

[@Ryansrangereport]

I just picked some up for my 22 AT4 HD. I have it leveled on 35s and the family pretty much has to crawl into it. Not anymore!

[@Big_Mike72]

Thanks for a great video. You make it look easy. Also I love your wheel/tire combo.

[@kevindom5059]

I just ordered this running boards 😍

[@TutaWookyDrummer]

Man if only I could have a sit down with you and pick your brain about the wiring and whole anatomy of the truck. I love the passion you show when working on your truck. I don't know if you've done one or not but are you able to do a full Silverado Trailboss 101 in terms of engine bay and wiring or perhaps recommend a few videos from some of your peers whom you deem credible? Keep the videos coming! My Trailboss 2 door is going to be in for a hell of a make over because of you! 😂

[@dallhoc2895]

What Chocolate? Seriously those are really nice. Worth the money with the build quality and if the motors hold up!

[@bryangonzalez8942]

Truck looks fire brother🔥

[@LonestarHawaiian]

Appreciate it🤙🏽

[@Williams_x12x]

Love your videos sir! Tempted to put on my identical BOSS but cant pull the trigger due to snow and ice of Minnesota. 💜🖤

[@mochaleui7814]

As long as the wife’s approve Hawaiian is all Cherry. The Trail Boss is next level. Mahalo braddah 🤙🏽🤙🏽

[@LonestarHawaiian]

Mahalos🤙🏽

[@nickdavis2806]

This is awesome. Love your videos

[@guyalexander2099]

I got the Amp power steps 1st thing I got for the Silverado . The wife & the kids like that easier to get in . I like the sleek look too !!

[@clayjensen9644]

They also make a step called the xl wich I believe they come down a additional 3 inches. I bet the kids really like them for getting in the truck. enjoy 😉🤙

[@sandmangti7040]

You are my vote for USA Top Gear. Now we need two more.

[@LonestarHawaiian]

👆🏽let’s go!

[@PureGarage]

Thanks for the video! About to get mine today!

[@brysonified]

Slowly getting to having twin trucks. FYI, need to go to dealer and have the AMP steps added to ECU to avoid electronic issues.

[@Breezy.Anderson]

When the Og came out 😱❤️

[@LonestarHawaiian]

LOTS coming later this year for the OG... just waiting for the parts to be built!

[@Blind_Reviews]

I love how rugged plastic is too! Not really.. Love the idea.. but for 2k.. I'd expect more metal..

[@jeffkuipers1030]

just bought a newer ford F-150 XLT so now it's time to put on powersteps on it

[@gmanthejeepman]

I wonder if you could get the lights in a brilliant white to match the rest of the LEDs and the puddle lights. The cool blue just really clashes IMO. It’s the only thing that’s prevented me from buying them

[@mikebigguy7053]

Hi I been watching your videos for a long time now and love them. I have a 2021 trail boss and put the exact steps on mine last summer. I love them. But one problem I have is where I get in and out daily the paint has rubbed off. So watch for that.

[@keithdickson8364]

I put the Go Rinos on my TB yesterday. Didn’t want to spend that much money. They are nice though.

[@LegacyIndustrial1]

Great video! Definitely getting these units!

[@ashleymalone5396]

They're expensive.. Until you price the Rock Slide Engineering step I previously put on my Gladiator. 😶 I'll be happy to buy these for half the money for my new AT4.

[@craig1474]

I need something like these as they are but lower than the stock ones. I have health issues and my dad is old, soon enough he’ll have this truck. Too bad they didn’t make them long enough to reach into the box, no company seems to realize that would be a huge selling point.

[@rolandlopez892]

Awesome job I run amp on my Silverado as well. Love them

[@LonestarHawaiian]

Right on!

[@anthonywalls3281]

Trust me you will love them I love mine 👍👍👍😎

[@smokin_keto]

New steps Look good! 🤙🏽

[@jasonhauser4507]

"I just spared you a bunch of boring footage" Yeah that was specifically what I was interested in seeing.

[@mattmay1643]

ditch the amp lights and get some recon strip lights, the color is better(6k) and its one continuous light. Not to mention the color will match the led lights everywhere else.

[@JohnD0129]

Which ones did you get ?

[@mattmay1643]

@@JohnD0129 last time I had gotten recon 60" strip lights

[@paulythapitbull9658]

Thats been the biggest thing stopping me from buying, the ugly blue lights

[@avidwaterfowler7522]

You need to get a Milwaukee cordless ratchet. It would speed up your wrenching, for sure.

[@LonestarHawaiian]

I've been eyeing it...

[@mattwoo860]

Nice video! Love all the content! How are they holding up so far? Any concerns with snow/ice during the winter? Looking to install these as well

[@jedd1004]

I've mounted a couple of sets on the new Silverado, I found the hardest part drilling through the stupid pinch weld! 🤣

[@Overpar73]

I love my AMP steps also, very nice!

[@LonestarHawaiian]

Right on!

[@douggarrett5288]

This is the best truck channel I've found. I have a dark red LTZ on the way, how visible are they on a truck that isn't black ?

[@darcydomingo221]

I have them on a white silverado lt and you can hardly notice them

[@LonestarHawaiian]

Because they tuck up against the frame which is coated black they ghost in pretty well regardless of the color of truck

[@ryanb3701]

Those are cool. i have the factory retractables on my high country and i like them but i wish GM did these kind of steps inside with a chrome strip on them. it makes the truck look like it sits up higher and tucks them out of way.

[@osheenhaghnazarian1073]

Good job. Nice review

[@jakesmith8366]

I have always wanted these for my truck, but could never swing the price. They look great tho

[@gunsnsails]

Very cool! I wanted the factory version on my Rebel but they were recalled for some crazy defect of some sort. Eh...maybe next truck.

[@user-ru9up6mt5g]

I don’t know if I was seeing things wrong but it looks like you had a body mount missing on your truck . I enjoy the videos, I have a 2021 black trailboss.

[@LonestarHawaiian]

I thought the same thing when I bought the truck. They are all like that. They use this frame across multiple trucks and bodies so they are used for other size/trims.

[@user-ru9up6mt5g]

@@LonestarHawaiian After I sent the message to you, I looked under my truck and saw the exact same thing. 🤣🤣🤣

[@anan7s294]

Where do u put the jack after installing these? If someone accidentally places the lift under these steps, and lifts the vehicles up for service will it hold the body weight and still function normally?

[@obs4life228]

Love my amp running boards

[@davidfarrell7915]

Was drilling for lights a pain? Didn’t look like it but I installed these last year on my 21 and I went through 8 carbide bits for 1 hole, even took it to 2 different body shops. No they used their best drill bit with no luck. Ended up taking it to a mechanics shop, heard air tool going nuts for about 15 min and it’s was done. All shops said it was tough metal.

[@LonestarHawaiian]

haha 100% fact. I went through 4 drill bits and a few curse words. Also reassuring that the metal underneath me is super solid.

[@dominicbell9377]

I have them on my 2019 Chevy Badlander and I love the them. But GM told me that they won’t fix the port it’s plugged in because it’s a aftermarket part even though the company that put it on (Tuscany Motors) has a contract with they still refuse to fix it under warranty. Have you heard anything different?

[@IbbySS.]

Ok i guess i know what my next upgrade to my truck is 🤣

[@FlyEaglesFly19111]

This looks like the same way for my 2018. Now my new 2022 RST i will see soon.

[@markgray2931]

Lonestar, how are the LED lights holding up? Are they still as bright as when new and still sticking to the paint good?? At first I was looking at rough country but I do not like the magnetic contacts or they do t work at all. So I guess rheumatologist plyg and play for quite a bit kote money is the way to go.

[@LonestarHawaiian]

The lights on the steps still work great and have had no issue remaining adhered. The AMP steps remain one of my favorite upgrades on the truck hands down.

[@markgray2931]

I know my spelling wasn’t that terrible when I hit send lol. Thanks for the reply back, i think I’m about to pull the trigger with the Amp brand, the RC magnetic operation in the door jambs just worries me. No contact, no work- and they say, oh just readjust the magnets, but then how well will they stick again-no thank you. Hey, love your videos and keep up the great tutorials for all of us to watch and learn. Preciate it!!

[@brandonjones952]

I really want these for my 08 Silverado but I'm running a amf disabler so I wonder if I could hard wire the wires instead of using the OBD2 port?

[@mitchellgee8887]

Another great video. Hey where did you get your gym floor mats?

[@LonestarHawaiian]

Tractor Supply! They are the best,. and actually meant for horse trailers. They work amazing.

[@steventrudeau4955]

As always...tastefull but here a question...do they work whit winter condition in Canada?

[@LonestarHawaiian]

The Xtreme version has the two additional motors to help the steps deploy with ice buildup. Obviously living in Texas I won't be able to verify... 😅

[@steventrudeau4955]

@@LonestarHawaiian Oh good to knows i will do some researchs about it! Thanks. You were looking for a Zr2 some weeks ago...are you still on the project ?

[@afasnow18]

Do your steps make noise when driving like squeaking or creaking? Do they make a clicking noise when they are retracted? I install these myself this weekend and when mine close they make a clucking sound and when I’m driving, I notice a creaking sound. Not sure if you had the same issue?

[@killerbuellxb12]

These look great for that truck... However, is there an adjustment for delay in "Tucking"? Granted, I havent used these kinds of boards but I just wanted to ask.