Thanks for this. So far you're the only American that's reviewing this gun. Was starting to think it was a dud. That even run was incredible I've never seen anything like that before.
@ANDY-we7mr2 жыл бұрын
Super like from me well done great finish on the clear coat very well explained have you got and on the iwata series 2 on base coat paint
@mrcorollaVA1 Жыл бұрын
Thank you! Cheers!
@mrcorollaVA1 Жыл бұрын
I do have the series 2 base coat gun, it also sprays exceptionally well. The air cap on the base coat ws400 series 2 is practically identical to the clear version, the needle is exactly the same and the only major difference is the nozzle. The nozzle on the ws400 base coat gun has smaller orfice which allow a lower fluid delivery rate than the clear version. Hope this helps.
@ANDY-we7mr2 жыл бұрын
Hi I have just subscribe to your channel iam interested in spraying car parts that's great when you put the settings on really helps people out who are just setting out
@diamonddetails9445 Жыл бұрын
You forgot to mention the ratios of clear, and it the temperature of reducer, not temperature of Booth. Other than that...
@mrcorollaVA1 Жыл бұрын
Every clear is different, the one I used is a uhs clear around 56% solids, super thick stuff. Air temperature was about 60 degrees , I mix it 2:1 with 5 percent reducer , the reducer I use is a medium speed and the hardener for the clear was also a medium. Hope this helps. I have a lot of air movement in my booth, so using a slower approach to the finish is better. Normally you would use a fast hardener and reducer , however, the slower you go with the chemicals, the better the flow , the better the finish.
@Vdubba2 жыл бұрын
Hi Joe, what is the cfm for the intake and outtake fans and rough size of your booth? The extraction is real nice. Semi down draft booth ? Thanks in advance 😀
@mrcorollaVA12 жыл бұрын
It’s 12.5 x 22 feet and 9 foot high, it’s a reverse flow semi downdraft. It’s custom made for my shop by merchant 1 manufacturing out of North Carolina. 30 inch fan with 2 HP motor, really happy I didn’t go with the 3 HP motor. It has a lot of extraction power which is great for waterborne paint but not so good for clearcoat. For clear, too much airflow causes the surface to dry too fast. So, too much airflow is not a good thing necessarily.
@Vdubba2 жыл бұрын
@@mrcorollaVA1 so your 30" 2hp fan is at your door end, do you have a similar fan pushing air from the top ? Thanks
@mrcorollaVA12 жыл бұрын
@@Vdubba correct, hence the Reverse flow. No other fan pushing air in.
@michaellussoro2295 Жыл бұрын
26 is about max pressure I go on iwata series 2 full fan 3-6 inches 90% overlap spies 8180
@diamonddetails94458 ай бұрын
❤❤❤😮😊
@AlvaroGarcia-su1dm7 ай бұрын
Where to buy in USA
@marklynsmith3510 Жыл бұрын
What name brand clear is that what so thick
@ricardog70412 ай бұрын
Can the WS 400 series 2 be used for base and clear?
@mrcorollaVA12 ай бұрын
@@ricardog7041 yes sir. Like any other gun, just need to adjust the fluid delivery knob
@ricardog70412 ай бұрын
@@mrcorollaVA1 Thank You 😃
@ricardog70412 ай бұрын
@@mrcorollaVA1 What nozzle do you recommend for the base and the clear?
@jeremyoetken20942 жыл бұрын
I have this gun 2 bar both coats lays like glass
@riccocool2 жыл бұрын
I don't want glass. I want speed and oem peel. Iwata is glass smooth or nothing and slow. Sagola 4600 and sata 5500 O here. Looks like you are painting in the managers office.
@jeremyoetken20942 жыл бұрын
@@riccocool I have about 20 different spray guns I think I understand what orange peel and matching factory finishes. Iwata the most glass like finish in my opinion.
@jeremyoetken20942 жыл бұрын
Oem peel is different on every make.
@riccocool2 жыл бұрын
@@jeremyoetken2094 I agree. Iwata is the most glass like finnish.
@Mooncou2 жыл бұрын
most factory sprayed cars now have a way too much orange peal is terrible and they sprayed by robots
@cabrezzy78382 жыл бұрын
How heavy is it?
@mrcorollaVA12 жыл бұрын
Made a vid on it just for you 😊
@cabrezzy78382 жыл бұрын
@@mrcorollaVA1 cheers bro!
@rodeocz9 ай бұрын
Ognuno dice la sua ma in realtà quello che conta è il risultato finale.
@maxmeyer742 жыл бұрын
1.7 bar no 2-2.25 bar
@jeremyeubanks23872 жыл бұрын
Dude that 1sr coat was way 2 slow.. that should have been the last coat ...
@illygarcia5002 Жыл бұрын
If u spray that fast open the fluid more
@mrcorollaVA1 Жыл бұрын
Thanks, the fluid was wide open, this is how I usually spray with my 5500 with 1.3 0 nozzle, which of you are familiar with Sata , the rp versions of the tip are larger than what they state. This was my first time so was watching what the gun did, how much air it used, etc. I got the 1.4HD which fits my spray style better.