Anchorage in masonry and cracked concrete with injection mortar fischer FIS V

Discover more advantages: www.fischer-in...
The fischer injection mortar FIS V is the high-performance attachment for all building materials. The special adhesive anchor is not only suitable for filling drillholes - the fischer concrete anchor is universally applicable in masonry and cracked concrete - in every season. It ensures significantly more safety than ordinary mortar anchors at the highest loads and ensures reliable anchoring in masonry and cracked concrete.
Applications:
● Steel structures
● Timber constructions
● Railing
● Facades
● Stairs
● Steel consoles
● Machines
● Masts
● Awnings
● Canopies
● Doors
● Consoles
● Pipelines
● Grids
● Satellite antennas
Your benefits at a glance:
● The high-performance mortars FIS V / FIS V High Speed ​​have a large number of system approvals, such as: in cracked concrete, masonry and special applications. Due to that the FIS V is the universal injection mortar family with guaranteed safety for almost every application.
● FIS V High Speed ​​has a much shorter curing time and therefore ensures rapid work progress even at low temperatures. Thanks to the refined formula, the mortar can be used all year long at extreme winter temperatures of -15 ° C up to summer temperatures of + 20 ° C.
● The extensive range of accessories is optimally matched to the FIS V injection mortar family, it increases the great flexibility of the system and thus enables a wide range of applications.
Would you like to learn more about the fischer group of companies and its products?
Visit our Website: www.fischer-in...
Belong to our facebook Fans: / fischergroup
Follow us on Instagram: / fischer.group
Are we already connected on Twitter? / fischer_global
Have you already discovered our fischer blog? www.fischer.co...

[@user-cl3gz9ey1w]

What did you call aircrete drill bit joint Making funnel hole ???

[@zerommprojects]

Very Nice product but curing time is so fast usually have to use within 2-3 minutes else after epoxy and hardener mixing it heats up and attachment nozzle solidifies so basically u will need more nozzles thus increasing your wastage

[@komrad40]

What if the room temperature is 30 deg. Celsius? How much time will it take to dry?

[@MWAKUAE]

Perfect

[@guru253]

This is sone good shit