Anest Iwata W101 Gravity swivel spray gun

Anest Iwata W101 spray gun demo 1.5 tip H2 air cap @20psi

[@mycarprobs6688]

I've used this spray gun, And can say it is top quality. You can get a really top quality finish with it. And for the price is a bargain i would say. Great all round performer, I've even used it for waterbase. Solvent base, 2k primer, laquer and topcoat. My setup is a 1.3 mm It's great for individual panels and i think with maybe a 1.6 or 1.8mm fluid tip it would be possible to paint the side of a car with one, while making significant savings of paint wastage. I would definitely get another and experiment with a bigger fluid tip.

[@rossterry8103]

I'd say that in the last ten years or so 1.3 has kind of become the standard for car painting, even with this gun being a bit smaller in regards to the fan pattern. My experience has been that the finer atomization of the 1.3 with a the pattern of a full size gun makes for a flatter finish. The particle size at 1.3 even fully open is still going to be smaller than say a 1.8mm almost fully closed all things being equal, although I'm sure you can play around with air pressure some to help mitigate things.

[@ahmetkorkmaz1044]

Thank you! Its helped me very much. Usefull video!

[@craiggerlach5548]

I just bought one of the 'cheap' units that showed hologram serial so looks authentic from listing at least, $55 USD shipped, so killer deal if it is.. Bought to paint primer n single stage on a 69 Buick GS. Will see how an anatuer does, been 30+ years ince painted often enough to feel confident, but used to weekend warrior paint jobs for buds in past and did well so confidence is high. Couldn't find much information on the gun until after I bought it, didn't know if was a smaller series, but the pattern I've sprayed in past wasn't much, if any , wider so I think I will be fine, going to do panels at a time after a roof skin replacement, liked the small cup for small jobs, and using Tabco black DTA primer so have long enough window to top coat or to apply high build atop then return to use as sealer before shooting a dark single stage. Nice vid, keep up the good work..

[@craiggerlach5548]

Ordered mine with the 1.5mm tip as well...

[@mreightytwenty8709]

Love your vedios mate

[@Lie83]

Hello, I wonder, you think I can use this with degreaser, wheel clean and that kind of stuff? Will that work?

[@craigwalsh2970]

Good review; very informative. Thanks!

[@clicks59]

Great video! Thanks for posting. I bought one of these guns. Can you share more information regarding the PPS 10 adapter you mentioned in this video? Thanks

[@brandonhensen7703]

With the 1.5 tip, do you think this would be good for painting gas pipeline stations? We use tnemec paint and strive for a semi-gloss to high gloss finish

[@jasonevans6720]

No, I think you need a much bigger pressure pot type set up

[@jeffdewe]

Great Video, I think I'll get one after this review, Thanks :)

[@super-z8943]

Is this gun suitable for mirror finish without orange peel? How is the overspray ? Thanks for the video.

[@jasonevans6720]

1.0 or 1.3 for a very fine spray, very good for small parts ie motorcycle parts, not very good for car painting

[@scottyoung2995]

Hi Jason Wondering if you can help me. I help a friend race motorbikes and i have been repairing the fairing when he crashes using rattle cans i am now thinking of having a go with a spray gun but don't know what gun to get etc i have a budget of around £100.00 for the gun can u suggest anything. Cheers Scott

[@jasonevans6720]

You can't go wrong with the w101, I suggest a 1.2 keep an eye out for a used one to save a few quid, an ANI R 150 is also a good option 1.2 the same because you need a smooth finish with bike parts

[@scottyoung2995]

@@jasonevans6720 thanks for the help. i found this one but it only goes up to 1.0mm nozzle A.N.I. R150-Q (superior silver finish) HPS Mini/Midi Gravity Spraygun

[@jasonevans6720]

@@scottyoung2995 should be ok

[@williamevans6554]

Good to see you back at last.

[@mreightytwenty8709]

videos