Amped Review - PolarStar Micro Regulator

[@Vanalos]

Really like where HPA is going.

[@JerryA89]

Would this be appropriate with a 68/4500 Ninja tank attached with the new Ninja Flex Regulator? If so, at what output pressure should be set at to avoid damaging the Micro regulator? Or would I not need this regulator if I have the flex regulator on? Thanks.

[@De_forresto]

I have an F2, can I use this in conjunction with an empire 68ci/4500psi tank? I see everyone using ninja, or ASG. Just want to make sure I don’t damage anything

[@AmpedAirsoft]

Sure can! You can utilize any normal or SLP style paintball tank on the Micro Regulator. Please let us know if you have any other questions. Thanks! Kurtis

[@roberttomes6085]

just got an F2 Love it

[@willmoir8347]

What tank/Regulator do you run? I just purchased and F2 and don’t know what to get

[@poseidonairsoft5783]

So it would fit on any tank..

[@STR8ROX]

Will this regulator work well with a TM breacher HPA tapped? Because they use alot of air 😬 but i like the size of the MR.

[@AmpedAirsoft]

Sure will! This regulator is a very high flow regulator and will not have any refresh issues. -Kurtis

[@PartNinja]

Sadly a lot of fields are requiring hard locks on regulators not just a zip tie covering the hole. Wish they had a sliding hard lock like their other regulator or the wolverine on tank reg.

[@AmpedAirsoft]

Good news! We offer 3D printed Hard locks that work on most regulators. They are currently coming out with one that will fit the Micro, although it's not currently out yet.

[@PartNinja]

@@AmpedAirsoft Sure that works. The point being an integrated one is much more convenient.

[@AmpedAirsoft]

@@PartNinja For sure!

[@sneakynut9107]

Its a 3/32 Akey, 2.5 Akey didnt work for me

[@AmpedAirsoft]

Hmmm I wonder if they updated. We will have to come out with a new video. This one is quite old. Thanks for the info!

[@kenokrooairsoft]

Redline SFR or MR? Which one performs better, if you don't care about the size?

[@AmpedAirsoft]

Both perform very well. The MR is newer to the market though. The SFR has been around for a while and had it's predecessor the Firebase on the market much longer before that. If you want tried and true, I would say the SFR at this current moment in time at least until the MR has been out for a while longer. Hope this helps!

[@paulkeyser6943]

Redline SFR mini vs Polarstar Mr now?

[@texanbroomer7888]

What size tank and regulator would guys recommend to run an a&k saw with an wolverine inferno gen 2

[@opairsoft8100]

texan broomer for tank at least a 90/4500 for a lmg. Or if you can get a duel tank setup

[@AmpedAirsoft]

Pretty much any of our regulators that we offer will work. With a Saw, I would say nothing less than a 68/4500, but you can go with a 90/4500 or a dual 3000 psi setup. Or even a dual 90 setup if you want to really go crazy. It all depends on how you play and how much you shoot during a game and whether you want to swap out the tank or not when it's empty.

[@jacedininger3259]

Can you put this on a 4500 psi tank?

[@AmpedAirsoft]

Jace Dininger as in a tank that outputs 4500 psi? Or as in a tank that holds 4500 psi but is a standard paintball tank that outputs between 300-800 psi? If the first, no. If its just a normal 4500 carbine fiber tank with standard output then yes. That is what its designed for. To our knowledge there is no regulator setup to accept 4500 psi output tanks often refered to as PCP tanks. Those are meant to fill high power air rifles or refill other tanks off of them. Hope this helps!

[@jacedininger3259]

Amped Airsoft. Yes I meant like a carbon fiber tank. I wasn’t sure if this was a “slp” type regulator or not. Thanks!

[@AmpedAirsoft]

@@jacedininger3259 Gotcha. This is a standard type regulator that will work on both SLP and Standard Tanks. Hope you had a great Christmas! -Kurtis

[@miauo123]

Is it possible to use this with a co2 adapter?

[@AmpedAirsoft]

Yup! Here is a link to the ones you would need to use to not worry about CO2 Liquid: ampedairsoft.com/polarstar-co2-inserts-for-ugs-and-cgs-gas-stock-hpa-air-stock/ This will fit on the Micro Reg or MRS reg

[@chrisweizenecker8128]

Do you guys know when these will be restocked

[@AmpedAirsoft]

Should be this week! They just redid these and released a GEN 2 version. Perhaps they will even arrive tomorrow. ;)

[@chrisweizenecker8128]

Amped Airsoft thanks : )

[@AmpedAirsoft]

@@chrisweizenecker8128 No problemo!

[@Dannyboy32669]

When is the F3 coming out?

[@AmpedAirsoft]

That is currently not a thing yet haha. ;) However I'm sure there will be one in the future. The F1 was made a couple years ago and the F2 was recently released, so... I would say expect something like that a couple years from now. Stay tuned!

[@pierat7]

I need this with the new 'Amped Custom - Universal Dual Tank Adapter'! Also great vid! #makeampedgreatagain

[@nightmarehd8171]

I know this video is old but I really need help choosing a regulator. I have a polarstar F1 and a ninja can I use the MR for that?

[@nightmarehd8171]

Tank*

[@SDBoards55]

How's the refresh rate?

[@AmpedAirsoft]

Very good! It's a high performance regulator and has as good of refresh rate as other high end regs out there.

[@Daviot22]

I am new to HPA, I was looking at getting this reg with a fiber tank, is there one you would recommend? I was going to run a Polarstar gen 3 in a LVOA (I hope you guys restock soon) although the FPS out of the Red nozzle might be more heat than my field will allow.

[@AmpedAirsoft]

Hi there! The Micro Reg with Carbon Fiber tank is a great combo. It's actually one of our most popular regulators at the moment. We have Black LVOAs and Fusion Engines in stock. Is there a different color other than Black that you are looking for? We can special order in other colors, but are thinking about not carrying non-black colors due to them not being very popular. With the FPS, when you use a red nozzle with a red poppet like ours come, you can typical be within field limits unless it's cqb. By running your regulator lower, it allows you to save a ton of air, have great performance, and be within field limits. Please feel free to email us at [e-mail] if you would like a color other than black and we can get you all setup and ordered in asap! Links to current LVOAs in stock: ampedairsoft.com/amped-custom-hpa-rifle-krytac-war-sport-lvoa-s-black/ ampedairsoft.com/amped-custom-hpa-rifle-krytac-war-sport-lvoa-c-black/ Thanks! Kurtis

[@Daviot22]

@@AmpedAirsoft Thank you for the reply. I was looking at the Foilage Green LVOA-S when I purchase the rifle. I was going to get the Regulator and Tank out of the way first (Here in the next week or so) and then purchase the gun hopefully by the end of March. With the Red Poppet can I get the FPS down to or below 400 FPS with .20g BBs? or 310 FPS with .32g BBs

[@AmpedAirsoft]

@@Daviot22 Ok sweet! Yes, please shoot us an email and we can get that rolling for you. I can place one on our next order which will be in approx 1 week. Very cool about the reg and tank. We have those in stock and ready to go. That should not be a problem. If you happen to have a tight bore barrel and your FPS is super high, then you can utilize poppet shims (ampedairsoft.com/amped-custom-fusion-engine-poppet-shims-pack-of-4/) to reduce your over all fps and increase your efficiency even more. You can also go even more efficient and bring the fps down lower if you run a gold poppet with shims as well. Lots and lots of options to make what you want happen if the standard setup is too high. Hope this helps!

[@siliconesword1798]

This dude be lookin like BAZZI!!!!!!!