In October 2022 I removed the injectors from my Suzuki GV (with the Renault 1.9 engine) and having unscrewed a couple of the needle ends so as to clean the five holes, I was perplexed as to how to re-assemble the parts and was unaware that the tip is separate from the holder because it was so gummed up with carbon. I drove to three diesel specialists asking how to reassemble them and was told “You’ll have to part exchange them and pay £165 GBP for each.” I came home feeling very depressed and then found the answer in this video. Thanks for saving me a lot of cash.
@ranat5526 Жыл бұрын
Just thinking that a Renault engine is inside a Suzuki is depressing enough!!
@AM101GT4 жыл бұрын
Thank you for taking the time to show this in detail. Very helpful!
@colinaglae26055 жыл бұрын
Thank you Anderson. Its a great video on cleaning diesel injectors. Opening of the injectors was awesome !!
@Lipjam6 жыл бұрын
Excellent Video. I enjoyed watching. Your Macro shots were impressive and you've got a engaging style. Watched till the end and then said awh when it was over :)
@hipstarchild4 жыл бұрын
Awesome video. I'm going to give all 4 injectors an overhaul now after 117,000 miles on the clock. Thanks for sharing !!
@Magmon4 жыл бұрын
Brilliant! Thank you! That will be my next big job on my Rodeo TD , 2.8, 96 made great sense and can be duplicated thanks to your diligence! 👍😃✅
@petersherrouse335 жыл бұрын
I appreciate your video. I've cleaned VW and other injectors with an home style denture ultrasonic cleaner - works great! . Water and soap is all I find it needs. A few seconds will knock the big stuff off. I usually hit them with about 30 minutes or so. LUBE THEM RIGHT AFTER REMOVAL (or they will micro rust). In reassembly I flush them liberally with clean diesel fuel or cheap spray can penetrating oil. I don't recommend using a wire on the holes as it can mess up the spray pattern . The pintle pin should float in the bore with no friction,. - Be careful not to let it fall out ! Keep every thing VERY clean and flush with diesel while assembling.
@nickpritchard713011 ай бұрын
Great vid. Been quoted $2400 to replace 4 injectors on a 2012 Audi A3 1.6 Tdi. No one in West Oz offers a cleaning service. This is a great vid showing how to save money. Well Done.. !!
@rcsl114 жыл бұрын
Great video started cleaning my injectors and thought best find a video yours was fantastic and we'll shown Thank you 👍
@zachamy44448 жыл бұрын
I have used that product and put it in ultrasonic cleaning machine. I had great results in ten minutes .
@antypanag17 жыл бұрын
awesome video mate u sure got the subject thanks that made this vid for us ... so helpfull be well u and ur family !!
@edups33072 жыл бұрын
I love these diy videos. I dared to touch one of my common rail injectors on the electrical side because it was leaking from there. I didn't know where to put the small ball that was on top of the actuator and had to send it to the shop. They fixed it up but it's still leaking. This video gives me a lot of confidence, will definitely do this sometime.
@neilburns61185 жыл бұрын
THAT was absolutely Brilliant!!!! My only negative feedback is that on another video it stated to make sure your working area is 'Meticulously' clean, and they stressed how important that is. Almost clean room clean for working on injectors. I have the injectors you showed so this is perfect for me. Thank you. Again, Excellent video.
@tomsurrey22527 ай бұрын
I was thinking that, too BUT... great video! I never thought of cleaning them but now... I will!
@Itisinthehand6 жыл бұрын
Appreciate your research. Good vid. I'll do mine. Having just paid £503.00 for two and now told I need another two. I'll service them myself. Thank you.
@Alexander_l3223 жыл бұрын
How did you get on doing it yourself??
@philotton94452 жыл бұрын
Just given me the inspiration to tackle my diesel injectors on my tddi 1.8 ford connect. THANK YOU 🤞
@coachandreas52142 жыл бұрын
Excellent video! I am just about to do this with my 5 common rail injectors on Volvo d5 . This made my day. Methodical and explained everything with ease. Thanks!
@pkikon69836 жыл бұрын
Thank you so much - very well explained
@jamesaverty80173 жыл бұрын
Thanks for taking the time to do the video - very helpful
@amritnarah10086 жыл бұрын
Sir ji bohut bohut sukriya mera ek 5 hp desel machin hain abi injector karab hukor betra hain. Hum abi apka video ku dekor bohut kusi.
@mrbrownkayumanggiusa17487 жыл бұрын
Very good video. Thank you for sharing.
@VeryMuchBlessed8 жыл бұрын
Very good info. Clear and concise. Thanks much.
@katiedreissigacker60105 жыл бұрын
excellent attention to detail, great video, Thankyou.
@sidykane76504 жыл бұрын
THANK YOU, VERY CLEAR, LEARNED A LOT FROM YOU, GOD BLESS!
@gidsbaltv86603 жыл бұрын
I'm gonna save this video, so I can clean the fuel injector of my future YAMADA 22hp diesel engine, for my fishing boat soon. Philippines Thanks for sharing.
@louisamotsepe282810 ай бұрын
I'm going to take my Mersedes to som1 to clean the Injectors. I was scared before I'm now relieved and hope they going to be fine. This video saved me a lot of money. Tnx.
@jasonga Жыл бұрын
Yay a good video, I’ve taken them totally apart before and they been fine, doing my PD injectors soon….. my local shop want £125 each to do them!! You can even buy new tips on line for them!!
@bollaert9942 жыл бұрын
Thank you Adorian for for sharing this ,explaining very clear .
@christopherpermall5866 жыл бұрын
thanks so much demonstration is very helpful and interesting
@tinkerpertao83834 жыл бұрын
Finally, I found a video that clearly shows how to disassemble, clean, and assemble a fuel injector (diesel injector). For the lack of parts name knowledge I would just say there are a two part nut base (one part to connect to the fuel port: the half part which houses the device with two circular alignment tab pins and the other half is used to house the injector needle), and a needle that atomized the fuel. I would hazard a guess that when the diesel fuel is under pressure it comes out through the needle as a vapor (atomized). The needle houses the pin, meaning there is a pin inside the needle, right? So the pin inside the needle controls the fuel delivery by moving up to plug the holes and moving down to let fuel pass. Right? Excellent video. 33 foot pound to tighten the nut of this certain diesel fuel injector using a TORQUE WRENCH. Wonderful, thank you so much for your time and sharing it with us.
@vivaldivivaldi4232 жыл бұрын
The best video and correct and explained seen so far thank you the problem with the injectors has been solved
@bad5150dab3 жыл бұрын
AWESOME! Very informative video. If anybody knows what torch tip cleaners are I highly recommend a set of them because there is different size wires in there and it is the perfect carbator tool. Not only will clean carbs but any thing mechanical that has small holes that's got to be cleaned. Can buy from any wielding supply store. 😁
@davidelliott5843 Жыл бұрын
You can pick up carburettor jet cleaning kits for very little cost on eBay. But you must use a solvent because any seeds of carbon will move back down and clog the spray tip all over again.
@redionxhengo21846 жыл бұрын
Nice, you help't my to create the idea how to clean my injector and you save my a lot of mony. Thnx bro
@ChernobieffPiano5 жыл бұрын
I enjoyed the video. BTW you can buy Brass music wire of different sizes. I'm surprised you don't use gloves, pretty dangerous chemicals there.
@MrChris76ize4 жыл бұрын
This is a very interesting video, very instructive. Thanks a lot, will help a lot
@sepimate5643 жыл бұрын
Thank you I cleaned now my injectors and injectors knocking noise is gone and good performance great.....man
@Alexander_l3223 жыл бұрын
Was you car ticking when you accelerate or what?
@TheSubpremeState7 жыл бұрын
Great info here. Thanks for putting this up.
@jasonga Жыл бұрын
I done similar to you but I also put them into ultrasonic cleaner, I couldn’t believe the dirt that came off!!
@WarthogARJ6 жыл бұрын
Thanks for this. Very helpful.
@CalTreeEquip6 жыл бұрын
Thanks, this was very useful. You would be wise to keeps those solvents off your skin. They actually soak right through your skin and can have long range effects to you nervous system. The thinner stuff goes right through your gloves as well so I usually hold whatever I'm cleaning with long pliers. Just a tip. Thanks for making this video.
@zeez90533 жыл бұрын
Great tip I can imagine they could cause auto immune diseases
@davidelliott5843 Жыл бұрын
Most solvents are potentially dangerous but the really effective (but really nasty) stuff eg 111 trichloroethane and carbon tetrachloride are no longer available. However biodiesel is safe and a very effective solvent. There are many recipes on www. You can make a litre in a soda bottle. Just mix, shake and leave to settle.
@brianlittleforest631 Жыл бұрын
They're using the red can of brake cleaner - the chlorinated stuff. I doubt their concerned with their health too much.
@oisin1980 Жыл бұрын
Best video on KZbin for cleaning injectors
@tonyreyes99693 жыл бұрын
Super clean job. Just wondering if he did test the injectors for correct opening pressure, spray pattern test, and leak test.
@superbreastman5 жыл бұрын
Very helpful. Thank you so much. Ciao!
@lazystar19696 жыл бұрын
excellent video! Thanks for the lesson!
@miwka404 жыл бұрын
Excellent help. I have saved some money !
@TylerWhieler6 жыл бұрын
thnx mate good video, i just wonder how was your driving experience after cleaning all nozzels? and how many miles did you drive before u cleaned the nozzels ?
@zirakomar7235 жыл бұрын
Thanks for your posting video this is excellent video
@gregcy894 жыл бұрын
Thats amazing! I wonder if its the same for all diesel injectors...
@nancysmith94873 жыл бұрын
Yous did very good job explaining how to clean up and reuse injectors... any chance of polishing pin so it's a little harder for carbon to still too, also allowing it to move in and out more freely... Thanks for sharing
@funtoyscollector13444 жыл бұрын
easy to understand explanation from your video..thank you
@pastytit3 жыл бұрын
Nice work sir. Thanks for the informative video.
@raymondkarlsen99953 жыл бұрын
Great video! Any advice on dealing with leaky injectors?
@angargoy71812 жыл бұрын
*Very good for the video I have been able to learn something new in relation to the injectors of my car.*
@jimzocco63655 жыл бұрын
thank you, nice video, very helpful.
@nicovanzyl36314 жыл бұрын
Enjoyed the video. very good advice
@saijuakshaya19833 жыл бұрын
Important valuable information thanku sir👍👍👍👍 really appreciate
@oisin19802 жыл бұрын
Wow. My volvo penta 2001t just wont start. I've tried everything. Flushing fuel system' filters everything. Im confirmed enough to try this now. What's the worst than can happen at this stage. Thank you so so much
@andrelandeiro38427 жыл бұрын
Thanks a lot for this "tutorial" it helped me saving 50€ euros. God bless you ;)
@keithandrew307911 ай бұрын
Great video thanks for sharing cheers from keith in New Zealand 😊
@juancaleya40056 жыл бұрын
THANK YOU TO TEACH US !!!!! FROM SPAIN.....
@jagdishchouahan25204 жыл бұрын
What a great informative video 😀
@joeyjones66382 жыл бұрын
Brilliant idea with the wire to clean the holes 👍👍👍👍
@stephenkelly5642 Жыл бұрын
A very clear informative video.
@-Gargantua4 жыл бұрын
That was a really good educational video
@voiceinwilderness74 жыл бұрын
Good Video. Learned a lot.
@Tahimate3 жыл бұрын
I enjoy watching the cleaning process. I will do that to my nozzles.
@karbinunit3 жыл бұрын
Awesome!! Learned a lot :)
@Mercy19763 жыл бұрын
awesome video mate
@djtopvibe89304 жыл бұрын
Thanks I need to clean mine very useful to know
@gtxtx32 жыл бұрын
absolutely excellent video, I got a lot of good info from it, thanks :)
@enteresan385 жыл бұрын
bunu yaptikdan sonra problem duzeldimi? kendi aracimizin enjokterlerini boyle temizlesek problem olmaz demi. kirlendigi zaman. bilgisayara baglatip kod felan girmeye gerek varmi? bazilari oyle diyorda. Tesekurler
@rickjaf6 жыл бұрын
awesome video. thank you so much!
@TheMaxAcceleration4 жыл бұрын
WHAT A COOL VIDEO!!! Thank you SO much for this! I took my 20-year-old Mercedes to an "Injector Specialist" 3 years ago, who cleaned all 6 injectors for 400 Euros, that's about 442 US Dollars. Now, after watching your video 3 times, I'll do it myself. Although I'm a "machinist technician" I never dealt with injectors, I always thought it's a something very-very sensible thing, After watching your video, I will do it this (like you in your video) at the weekend myself, for sure, THANK YOU SO MUCH! Over here in Hungary, we don't have that cleaner, but I bought it on Amazon for 35 US Dollars incl. shipping, it will arrive tomorrow :-) I'm sooooo excited. Thank you once again!!! That "specialist" told me a fairytale about injectors.... "there are 2 very small balls inside it when you disassemble it, you may damage it, that's at least 1200 bucks for 6 injectors, etc..." Andeson, you're great, thanks a lot for this VERY DETAILED video, I can't thank you enough!!! I always get comments on my channel, that I speak and talk too much in detail, but you're my man, the truth is always in the small little details... What's the worse thing? I have to buy new injectors. But I don't care. You just empowered me :-) Now I don't even care if it gets broken, I'll try to do the same you did. If it gets broken I'll buy a new set, but it is definitely worth a try. Really Anderson, THANK YOU!!!!!!! (TheMaxAcceleratrion)
@alfredocomparte27022 жыл бұрын
Hello brotherx did you ever do it? how did it go?
@mohammedalrahel2463 жыл бұрын
I saw your video,, I feel like can do same thing 😅,, I did (clean injectors) when I start the engine never working 😅,, recover with mechanic take €420 to retast and fix the injectors 😂 Thanks 👍
@oliwiacda_hejka54195 жыл бұрын
Ale się na szukałem tego filmu super film.
@luksiorja41153 жыл бұрын
Put new videos and difference injectors. Good for someone needs clean for self. Big + for you.guys.
@dredrotten5 жыл бұрын
The proper way to do it is to drop the injectors into an Ultrasonic bath of diesel and detergent for an hour or two (overnight for the really bad ones), give them a rinse and you should be ready to go.
@propatria42582 жыл бұрын
do i need to disassemble injector when dropping it in bath?
@reinhardtrippmacher8776 Жыл бұрын
I was waiting for that comment. In general yes it is the way to open them but a steel wire in the holes and a steel wire brush are a big no no.... Yes and you have to dismantle them when cleaning with a ultra sonic cleaner. As well use nitrile gloves and a lubricant when touching them. Sweaty fingers can course corrosion!
@longhuynh52492 жыл бұрын
Thank-you so much, very helpful.
@zeez90533 жыл бұрын
Great video well repaired it should be better that new 🤘🇬🇧
@Hocchobiet3 жыл бұрын
Well the are very helpful! I owning the 2006 dogde sprinter 3500. I only put a little over 1550 miles, this van are my life. Unfortunately first 3 three years it treated me like king but I wasn't take good care of it. These 2 years U very struggle and very frustrated with the van . No how to get it back normal performance. Well before I took all 5 fuel injectors out and clean them but not same as your's the video your shares. Now it doesn't at all . Please do you any solution that I can get on the road?
@carlluscombe40112 ай бұрын
Good video thanks for taking time to make
@cineesefuprimul32805 жыл бұрын
What dinomo metric you use?? Please tall me, thank!
@roc315396 жыл бұрын
Very helpful. Thanks
@RC-Heli8353 жыл бұрын
Cool! I like fixing things if at all possible, if they have any life left in them. Right now Im fixing a siezed up air compressor off a wheel barrow compressor. The thing had sat for years tucked away in the shop and wasn't used because a hole had rusted into the bottom of one of the tanks. I fixed the hole with acetylene welding and cleaned out the fuel system to get the engine running again. The twin cylinder compressor ran very strong and would do 160 psi with ease so I liked having it on my work trailer. It would actually run a 1 inch tire gun just enough to take a truck tire off. The compressor was low on oil apparently which Id never thought to check and one day while running it on a 16 degree Farenheit day for just a few minutes before the compressor sadly locked up and came to a screeching halt. It has set for 3 years now taken apart and I got the idea that I would file the gaulding off the crank and recondition the rods with a brake hone. And what do you know? I have it back together now with smooth working rods and crank. I liked the compressor especially because I got it off the shelf and gave it life again. I gave it back its purpose. I made a place for it on my trailer. And I'm fixing to do it again.😎🙂
@shadowwolfXD973 жыл бұрын
I know its 5 months later but why the hell would you do all that and nit change the oil.......
@duncanwalker73803 жыл бұрын
Very good... Thank you extremely helpful
@DavySwift4 жыл бұрын
Nice one 👍 Thanks for sharing.
@YourWizBlog4 жыл бұрын
thank you for this video.
@MrGarcon986 жыл бұрын
try a acetelyne torch tip cleaner will help you to clean those holes and also ACETONE is a cleaner i used for ever cleaning ac's etc . try it
@user-ms7qi4vn8y7 жыл бұрын
thank you vary vary mach from iraq
@dieselhead242 жыл бұрын
Very good video. Can you do this with piezo injectors?
@m998hmmwv72 жыл бұрын
That was awesome! Thank you
@timoreinart958 ай бұрын
where are you located? really awesome video and DIY capture.
@jameslatimer14324 жыл бұрын
Fab vid bro very helpfull
@TMar067 жыл бұрын
Great video!! I have a 2008 Sprinter van and luckily the nozzles (all 8 ports) atomized with no blockage. I do have another question. There is a washer/spacer inside the barrel if I pull off the piece u said don't take off (mine fell and it came off) along with another cylinder piece. Do you know which side of the washer goes in first?
@AndersonERockefeller7 жыл бұрын
TMar06 Well... when I took an injector apart the first time all and all the parts fell out and I'm like...now what??? so what I did is took a second injector apart slowly piece by piece this way I can put the first injector the same like the one that I took apart. just don't mix the parts from one injector to another cause it will be off calibrated.
@TMar067 жыл бұрын
Anderson E Rockefeller Thanks for the advice! :-) I was hoping to get by without pulling another injector. 😂😂😂
@azsiger90044 жыл бұрын
Hi! After this disassembling/ cleaning /rebuilding, does the car or the injector need any coding? Or just put back in the car and it will work fine? Thanks!
@stanciubogdan64324 жыл бұрын
Hi. No code needed. These are mechanical governed injectors,not electronical.
@kevinkhaleel90105 жыл бұрын
Amazing... will try this over the weekend.. Did the engine make a hissing noise prior to cleaning
@ondrejbudhabudz96985 жыл бұрын
it work?
@dopiaza20063 жыл бұрын
Great video. Just for info, you shouldn't continue past the first click on the torque wrench.