Android Steering Wheel Control Learning how to?

Program your steering wheel buttons to your newly installed Android car stereo head unit.
The stereo in this video is for 2007-2014 Mazda 2
s.click.aliexpress.com/e/_Dm7USan
Thank you for watching.
Stay healthy and safe!
My affiliate links, thank you for your support.
Get $50 off accessories, upgrades, and spare parts with the purchase of a scooter using my link below.
Canada:
apolloscooters.ca/discount/RUVRANDOMCA
USA:
apolloscooters.co/discount/RUV-RANDOM
Amazon Canada:
amzn.to/3El7eI8
Sun Peaks Resort British Columbia
topofthemountain.ca/a/chilaxed?page=/discount/
Thank you for your support.
Disclaimer:
Videos on this channel are in no shape or form of any advice, it is strictly intended for entertainment purposes only, thank you.

[@TechBerto173]

Simple but useful video. Thanks for sharing.

[@szetongng9663]

Thanks for your information!

[@ElderlyAnteater]

Do you know why mine not be responding to the calibration process at all? I have the same head unit, same car, and pressing the steering wheel buttons does nothing in that menu

[@ruvrandomusefulvideos]

Double check if all connectors at the back of the head unit are connected properly. If you have exactly the same unit it should work because it is designed for Mazda 2. Also try hard reset by poking the small hole "RST" with the pin and try the learning process again.

[@ElderlyAnteater]

@@ruvrandomusefulvideos Thank you - there is one plug from the car that didn't seem to fit anywhere in the unit, but I think it was for an RCA connection (for aftermarket speakers)? I'll try resetting it like you said. AFAIK the wheel controls should come through the main 20 (?) pin as there is no canbus connection.

[@ElderlyAnteater]

@@ruvrandomusefulvideos Sorry to bother you about this again - turns out there are two separate settings menus called "steering wheel control" on some Junsun head units. I found the other and it worked :)

[@markjackson438]

I am trying to program my android to the steering wheel controls. But I am having problem with the volume +/- the unit is seeing them as the same. + has a resistances value of 3000hms and - is 150 ohms. I have a spare switch and the resistances are the same so the switch is fine. Has anyone had the same problem and did you solve the problem.

[@ruvrandomusefulvideos]

Try to reset and relearn again

[@mynameiswoody4529]

for Ford Focus 2007, required canbus decoder? I use android ts7

[@ruvrandomusefulvideos]

This head unit has a canbus decoder builtin. If you bought the same one specific for you car, it shouldn't need any additional module to work.

[@rowell028]

Mine failing whenever I try to set the buttons 😓

[@ruvrandomusefulvideos]

I would do factory reset and try again.

[@maximusngx]

required CANBUS or not?

[@ruvrandomusefulvideos]

The car stereo head unit has built in, all plug and play.

[@amlucstereo]

please contact me to gether multimedia player from factory in Shenzhen CHIna

[@ruvrandomusefulvideos]

You can find my email on my channel description, thanks