XXL copter human manned flight / drone - Manntragender XXL Copter MADTOX

DJI WOOKONG "M" Stabilisator
Engine 120100/60kv / 25.000W / mass 3,9 kg
www.ebay.de/itm/153775459970
ESC 400 Ampere 3-22s
www.ebay.de/itm/153641379644
Batteries each engine 1x7s and 1x8s 22.000mah
www.ebay.de/itm/153657451566
Helix propeller 1,20 x 6 zoll
www.ebay.de/itm/153640859719

[@whatswilldoing7293]

FINALLY someone puts the props where they should be ABOVE the pilot. Nice work.

[@BenState]

enjoy the noise and down drafts

[@whatswilldoing7293]

@@BenState indeed! much more enjoyable than being chopped up if you fall over

[@codetech5598]

@@BenState There seems to be clear plastic sheets in the corners to shield drafts.

[@BenState]

@@whatswilldoing7293 nothing the hovercraft industry hasn't solved

[@BenState]

@@codetech5598 no good for noise

[@maskman4821]

very steady and stable !!!

[@pedrooliveira-ku8gu]

I really liked this project...

[@piggypiggypig1746]

Have you seen the Chinese drone video with CGI passenger? lol. You clearly have confidence in your equipment and it works as described. Well done.

[@carel20081]

Nice to give the technical data!

[@andreasjanssen8095]

You can write me to My Email [e-mail]

[@jpkrucker]

AWESOME work thanks

[@indorailfans2532]

best drone car i see, please make more videos

[@vincentkossi3316]

Wow it is so wonderful

[@alexsaini]

Excellent sir 👍👍👍👍

[@Patriot3]

Love to see more

[@MRA735]

क्या बात है कमाल कर दिया

[@TuanAnhPham]

I really like this

[@henriquemoritz]

Great work! What propellers size you used? (1,2 x 6 would be =47" diameter?)

[@mrmakinist]

amazing

[@Justwantahover]

Nice and stable. With all that weight it must be a nightmare getting it to fly stable.

[@omlohar7578]

Weight balance is very nice.

[@ti7adahab799]

Hi sir surly it's great work...can I ask you something about it sir please 🙏..what the type of Motors that you used it and ...time of fly..and can I programming it by arduino as the small normal drone.. Thanks sir and I hope that I'm not annoying you 🙂

[@hembonero1547]

if PDB (power distribution board) and FC (FLIGHT CONTROLLER) for this type of motor like this where do you buy it? thanks

[@2005Eugen]

Yes, i Need this

[@aliptera]

The most effective mode of flying is wing-borne, exploiting the high lift per drag ratio of the wings, so these "personal aircraft" eventually will need to transition to a wing borne flight. Fighting gravity all the time with 4 smallish propellers is aerodynamically very inefficient. I got that an quad-copter is easy to develop and build, but nothing beats the hovering efficiency of a single rotor helicopter if hovering is your goal. High aerodynamic efficiency is the most important especially to electric aircraft, to alleviate the low specific energy of current battery systems.

[@codetech5598]

Well, people have nothing against wings as far as efficiency goes. The problem is they make an aircraft bulky and require a runway. Now you can use small wings and compensate by increased speed (like the Cri-Cri) but then the high speed and twin engines require different licensing, etc. Are you familiar with Robert Carr's "Internal Wing Aircraft"? rexresearch.com/carrcoan/carrcoan.htm

[@aliptera]

@@codetech5598 I've seen it before, Carr's claims are a lot of crap, the proof is that his wing is applied only to toys. Most such a closed structure wing can do is to improve Oswald efficiency number, but it can be done better with other methods, e.g. as increasing aspect ratio. Small, efficient wings and transition from VTOL, now I like what you're talking. This opens another can of worms, the rotor size. To be hover efficient, a VTOL aircraft needs large rotors - having low disk loading, otherwise the power demand is very high. However, large rotors are detrimental to wing borne cruise performance, a conundrum of all VTOL concepts, since the creation of the first VTOL aircraft. This was recognized early by NASA and other corporations, a representative study in the field is "Dynamic Model Wind Tunnel Tests of a Variable-Diameter, Telescoping-Blade Rotor System (TRAC Rotor), Evan A. Fradenburgh, Robert J Murrill, Edmond F Kiely" link: apps.dtic.mil/dtic/tr/fulltext/u2/771037.pdf A variable telescoping blade is hard to engineer, proved not feasible for tilt-rotors as V22 and AW609, maybe it works for smaller, personal aircraft. I think a better approach is to use a wing specially designed to generate lift in hover, the conventional wing is dead weight in hover anyway, to augment the rotor hovering lift as in these aircraft concepts: kzbin.info/www/bejne/qnqnaKp7hZaUY5Y

[@codetech5598]

@@aliptera Hover? Why do you need to hover? You just need to get off the ground high enough to clear obstacles and then fly forward using the wings.

[@expatxile]

That is an airplane, we don't want airplanes, we have a lot of those, we want flying cars.

[@TonyCrissy]

Muito bom

[@meyraibram8685]

Super

[@antonioranaldi3455]

are construction plans available? or the list of necessary components thanks

[@chenjl562]

Ehang is in Nasdaq, flyover machine.

[@manbox866]

How many volt batteries you have used

[@caseycappoen251]

Time for a generator + some light control surfaces. Mod the controller. Wire in a throttle and physical stick. Very easy.

[@roberthunter4884]

More powerful motors, the max passenger load is only 80kg or about 175lbs

[@caseycappoen251]

@@roberthunter4884 Im going to go for U15's

[@marciopaschoarelli4929]

Hi. Send features of Motors, esc, battery, propeller etc

[@edilsoncriadordeinvencoes]

Chou de bola👏

[@waynegramelspacher4131]

Too great of risk because of lack of redundancy for this to ever become a commercial product. Current configuration with additional pontoons would be fun water sports toy, though.

[@entranomeucanal161]

Cool

[@Rude_Earther]

Flight controller/ stability unit?

[@skyloveglobalnelsonbarbonc8009]

❤

[@siddarth_shetty]

Sir which flight controller is used? And how is the connection made? Thanks in advance

[@andreasjanssen8095]

Ski wookong

[@sebastianonipitella9360]

bravo. molto bene- gli manca un ala rotonda tipo disco volante. flying saucers

[@RS-ls7mm]

I wonder what the flight time is? I never see one fly for more than a few minutes in any of these manned drones.

[@curthensley3265]

Ya, I wanted the see the world from 6 foot, I'd walk around

[@beogradgagi]

Yours battery is on wrong place...put them in the center of mass and down! You will have better stability...great work!

[@Justwantahover]

It's about the most stable I have seen. And if he moves the batteries he will have to re program it too.

[@hassanali-gx7ck]

Hi man where i can get this motor and what is the name of the motore?

[@Denisfk1985]

Самое главное- пульт не выронить)

[@kurtdobson]

I would like to build one of these. Any docs and parts list would be helpful

[@AlexTriana]

With the payload under the props the entire system is more stable

[@juliusdelacruz5395]

fantastic! how long does your battery lasts for each flight sir?

[@DestianLight]

How high and how fast?

[@purushpurush2355]

How much money we need to make a complete new one sir

[@caglarkocak7509]

Wich motor did u use?

[@ravikumar5232]

Sir..this drone parts ..where are you buy ...please talk me

[@user-et4sv4bo7m]

It is really beautiful and I do not understand why strong countries do not invest in the issue to start producing a real alternative to cars.

[@JurekOK]

Because it is not a real alternative to cars. It is a toy. It is good at being a toy. For commercial applications, it's expensive and has poor capabilities - 80kg, 10 minutes single-way range @ 30km/h? there is no market for that.

[@kush6850]

do you sell the plans? parts list? i want too also build one

[@andreasjanssen8095]

Send me a Email to [e-mail]

[@chrishince8947]

Ya, but can they keep it under 250 grams? Lol Great work, keep it up!!!

[@christophersalmon3290]

Where can I buy one of these

[@YouInVR]

Should be two engines stacked on each other for more safety. Right, the engines are where they should :) Jetson looks cool, but scary at the same time.

[@markiethegamer6591]

What are the diameters of this Drone?

[@prashant1324]

Seem like he had forgotten this channel.He can strat tutorial series on making Drones from scratch including electronics hardware and software....

[@AZ-bx8yi]

Any new videos? You're obviously on the road to greatness :)))

[@andreasjanssen8095]

Will follows

[@AZ-bx8yi]

@@andreasjanssen8095 Sorry, not sure I am understanding..

[@iftikharguliyev]

What is the hegiht it can up

[@maimaibiri9045]

Looks like you can put mitresaw or chop on it XD

[@iflyevtol1827]

Do you want to sell these in kit form in the US?

[@MDRASEL-cp8ym]

nice plz help mei motors kitne mani paise milti hai flying Drone kaha par plz tell mei

[@pranavsingh4247]

from where i can order theses motors and escs ? plz share the link

[@finalcurtain6199]

Evolution

[@cccovers4459]

What is the name of motor?

[@MJPilote]

Cool but very unsafe, what happens if you loose any of the motors? You should have backup for each of the systems, contra rotation motors on each corner to backup if one fails? And so on, but still cool concept.

[@critterslee]

Id assume would need another whole motor and propeller not just contra props as would destroy the assembly if it let go /engine fails.

[@MJPilote]

@@critterslee I did mean that a contra rotating motor and prop assembly to backup in case motor failure. You just would drive the remaining motor harder. But failsafe system to other controllers to balance out the hurt motor.

[@LIMOEIRO10]

👏👏👏👏👏👏👏👏👏👏👏👍

[@upcomingvillain]

what flight controller?

[@alexsaini]

Sir which motor have used on this project 🙏🙏

[@andreasjanssen8095]

120100 and 60 KV If you are interrest Email me

[@themanofscience204]

Do you use any flight controller??

[@benjaminconway7830]

of course LMAO (He's using DJI NAZA V2)

[@stiglindequist5035]

Hi, Andreas, can I buy this machine and what will be the price? I have some pilot experience including helicopters so I think I could handle It with some training.

[@philarvetdrone]

@@admgmr1328 If your comment is serious : I know somebody who sells this machine (in US)

[@philarvetdrone]

As I see now, the comment wasn't serious... :)

[@epiculo2]

Any news? Are you selling the plans?

[@techtouche-244]

I want more learn from you

[@hilaygb1515]

Good project could you say the material build the quad

[@philarvetdrone]

Please read the description of the video

[@benjaminconway7830]

Can I have the design files?

[@rifkahanaindraswari6751]

What is the maximum height it can fly?

[@andreasjanssen8095]

Max 25 meters

[@pauljacobs772]

Nicely done! Do you have plans and a parts list you could share?

[@andreasjanssen8095]

Yes send me Email

[@MrVoice1]

@@andreasjanssen8095 what's your email?

[@andreasjanssen8095]

Jes i can send in two Weeks im in vacation Email [e-mail]

[@MrVoice1]

@@andreasjanssen8095 I sent the email

[@andreasjanssen8095]

Please give me two Weeks I on vacation, thank you. I send all the parts and measure list

[@aetheonpro396]

how heavy is this thing???

[@philarvetdrone]

About 70 kg (without the pilot !)

[@jetolayam5178]

Great, Where can I buy madtox controller air 400 amprs 60kv and this kind of bldc motor?? Tnx

[@andreasjanssen8095]

You can buy the full stuff by --> [e-mail]

[@Seriessopt]

this is not email add hahaha

[@user-qe1oq3ob3j]

Hallo! welche Motorsteuerung hast du verwendet?

[@andreasjanssen8095]

DJ wookong

[@mirkostohr3206]

Hi super Video!! Hätte ein paar Fragen!! Auch paar gute Ideen!! Wäre schön wenn Kontakt entstehen würde!!!

[@andreasheinz6648]

Hi Willst du auch eine Manntragende Drohne bauen?

[@user-zh7kt7ij5d]

there are all the videos

[@alpzbit1]

i need this moter

[@user-vi4tx9po7e]

Hallo Andreas bist du noch aktiv? Kann man eine liste aller Bauteile bekommen?

[@Omfoookd]

in future every person have personal helicopter

[@glasslinger]

BIG risk there! Many single point fails could send it to the ground.

[@tattooedteddy]

Do you like yourself? Cause this is pure negativity !!!! The man made this from scratch what are the odds that he is aware of this possible problems you pointed out? Or maybe you got the the solution maybe a link to the fixes you made on a 3D program ?

[@AZ-bx8yi]

@@tattooedteddy Settle down little cowboy, glasslinger was only speaking the obvious... single point, one blade faulting will send the AV to the ground. Using 6 blades is the simple solution, as it can stay in the air even if a double failure occurs. That is... if it is not side by side. Happy?

[@AZ-bx8yi]

Very good point.

[@finalcurtain6199]

I think One day, human will defeat gravity by just magnetik power

[@ljuborajictt]

👍 505

[@benjaminconway7830]

Whered you get the money to build this!

[@airgunningyup]

he probably has a job

[@philarvetdrone]

Possible to buy somewhere these components ? Engines, propellers, ESC ? I didn't find MADTOX Website...

[@airgunningyup]

he added the links in the description , but all the ebay links are dead.. the motors are about 900 each US , it seems they come with a 400amp esc.

[@philarvetdrone]

@@airgunningyup Thanks Rob for your answer. I had an email exchange with Andreas, he sent me all prices for the components. Motors are about 370 EUR each, ESC 400A 260 EUR, Helix props 290 EUR each (expensive !), batteries about 300 EUR, according to 7s or 8s - but globally, the total cost remains affordable...

[@mauristrofimov3709]

@@philarvetdrone Hello I'm working on a similar overhead positioned multirotor project and wanted to see if you could kindly direct me to where you could purchase these components (Motor,ESC,Prop,Battery) and review their specs. Thank you in advance!

[@philarvetdrone]

@@mauristrofimov3709 Please Mauris contact me on : phlarvet at gmail dot com - We'll exchange concerning these components. Best regards !

[@rational478]

I want to make a such drone . Can you help me ???

[@99tomy66]

Tolle Leistung, wir haben das deutsche Flugzeugselbstbauertreffen letztes August Wochenende in Bad Dürkheim, hätten Sie nicht Lust Ihr Projekt vorzustellen? LG

[@andreasjanssen8095]

Sehr gerne wir sind aber leider in Urlaub LG Andreas

[@AkshayPatwardhan]

Can you please share the electronic used in this I would like to build in india

[@AkshayPatwardhan]

[e-mail]

[@ff_Gaming097]

hw many things use into this drone

[@philarvetdrone]

Motors, batteries, props... I made the same big drone than Andreas. Works very well. Please send me an email, I'll send you the parts list.

[@tbrt-ne3ob]

Top... anti macet. Tp sayang satu dinamo kisaran harga 15 juta .kwkwkwkkw

[@jokidot8941]

ya benar brother? informasi dapat darimana, pingin coba buat.😁

[@tbrt-ne3ob]

@@jokidot8941 dr youtube...la

[@PraYogiz]

Yuk bikin

[@palokmondal6431]

বানাতে কত টাকা খরচ হয়েছে? how make to mani?

[@dkraja9052]

Bataiyga ya nahi

[@tazanteflight8670]

3 years, and no update.... hopefully it didnt crash.....

[@did3d523]

no ,news since 3 year ?? Crash ?

[@vikashbagheltecnikal2360]

Kitane rupay me bechoge

[@valdecino3357]

mada lik da loja onde vc compro

[@osvaldo1777]

deixá o ar prezo deixá sair o ar em um espaço pequeno o ar vai sair com mais força vai criar mais impulso na elice CRIAR um turbo deixa o ar sair no es Paço pequeno o ar vai sair com mais força mais impulso 👍

[@Aashishsmile001]

Bettery

[@rajubhai-dz2rq]

rite

[@csttwentyfirst]

I want to build this. How can I email you?