AN fitting-braided hose basics

[@crazylife6319]

i miss these kinds of videos man. short, sweet, to the point and no bullshit. everything now adays is jus clout chasing. i love ya wisdom and humbleness man. keep doin you

[@offroad9730]

Very helpful bud. Good job.

[@ronnieboucherthecrystalcraftsm]

very helpful i have AN fittings and 20 foot of s/s shielded hose ! thank you for your time !

[@-alto]

You, sir, are a national treasure. This was one of the best tutorials ever.

[@colsonstephen8104]

you all prolly dont give a damn but does any of you know of a trick to get back into an instagram account? I was dumb forgot my account password. I love any help you can give me!

[@anderskristian6220]

@Colson Stephen instablaster ;)

[@MrBillDaBear]

Outstanding! These -10AN oil cooler fittings were intimidating at first but I just put together my first fitting by following along with your steps One thing to mention - make sure you clean up the inside of the hose if cutting with a grinder

[@BioExtract]

Amazing tutorial, was confused on arrival and now feel confident trying this myself. Thank you so much

[@huntermdo6985]

WOW, you did an EXCELLENT job of explaining the very important details!! Thank you. I really like the way you talk, I would love to have a beer w ya!

[@joesneve500]

Very practical and easy to understand. Glad to have found this video...good job and thanks

[@Her4Him269]

Took a little while to get through the video but it was worth the wait, thank you your explanation helped.

[@01kx125man]

Mate your a bloody legend!!! Was trying to get the fitting on for 2 hours watched your video and took me 2 minutes to put it on!! Thank you so much 👍

[@gregschultz2029]

Been a long time since I fought braided hose & AN fittings , Your ideas will make my job much easier, Thank You for your video ,Nice Job !!!

[@edgbostonnorth7167]

Thank you... enjoyed watching your down to earth explanation.

[@constantbusch6372]

From the UK. That was excellent. Very clear and good detail. Nice one.

[@xzivr4894]

Just wanted to say thanks for this. Never done these and was having a hell of a time with it. Watched your video twice and just finished all my hose ends with no more problems.

[@alliecatcustoms5808]

XZIVR that’s awesome news, glad I can help!!

[@USMC-Sniper-0137]

Awesome job. I can see ya'll know what your doing there!! I'm now ready to go out and tackle my AN fittin's!!!

[@Screamingz1]

Great demonstration on AN fitting and line assembly, very helpful. And the cleanest damn crescent wrench I ever did see! Had to run over it with a buffer wheel! Lol

[@arthill2310]

I love this sorta "no nonsense" type of video.

[@johnnybomb08]

It's true! Not all hero wears capes and this man is definitely a hero.

[@GavatronX9]

I'm getting ready to put on 10 an fittings and lines on my 91 chevy. Thanks for the vid!

[@danielbailey541]

dude amazing video. honestly i never used the an fitting wrenches, i just used an adjustable wrench. only thing i did different was i wrapped the fitting with a paper towel before i put the adjustable wrench on it to prevent from scratching up the finish of the fittings.

[@hessiejames4896]

Great video. Thanks so much! I'm using the tight SUMMIT fittings that are a pain in the butt to get over the hose. Did exactly what you suggested but put a steel hose camp over the tape and cut along that. Worked like a charm. Been trying for an hour before I watched your video. Will sooth my bloody fingers now w/ some beers ;-)

[@AllieCatCustoms]

haha, happy to help!!!

[@MrMac6150]

Thanks for the video. I'm getting ready to put a braided fuel line on my 72 ford F250.

[@sidduke3172]

I want to to build high pressure fluid lines using AN hose and fittings. Your video helps me to understand how and why each step is necessary. Thank you very much for taking your time to help me learn ! Sid Duke

[@billthompson9595]

Great information and tutorial. Thank You very much!

[@6spd85notch]

Nice job. I’m preparing for when I do mine next week. Good video man. 👍🏻

[@onthepin830]

Thanks for the vid...you are definitely great with thses fittings...great instructions and video...thanks again brother..

[@ZevGriffin-s5u]

Outstanding video! Thank you!

[@nunya.b]

I learned a lot, thanks for making this tutorial.

[@lorddragoono]

Great video man. Nice and relaxing. Now I'm not intimidated by these fittings at all.

[@gnatatrobina]

Great job! I need to do this for my fuel line on my 1970 GTX. Thanks.

[@niallpower109]

Very clear and informative 👍

[@AllieCatCustoms]

Thanks for watching! 😎🚜💨

[@rx7cl]

Nicely done sir 👌... always wondered how.. now I know for life.subscribed as well.. great job..

[@calvindevore5325]

Good video. Thanks. Hail State!!!

[@jenbill]

Having never used AN fittings until a few weeks ago I was pleasantly surprised that everything you showed is exactly what I did, was wondering if I went about it the right way didn’t leak so figured must of did something right.

[@pbaylis1]

Thanks for this. I know what to do now. Cheers!

[@tobe4141]

I was going to use steel, but I gotitnow, thanks

[@AllieCatCustoms]

Glad I could help! 😎🚜💨

[@carpenterdesign]

Great video

[@hondaslave-kd6hi]

Thank you feller.

[@richardharris492]

A crescent wrench is a DIRECTIONAL tool, you are using it backwards, fyi less chance of slippage. Same with open end wrench

[@Sleepy56chevy]

Folks who are impressed by this video don't know the difference between a metric Crescent wrench and a standard Cresent wrench.....

[@jameshisself9324]

I can not recommend enough that you don't even mess with rubber hose, just build them with PTFE and once complete they will never fail due to hose breakdown. Harder to assemble yes, but worth it in the long run.

[@JosephPPreston]

Saved my ass. Thanks man

[@morgan4xl]

First I was impressed by this guys instructions making it look easy, second I was impressed by the fact that he wasn't wearing those pussy surgical gloves like 99% of other modern day video makers wear for some unknown reason. When I first started working on cars if anyone would have put a pair of surgical gloves on, he would have been taken out behind the garage and rightfully roughed up.

[@ArturoCortez]

Good info!

[@rifkyramadhan6889]

How to cut corrugated inner steel and braided steel ??

[@twwap294]

Jeg's calls the tool an "aluminum vise jaw". Use that in your search

[@AllieCatCustoms]

Thanks! Thanks for watching!

[@mtnfordman]

good video

[@cutlasscrazy6081]

I have a new saying to add to my mechanic vocabulary, "Tighter than a dicks hat." Love the videos. Great help.

[@nickonickster1]

Where do you get the fittings? At a good price

[@southernindianacustomcycle3187]

You can cut it faster with a hacksaw

[@Denveradoo]

Thank you

[@SupraJoel]

You dont need to put lubricant on it. put hose in vice, start with fitting then use a socket to screw it on.

[@demerclopez2622]

good info

[@jadielrodriguez6593]

Love you hahaha

[@scottphillips1210]

Do -4AN teflon fittings.-8an & -10 my wife can do.short and sweet to much bs.

[@coachgeo]

I call bull shiat.. try this with 4an line... fraying is IMPOSSIBLE to prevent./navigate around. Have found ONLY soultion is to force the SS sleeve down ... put fitting on as shown her but JUST on the inner core.. Once your fitting installed.. Tape the SSteel splay of material right at bottom edge of the fitting... then cut off the SS strands VERY CARFULLY. so not to damage the inner core and so not to totalyl FUBAR's the nice fitting.. .. but you will and you will make it look like shit.. then from other end before installing that side..... put a 3/4 shrink rap on it slide it up to your fitting and cover your uggly shiat hack job at base of fitting. On 4an at least, this is a freaking waste of money unless you get it with fittings installed already. Hoping like hell my 6an SSteel line assembly is going to go better. Got like 8 hoses (16 ends) to make compered with just two end on my the 4an. One 4an end took 1.5hours till figured out the work around. Its a return line; so at least it wont suck in air (diesel engine application). did about 16 ends with 10an fittings on nylon strand braid without issue. (remote oil filter/cooler/thermostat) Or I just suck at SSteel braided.. could be that too lol

[@coachgeo]

6an- steel braided.. nope.... complete fail..... the electrical tape is a NO GO. It is to flexible. Answer was SUPERGLUE. then a non stretch tape once dry and then cut with a very fine cut tool with as few mm width as you can muster. . BUT... below 6an.... even this fails... even superglueing the braids.. one layer of stiff tape and superglue that prior to cutting- FAIL city... .. Braids at end of hose still flair ever so tiny amount.. but enough to make it IMPOSSIBLE to install the nut.

[@raymondj8768]

21 min. hahahaha

[@danielbailey541]

dude amazing video. honestly i never used the an fitting wrenches, i just used an adjustable wrench. only thing i did different was i wrapped the fitting with a paper towel before i put the adjustable wrench on it to prevent from scratching up the finish of the fittings.

[@jackbrennan8476]

Good video