Andis t liner how to fix when teeth don't move

T liner has power but teeth do not move. After i adjusted the spring my t liner started to work right away.
Interesting to note is that it cuts even better than when i got it out the box.
Please like, subscribe and share and comment below with your results.

[@AlvanC1]

This video is exactly what I needed, I’ve been trying to figure out this issue for years. You solved 3 years worth of headache in a 6 minute video!

[@bunfiyah689]

Glad to help and glad it works

[@Jeralddoerr]

5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.

[@bunfiyah689]

😂😂 glad it worked cuz

[@tarimills1849]

I been looking rough for about a month. I was 5 minutes away from buying a new pair. Saved me 60 bucks!! Much appreciated

[@Jeralddoerr]

60 bucks? You get yours off eBay... It's two years now so maybe it's inflation.. Mine where 100+

[@AaronMoreno-e6y]

@@Jeralddoerrcrazy, you could’ve got a nice cordless trimmer for 100

[@Jeralddoerr]

@user-bq2xu3mc1r Yep... I own corded and the same version but wireless. Love them.

[@alecia6868]

Dude you’re a lifesaver man. I was about to give up on this thing 😭

[@_curry.chicken]

nbs!!!

[@Skoonieg88]

Just got the Andis Stylist Combo & the T-Outliner blade wasn't moving out the box thanks for the vid just what I needed!

[@54SHOW]

Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!

[@willierodgers7530]

This worked!! My liner's are working perfectly now. Thanks!

[@getzknowledge]

Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!

[@bunfiyah689]

Thanks a lot brother. I appreciate the love. God bless.

[@CrownedJulz]

Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue

[@NightmareNotebook]

Had mines for over 10years and I was just about to buy a new one! Thanks bro

[@MrVizziato23]

Thanks to this video it saved me a headache because I was about to throw this buzzer out the window lol

[@pacmanh22]

Dude thank you!!!! I had this issue for almost year after replacing my blade. Thanks for sharing, my andis T liner works great now !

[@JNo-sk5mz]

Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇

[@bunfiyah689]

No worries. Glad it worked!

[@davisiheanacho]

Thank you!!! You are the realist for giving all of us these helpful tools.

[@thaddeusjuniorable]

Thank you, just fixed mines and they are working even better

[@jayotto100]

Thank you so much. Was just about to buy another one until I stumbled on this video. It really works.

[@boblansonfig3972]

Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good

[@bunfiyah689]

Yes, this is accurate. I had to do that as well. Good tip to point out.

[@Jeralddoerr]

I think that's when you want to adjust the silver tip outside with the flat head screws.

[@km025]

🖤

[@noahno]

Skip to 3:10 you’ll thank me later. But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼‍♂️idiot

[@Untinydancer]

Thanks for the timestamped link!!!!!!!!!!!!!!!!!!!

[@Jeralddoerr]

Lol... These are the best Clippers ever...

[@LEdoubleX]

My man, you just saved my some money. Fixed mine on first try. Funny enough it was the screws by the switch that had to be loosened. Thanks!!

[@jelaniritter4862]

Works like a charm thank you sir. You saved me $75

[@boogieman6661]

This works. Such a quick and easy fix. I only had my timers for about a year.

[@MrChulo07]

thank you was about to buy a new one. i try this and it works better than before

[@georgehazel8175]

Exactly what was going on with mines, the switch was bad, I bypassed the switch and I'm good, better that buying a new pair ....👌🏾👍🏾

[@TheWeeklyWeekes]

great help, thanks for the direction, I just finished up working on mine and my dads!

[@bunfiyah689]

No problem. Like and subscribe:)

[@meandmycrazyworld8705]

Thnks I was able to fix my husbands clippers!!!!! Saved mad money

[@dlou93]

Man your the best! I was this close to buying a new razor ‼️💯👌🏾

[@MedHead]

Amazing tutorial, worked like a charm!

[@bunfiyah689]

Glad it worked. Like and subscribe!

[@teddybeartoe]

A lifesaver man thank you.

[@ButterInChicago]

THAAAAAAANKKKKKKK YOUUUUUUU!!!!! So grateful that you took the time to make this and share it. 💛✊🏽✊🏽✊🏽

[@JC-ig4xy]

Great video. Just to add, I would try to line up the white ball just below the middle point. If it's too low that means its too tight.

[@jovannib619]

Hell yeah thanks man this is what was wrong with mine , cuts so good and sharp now thanks .

[@Untinydancer]

This video showed me perfectly how to fix my Andis!

[@The.entreprenr]

Thank you bro!!! This just saved me another 40 from a haircut #godblessyou

[@dwaynecurtis3696]

works perfectly you just saved me some money

[@bunfiyah689]

No worries. Like and subscribe fam.

[@brianvicente692]

This worked 100% you saved my weekend thanks a million. Thumbs up

[@bunfiyah689]

No worries. Like and subscribe.

[@TillNextTimes]

Dis a Game changer!! My Second pair was ready toss them like the first one back cutting like new

[@brand0nbandz]

Needed this vid, man! Came thru for me in the clutch. Much appreciated!

[@Melodicluis]

You saved me $70. Thanks for sharing this

[@solomonthelyricist]

Thank you very helpful, just fixed mine. You saved me a $1000 Jamaican dollars.

[@bunfiyah689]

Bless up fam

[@d3arb0rns]

Sala mercy

[@SaksShopper]

Thankyou this video saved me from going to buy a new pair of clippers

[@PIR8IL]

Thank you bro! I was going to send mine off to get repaired but this worked perfectly.

[@BabyCookles]

Fixed. You the man, thanks my dude.

[@Priceabate]

I was about to trash this clipper because it would not cut...now it's cutting again better than before 3 years old!!!

[@zkel1132]

Thanks bro… worked perfectly for me…

[@MaChaudeLowery]

Saved me $60-70. Thank you❗️

[@brwdnico]

Tanks so much bro like it’s working better than before.

[@Awsomedailyfacts]

This video solved my issue thanks alot.

[@berhanuomega1270]

Much appreciated, sir! Thank you!!!

[@LionHeartzx]

This helped out a lot. Thank you

[@LuisGuerrero-cy7yv]

Thank you explained everything 10/10

[@lennyzelfine7850]

Very helpful!! Thanks very much!

[@bosshadowrock]

Totally worked! Thanks! Saved me $70...

[@chinito20fam]

Some say that the screw on the bottom to adjust it . But mine are like yours.. the very bottom part to adjust the blade from being even.. not to the very left or the very right .. and some people say it's the blades themselves.. coming from someone who modded their andis.. and it's been a problem since I first got it.. at first I thought it was the stainless steel blades .. upgraded and got a babyless blade on it.. compared to these blades .. and well I just want them to last for years.... And reason I got it for home cuts... Cut like butter the first few times . But still overheat...

[@jordanpatton1866]

Thank you for this video, it worked for me!!

[@beelvanbuurenful]

Helped me fix mine, thanks bro!

[@donbenain9316]

Thanks going to try this in the morning. Mine went days ago.

[@robertminor3460]

Than you , it's back working now

[@krank2kold]

Man than you so much. I was about to run out and buy a new one. It sounded like the motor was going out.

[@bunfiyah689]

No worries. Like and subscribe. Glad it worked.

[@elruffles]

Exactly what I was looking for . Thanks for your video and much obliged.

[@pemuwa]

Thanks for the video. Saved me from buying a new one.

[@survivalmethod8224]

Good looking bro thanks a million!

[@thatmanDarryl]

Thank u , saved me some dollars🙏

[@spiroskafouros]

I love hearing cp24 in the background 😂

[@bunfiyah689]

😂😂😂

[@MrDangelo1313]

Saved me in 2022 💯

[@chrismcdaniel6516]

Appreciate that. Works like a charm now.

[@zarifhawladar5253]

Works like wonder thank you man!

[@MisterMannerisms]

It worked! Thanks.

[@travissapp2266]

Thank you for this!

[@twoglocksonmyhip]

Thank you 🙏 it works now ,I had left mines in the truck and I believe from the heat the screw inside got super tight .loosened it up a bit and it works better than before

[@tayshawnallen654]

Very helpful my brotha

[@justinmunford2164]

Great video! I was ready to toss mine

[@bunfiyah689]

Glad it worked!

[@MrDaboss154]

Blessings brother! Much thanks for this 🙏🏾

[@bunfiyah689]

My pleasure!

[@craigcameron2598]

Awesome video. Thanks for the help!

[@daje97]

Plug out each time you go back inside the clipper. Or you Will get SHOCKED! -Barber

[@elnene6077]

Thanks brother all set 🙏🙏

[@saintthrillah]

This video just saved my clippers

[@christian7o231]

Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.

[@jkortiz17]

Wow! Thank you Sir. I am returning att the new one I bought yesterday. Lifesaver

[@showtime7979]

Huge thanks man 👍🏽

[@Reelcargo]

Great video! Only thing is it coulda been 3 min. Thx 🙏🏽

[@Brainhoneywalker]

Bingo! It works again. I only used it once. Is there a better one? You really shouldn’t have to do this.

[@Sean2Small]

great vid!! works wonders.

[@soILLitsADVISED]

Godsend. Thank you 🙏🏾

[@reggiemckinney1426]

Thanks bro! Working even better.

[@comptonnatives3502]

Perfect thanks!

[@nuggetschicken8961]

This hack works!

[@ZavieM]

Thanks a mill!

[@thisthatpack5084]

Saved my ass appreciate it man 🤙🏾

[@bunfiyah689]

No doubt fam

[@jorgecjenkins]

Thanks much!!!

[@reallywill5494]

Thank you!!

[@petersonjorge967]

Thank you so much

[@cohven2384]

2022 this vid helped out

[@dalvinmorris9582]

You the goat save me a 100 today

[@kevinbainesjr1193]

Def worked for me! Thanks

[@AuthenticKenneth]

Thanks 💯

[@hamburglerkosh2049]

Bless you 🙏

[@scottcobra710]

Works!

[@Trapgawwd23]

Thank you

[@thedapperrebel5275]

Omg thank you!!!!

[@ddubtv4954]

Helpful video thanks alot

[@bunfiyah689]

Glad it helped