Analyze oil burning hot air furnace with Testo 310

[@vunknownuser1419]

First step to get correct reading - turn on 310 outside(from manual) The first step in testing ambient CO would be the zeroing phase in clean ambient air before entering a home or mechanical room area. A service technician would start outdoors by turning on the combustion analyzer. The analyzer’s pump draws in air for a few seconds to clear the probe hose and the sensors. Doing this outdoors enables you to then walk into the mechanical room or house with the analyzer running checking for safe levels of carbon monoxide. Also, do you have video once you down fire it to 1.00 ? Just want to see results. Thanks I just received mine 310 today.

[@kevin9c1]

Here is the down firing video: kzbin.info/www/bejne/qKWlhoutbJ16mbc

[@JuhaErkkila]

Interesting to see what you did with the burner and of course using that combustion analyzer. Hopefully I get one instrument too because I ordered one just a moment ago ;)

[@ComfyAF]

That analyzer took me some getting used to.. the up down to scroll had me goin 😅

[@junTo46]

Hello, thank you for the video, do you know how to change the cells of the Testo 310. Disassembly is probably done by removing the large rubber casing which surrounds the device. Do you have your own process?

[@ComfyAF]

That 600+ over fire is pretty intense =\

[@pabloescobar7595]

How much was your combustion test kit

[@zeroheat5787]

310 is about $800-$900.

[@ajacevedo6223]

$700