Andis Slimline Pro D8 Trimmer Battery Replacement Tutorial (ASMR..ish)

[@belencabezas7445]

I loved your video, can you explain the process please! Thanks

[@scottsoriero9827]

The standard OEM battery is a Lithium Ion Cylindrical Cell 14500 800mAh, 3.7V 2.96Wh. With the battery specs you will then need to measure the length and width of the battery and simply google this battery type and look for one with the same measurements and specs. DO NOT exceed specs as heat can develop with a charger too small or too large. These battery types are known for getting hot during charging and use and could ignite. This mainly applies to the voltage. The amps are just the storage of energy and will have no affect or have issues as the battery charge will just last longer. Good luck and nice job to Big Dave.

[@tonygough8762]

Great video you need to do more video like this .

[@amit10-i8k]

Where can I find... This battery

[@robwhiff3411]

Were did you get the battery ? I been looking

[@crossdup]

Great video! What was the red paper or tape you placed in for it to work?

[@BigDaveEnergy]

I used some pieces of heat shrink tubing, but even a little piece of electrical tape would do the same thing. Thats just what I had on hand!

[@MichaelFeddiman]

Wat kind of 🔋 is that

[@marclemar]

@@BigDaveEnergy I’m not clear on how that tape or shrink made the difference

[@Calderm4]

@@marclemarsame

[@INCREDIBLENANO]

What torque screw number is it?

[@sergiogarzon8371]

Me sirvió muchas gracias

[@erinlagos2806]

Should’ve done the voice over

[@pathyal489]

💖 'promo sm'