Angel eyes and dynamic LED turn signals [Tail lights retrofit modifications HOW-TO] Alfa Romeo 159

[@tamerlanibragimov1611]

The niciest 159 ever existed. I simply adore it.

[@NikolasKolis]

thank you very much!

[@theilluminatimember8896]

The product quality of this video is next level

[@NikolasKolis]

I am very pleased to hear that! 🙏🙏

[@leopoldhazelzet4796]

I used to do a lot of modifying of my own, many years ago on Alfetta's, 75's and Giulia's, but grew older and tend to prefer keeping things stock on my current 159 SW. Yet, probably also because you've presented this in another highly professional footage, I'm tempted.... great job, looks the business! 👍

[@NikolasKolis]

I understand and accept your thoughts, but I think that 159 is not yet quite old to add something fresh, so I'm experimenting :D thx!

[@tamerlanibragimov1611]

@@NikolasKolis I hate most of the tuning parts being offered nowadays. Especially bmw like angel eyes or back lights made in Poland or Turkey, but your car, in spite of all the modifies you made, still looks like a fabric model and this is what I love about it. Special respect regards to the fact that you made all by your own and things like front lights are unrepeatable for most of the 159 owners like me. Great job, Nico! You've made a 159 icon.

[@NikolasKolis]

@@tamerlanibragimov1611 totally agree with you about things that are looking strange and alien to Alfa Romeo, but, since I love something unusual, I try to do it the way it would look if it was done at the factory! Thank you for such pleasure words! Большое спасибо!

[@arsov6924]

BRUTALNO!!! Kao i uvek... SVAKA CAST!!!👍👍👍

[@NikolasKolis]

hvala mnogo!

[@ikkilala6451]

why do you drive so close to the wall, T^T... almost had a heart attack.

[@NikolasKolis]

I was very much afraid of this ownerless bath ahahah

[@tamerlanibragimov1611]

me too. Especially after scratching my bumper of a wall in the garage.

[@Mlippy]

Перфектно! Когато си купя 159 3.2 скоро, това ще е от първите неща, които ще направя

[@systoyanoff]

Купи ли си?

[@Zwiastun666]

great job, great car, and this look....

[@NikolasKolis]

thank you so much!

[@pierre4857]

That back end is looking mean!

[@NikolasKolis]

and a little tricky :)

[@milanpanic4010]

Odlican video, velika pohvaka za objasnjenje i ne moze prostije da bude, bez muke za otvaranjem stop lampe, prosto jako, bavim se autoelektikom i to mi nije palo na pamet, sad je vec kasno da se igram sa mojom Alfom 159 Ali vec sutra i ona dobija angel eyes stop. Samo tako nastavi sve podrske

[@NikolasKolis]

hvala lepo! srecno!

[@supermenpoooo]

Boże jaki to piękne

[@NikolasKolis]

właściwy wybór!

[@anna_kolis]

Классное видео! 👏 Не зря так долго ждали 🤗 Давай вливайся в ютуб-трафик и радуй нас видосами чаще!!!

[@NikolasKolis]

пальцы, подписка, колокольчик!

[@Bi3dMaN]

Very nice quality video. Great job!!

[@NikolasKolis]

thank you!

[@SahucMcOffer]

Hands down best looking car of that age

[@bmwm5bmw610]

Bravo bro много добре изглежда като цяло АЛФАТА 😉👍

[@NikolasKolis]

много благодаря!

[@pedjabeograd]

Kao i uvek - ODLIČNO! :)

[@NikolasKolis]

hvala brate!

[@grzegorzborowicz2802]

Mistrzostwo! Zabieram się do pracy!

[@NikolasKolis]

Dzięki!

[@grzegorzborowicz2802]

@@NikolasKolis A jaki kolor wybrałeś 1156 BA15S , 1156 BAU15S, T20 7440?

[@NikolasKolis]

1156 BAU15S

[@markorn8724]

@@grzegorzborowicz2802 daj znać jak wyszło...ja też już zamówiłem ale zrobię bez efektu angel eye choć zajefajnie wygląda, mam nadzieję że przegląd przejdzie 😁

[@markorn8724]

@@NikolasKolis mocno się różnią?

[@alexandrebragaarq]

Perfect work! Congratiolations from Portugal!!!

[@NikolasKolis]

Thank you! Greetings to you!

[@svedjaninizciriha4933]

Bas brutalno svaka čast

[@NikolasKolis]

hvala lepo!

[@Gandalf606]

When will you produce a version for the Alfa GT? These look fantastic and really enhance the unique Alfa look. A Front Lights option would be amazing too.

[@NikolasKolis]

uhh good question :D I'll think about that ;)

[@Gandalf606]

@@NikolasKolis - thanks Nik. Just thinking how it would transform my GT 3.2 V6 :-)

[@anutkamois7348]

Красивая и хорошая машина требует к себе хорошего и аккуратного ремонта!!! Видео супер,отличный монтаж👍👍👍

[@NikolasKolis]

точно сказано! большое спасибо!

[@harj-spp8547]

Absolutely gorgous, gives a different edge to the rear, extra mean. The way you created the video and angles you shot, superb. One question, if you're still running this car or perhaps someone else please. Confused about step two. Do we need replace all the bulbs with some type of dual function or just one dual bulb each left and right? Plus I'm so confused on how its all wired. Also what are the silicone sticks? Thanks

[@claudiomolino800]

Congratulations are a sight. I like how you did it because it is a minimally invasive job. You may have spent time on rehearsal but you haven't opened the lights. Now I would like to do it too and I would like to have all the links to buy the right material and a description to do a good job. Bravo really good.

[@NikolasKolis]

thank you so much! you have all links to buy parts you need in the description to this video ;)

[@kostasag2085]

Wow great job.... I just made the order from your links and see how it goes.... my regards from greece..

[@NikolasKolis]

thank you!

[@elgritone]

You bought white or red led strips? Congrs , great work!

[@NikolasKolis]

white for more warm color in finish, red for more cold color in dfinish. both will be red but with a bit different shade& I used white :)

[@elgritone]

@@NikolasKolis thanks!

[@Sazuza2]

I'd love a few more insights on that sequential turn signals! they look dope

[@NikolasKolis]

ask me I'll try to help ;)

[@gaspergajsek515]

It looks AMAZING! Svaka cast💪🏼

[@NikolasKolis]

thank you puno!

[@cryodaniel1122]

thx for ur vids! Always ALFA! :)

[@shomy7318]

Вчера точно си мислех за нещо такова, браво!

[@NikolasKolis]

мерси! имаш сега инструкцията :D

[@shomy7318]

@@NikolasKolis Остава да намеря от къде да закупя материалите.

[@NikolasKolis]

@@shomy7318 виж описанието под видеото има линкове за лентите, крушките и модулите ;)

[@shomy7318]

@@NikolasKolis Благодаря ти много! Ще ти следя канала с удоволствие!

[@zoranm2433]

izdominirao si,po dobrom starom obicaju.... ps:zelim ovo na mojoj 156 hehe....pozzz drug

[@NikolasKolis]

hvala druze! trudim se da dominiram ahahah

[@nirdabastani2363]

looks great! Can you add the link to buy the led strip and also link to buy led bulbs just to replace the existing ones without the sequential ignition (this is not legal in my place)

[@NikolasKolis]

thx! all the links you can find in the description to this video

[@nirdabastani2363]

@@NikolasKolis i am looking to replace the backlight brake bulbs with led, similar to what you show but not dual function

[@mirkomontanari4832]

Bro awesome work and beautiful alfa!!!

[@NikolasKolis]

Thank you so much!

[@jasurjas7602]

Очень интересный и познавательный пост. Вот автомобиль СУПЕР.

[@NikolasKolis]

благодарю!

[@jasurjas7602]

@@NikolasKolis ya zdes.

[@ivomanov3500]

Браво чудесна работа, бързо, лесно, евтино и най-важното - ефектно! 😃 Понеже знам колко си обичаш и цениш колата, искаш ли да ти отправя едно предизвикателство!? 😃 Опиши ми на лично съобщение в Месинджър проект на стоповете на 159 за които си мечтаеш - Твоят проект, твоята визия за мечтаните стопове!!! Пък да видим дали ще може да го изпълним!!! 😉😁

[@NikolasKolis]

благодаря много! ще ти напиша :)

[@vfrhonda]

Peut on régler le scintillement des clignotants, la cadance est un peu trop rapide je trouve. Mais l'ensemble est vraiment très bien 😉 👍

[@NikolasKolis]

yes, later I made it a bit slower. Thank you

[@vladleonard86]

Show more details about wireing and where to buy the products

[@NikolasKolis]

please check description to this video, you will find links for purchase the products and info about wiring. If you'll have more question feel free to ask me there

[@dom1natorrr]

svaka čast majstore

[@NikolasKolis]

hvala hvala :)

[@АндрейМ-ч9л]

Шикарно получилось. Респект

[@NikolasKolis]

благодарю!

[@lufetm]

Odlican posao!

[@NikolasKolis]

hvala lepo!

[@mladenkaradzic3836]

You really love your car. Great idea bdw!

[@NikolasKolis]

Oh yeah! Thank you!

[@mijvin]

Auto je brutalan, svaka cast! Dizel ili benzin? Koje su ovo felge? Hvala i pozdrav iz Stuttgarta!

[@NikolasKolis]

hvala lepo! dizel 2.4 q-tronic felge inforged ifg26 (aka veemann vfs26) kzbin.info/www/bejne/onO1m5aupK6tmNU Pozdrav!

[@wouterkrooshof2527]

I Imagine it's also possible for the headlights instead of the full circle angel eyes right? These look a lot better in my opinion!

[@NikolasKolis]

headlight has a different shape (circle) and you need to experiment with the form, but I agree, it would be better than the usual circle angel eyes

[@wouterkrooshof2527]

​@@NikolasKolis I really want to try this on my rear without the turn signals. - LED strips - only white, each light needs it's own? So I need to order 4? - Silicon tubes - Matte tape Do I need the resistors from the comments? If so, how many? :) Thanks in advance!

[@NikolasKolis]

@@wouterkrooshof2527 yes, white color. You can buy 2 and separate to 4. Silicone tubes I found in hardware store. Matte tape in stationary shop You need resistor for position lights 1 per side -50w6j

[@chaviechase551]

Отлично смотрится, спасибо за видео. Не так уж и много подобной инфы по красавице 159 Хотел бы уточнить детали по подключению проводов итд, но ток если есть время это все описать ^^

[@NikolasKolis]

Большое спасибо! Загляни в описание к видосу, там расписал более-менее, если останутся вопросы - задавай, расскажу/объясню как смогу )

[@chaviechase551]

@@NikolasKolis Принял,уже после того, как пост написал ниже нашел описание, благодарочка )

[@knyf9713]

Could you please provide new links because they don't work?

[@Kyirux]

Oh man, I wish I have those on mine 159. It looks so good, even better at night I guess. Any chance that you could make a pair for me?? 😅.

[@NikolasKolis]

sorry but no chance, its only hobby to me not a job :D

[@Kyirux]

@@NikolasKolis Ako je hobi, znaci radis to iz ljubavi haha Steta, pisao sam ti i na insta, bas sam se zagrijao za njih, predobro si ih uradio 👍

[@Kyirux]

Nasao sam nekog turcina, radi aftermarket farove pa cu vidjeti sa njim da mi uradi po zelji..

[@NikolasKolis]

@@Kyirux odlicno

[@NikolasKolis]

@@Kyirux nista bez ljubavi hahah

[@andreyalekseev2948]

готово! все сделал, но вот столкнулся с вопросом какие нужно ставить резисторы и на что? только на стопы или на габарит тоже? короче сколько нужно резисторов? и каких?)

[@NikolasKolis]

По одному на стопы и габариты с каждой из сторон (4 всего). Резисторы 50w6j. Один провод к минусу, второй к плюсу (габарита или стопа соотвественно). Сами резисторы закрепить саморезом к кузову

[@markobijelicc]

Odakle si,pratim te vec duze vrijeme i snimci su ti odlicni.Kako prevodis naslove videa,mislim na svakom jeziku ima prevod?

[@NikolasKolis]

uu to tesko za odgovoriti :D ja sam ukrajinac, zivim u glavnom u Bugarsku ali i u drugim zemljama regiona i sveta. Tako da znam vise jezika (oko 7) i mogu da prevedem naslove, opise i titlove :)

[@markobijelicc]

@@NikolasKolis Svaka ti cast.Posto vidim da odgovaras ljudima iz Srbije i Rusije.I imas snimak iz Beograda pa sam mislio da si iz Srbije.A jel imas ti neku posebnu opciju na KZbin za prevod naslova.Posto meni na pocetnoj pise na srpskom jeziku,udjem u video ono na engleskom,pa mi nije jasna fora.Hvala za odgovor!

[@MrMalemodelalex]

Wow, everything about this video was awesome...... and the way the car looks, SO SEXY! Triple thumbs up lol

[@NikolasKolis]

thank you veeeery much 🤗

[@szilardserfozo8085]

My problem is what kind of modules did you have for sequential ignition? If you can tell me the exact type i can made the same as you but mine now not blinking just when i turn on it's just on whit the led strips. :) I hope you remember the modul types. Thanks in advance and awsome videos.

[@radostinpetrov5313]

Hi there. I did this to my 159sw and it’s awesome. But these days the temperatures are very high and I see the silicone sticks are melted down. I don’t know what is their melting temperature but be sure you use sticks with higher melting temperatures.

[@NikolasKolis]

Hi! Yesm I use 300+ celcious degrees melting, and have no any issue with them. Try to find similar and change

[@radostinpetrov5313]

Thanks, I’ll change them.

[@nikolajovanovic5023]

Svaka cast

[@NikolasKolis]

hvala!

[@GabLoletto98]

nice work, how did you do the double white reverse light? ty from italy

[@hobbymakemyhappyp7709]

Fajny efekt! Zajebisty film!

[@NikolasKolis]

dzięki bardzo!

[@TheBaroncik]

Здравствуйте Вопрос Дорого содержать Alfa Romeo 159? Хорошие видео по Alfa Romeo 159

[@NikolasKolis]

приветствую! спасибо! дорого или нет - достаточно относительный вопрос, смотря с чем сравнивать. однозначно дешевле чем например БМВ, наверное на уровне Ауди плюс-минус, может чуть дешевле

[@pete3897]

Is that an after-marked RHS rear white reversing lamp? Mine is a red fog lamp and I'd be keen to change it...

[@NikolasKolis]

its from RHD car

[@Razem_Poza_Droga4X4]

Ciekawe czy dało by radę w 166 tak wymodzic 😉

[@NikolasKolis]

166 potrzebuje innego stylu

[@theilluminatimember8896]

That looks fxcking epic! 🔥🔥🔥

[@NikolasKolis]

Thank you 👍👍

[@filipdjacic6158]

Auto perfektno izgleda svaka cast. Posto vozis alfu da te pitam jer se I mn ovo auto svidja kakvo joj je odrzavanje jel skupo? Kolko su joj gume I registracija za npr alfu 159 19jtd 110kw 150ks?

[@NikolasKolis]

hvala lepo! ne bih rekao da je skupo odrzavanje, rekao bih da je jeftinije od audia i bmw-a naprimer. mali servis izadje oko 70-100 eur. registracija zavisi od drzave, to ne mogu da znam za sve :) kao i gume zavisi od dimenzija, firme/modela itd

[@filipdjacic6158]

@@NikolasKolis Hvala. Auto mi se bas svidja. Ni jedan auto mu po izgledu nije ravan. Dosta ljudi govore alfa ne valja alfa ovo alfa ono. Ako ga ne odrzavas mora se kvariti ko I svako auto. Pozdrav

[@NikolasKolis]

@@filipdjacic6158 tako je bas tako

[@kroczas]

everything is fine, but show you how to connect this module. where and what wires should I connect with each other ...

[@edwardlipa4890]

Światła świetne :O , zmiana przeciwmgielnych na dwie strony i wstecznych również na dwie jak najbardziej na plus zwłaszcza że te pojedyncze wsteczne daje bardzo mało światła. Kierunkowskazy ? Hmm.. jak dla mnie to trochę przesada, myślę że styl całych świateł czyli te trzy osobne hmm komory nie pasują do tego typu kierunkowskazów. Tak czy inaczej, bardzo fajny pomysł, podoba mi się i chciałbym takie :D (bez kierunkowskazów :P ) Pozdrawiam serdecznie :) Bardzo ładna alfa

[@NikolasKolis]

bardzo dziękuję za komentarz i opinię! doceniam to

[@bogdanflorin7539]

Helloo, best and top modification, i have 3 questions, 1: Led strip needs resistors for no error?... 2: Where did you get silicone sticks? And 3: Led strip color is only white?.. thank you

[@NikolasKolis]

Hi! Thank you! 1 - Yes, need resistors 50w6j 2 - in a hardware store 3 - yes, only white color

[@giacomoguajana]

Riesci a far un video per capire i collegamenti elettrici delle strisce a led? grazie

[@danielmielcarek4679]

It look amazing. Whis alfa is AWD?

[@NikolasKolis]

thx! its FWD automatic

[@mendesrich]

Hello!!! I have a 2.4 jtd van and I will try to do what you did! but I have doubts... what light exactly do you order in the leds for the half moon?! red to orange or white to orange? and another doubt is which number of the 3 available for purchase you choose in the last link!!? already in the description you mention that there are 2 for the brakes and 2 for the change of direction, but in the link you mention, it only has for the change of direction!! use the same?! there are 4 led lamps I have to buy?!

[@sebastienmartinot5587]

Bonjour, merci pour cette vidéo qui et superbe j'ai une question je suis entrain de faire la même chose que toi et je bloque sur l'alimentation de la veilleuse stop car j'ai toujours la veilleuse allumé de l'ampoule ! Comment tu fais pour le branchement merci

[@ЛаЛиса-э2щ]

Дело, мастера боится! Спасибо!

[@NikolasKolis]

что есть то есть :)

[@torostutuncu007]

Welldone 👍👍👍

[@NikolasKolis]

thank you!

[@BlazingMusic01]

This looks so sick. Love the style the video is filmed! Gives me an idea if it would also work on my lancer

[@NikolasKolis]

thank you! yeah, it will look great on lancer x too, we have a bit similar tails :D

[@BlazingMusic01]

@@NikolasKolis yeah exactly. Just have to see if the insides are the same if it will work

[@NikolasKolis]

@@BlazingMusic01 let me know ;)

[@pierrickvisiteur8561]

Hello my friend ! Thx for your video. I have a question about bulbs. Can you explain me what sort of bulbs i should buy per lamp (left and right) - normal bulb for left or right turn signal (have you got a aliexpress link ?) - DRL + Turn signal (X2) - normal bulb for reverse light it it ok ?

[@hugoribeiro8437]

Great job! But is still there any rear fog lights? Or did you remove it?🤔👍👍👍

[@NikolasKolis]

thx! there are 2 rear fogs, you can see it at 01:57

[@hugoribeiro8437]

@@NikolasKolis my bad! Sorry! Made a mistake with brake lights! 😂 =) nice job!!

[@NikolasKolis]

@@hugoribeiro8437 no problem :) thank you!

[@Peperino189]

Greetings from Italy 💪🏼💪🏼

[@NikolasKolis]

Salutare!

[@daniilgarkavy6370]

Не столько сама переделка понравилась, сколько видос.:)

[@NikolasKolis]

Хаха 😂 спасибо!

[@TeoAdi]

Hello, thanks for the video! I've noticed that the parking light and braking light are on the same bulb. How did you manage to keep only brake light on that bulb? thanks

[@NikolasKolis]

Hi! Parking lights connected to the "angel eyes rings", and brake light becomes only one

[@TeoAdi]

@@NikolasKolis Ok thanks, I'll try that 🍀

[@user4t-6fj56]

Машина мечты)

[@MarinkoDubravac]

Evo mene opet studiram ovo vec dva dana i zanima me 3 zica sa mogula gdje se spaja dvije idu na zuti sjaj drl sijalica jedna na masu sijalica a treca 🤔 i kako si zalijepio polovinu stapica na led traku 🤔😁

[@NikolasKolis]

sa modula za dinamicke zmigavce ulaze dve zice - jedna je minus i druga je plus/kontakt od zmigavca sto ide fabricki, i izlaze 4 zice - jedna minus, i tri za lampice zmigava - prva i druga za zuti sjajeve drl i treca - za fabricku zutu sijalicu

[@williamong289]

Hey mate, love what you have done to your Alfa! Looks great! What are the silicon sticks and tape that you’re using? Thanks.

[@NikolasKolis]

hi! thx :) silicon sticks are from hardware store, tape is usual semitransparent tape

[@PolCueille]

Super ! Pour les deux feux de reculs, vous avez simplement commandé le feux arrière de la version anglaise ? Cela nécessite un recablage du feu ? Sur quoi avez vous repiqué l'alimentation des leds ? Sur le faisceau directement ou avez vous remplacé la cosse originelle ? Merci d'avance !

[@NikolasKolis]

yes, GB version second reverse light, and 3 min with wire change for that. The original output did not change, I connected it directly to the wiring

[@lonely992]

Nice work 👌 whitch size of exhaust pipes, 100or 114mm,,?

[@NikolasKolis]

thx! 105 :)

[@hakan_dere]

Very nice...

[@NikolasKolis]

thank you!

[@pedjaboskovic5554]

Have you been in Montenegro a couple days ago? I think I saw you in Podgorica, I recognized your alfa and BG plates

[@NikolasKolis]

right, I'm still in Montenegro :) love this country

[@pedjaboskovic5554]

@@NikolasKolis you are welcome here :) This is one of the best looking 159s :)

[@NikolasKolis]

@@pedjaboskovic5554 hvala ljepo druze!

[@stuartvaughan-williams7257]

Hi Nikolas. My last message does not appear to have posted. Could you provide a video or diagram for connections for the dynamic turn signals. I've got all the parts but the connectors are not common so it is a bit confusing! Also the comments regarding resistors are only for the angel eyes, correct, as the bulbs have resistors already connected? Thanks.

[@rabbitboy008]

Yes I like it - A LOT

[@NikolasKolis]

thx

[@snoopdutt1985]

Take all of my money now! This would look awesome on my SW

[@NikolasKolis]

ahahaa :D its true, will look awesome on SW too ;) you have links to purchase all you need to do it in the description for this video

[@snoopdutt1985]

@@NikolasKolis just none of the skill to do it 😁

[@NikolasKolis]

@@snoopdutt1985 just try :D not so complicate

[@Thefastturk]

Man so Nice !!! What is your rim name and how many inch is it ?

[@NikolasKolis]

19" Inforged ifg26

[@FrancescoGrosso1094]

Heyhey! I've got a question for you regarding the remapping of the ECU and the clutch. How long ago/how many km ago did you remap it and how's the clutch on that?

[@NikolasKolis]

I dont have clutch because of automatic transmission, anyway I made remap 80 000 km age and everything is just fine

[@gienkollo]

Very nice 👍

[@NikolasKolis]

Thank you!

[@TheMonster-ne1ch]

Hello ! Do you have a link for the silicone sticks I don't see it anywhere ... You do 4 resistors or just 2 ? Thanks !

[@СеменРадионов-э8п]

Машина пушка. Видео отличное. Какие диски и резина стоят на машине?

[@NikolasKolis]

спасибо! диски inforged ifg26 (aka veemann vfs26) 19" 5x112 8.5J перед и 9.5J зад. резина 235/35/19 перед и 265/30/19 зад видос с ними: kzbin.info/www/bejne/onO1m5aupK6tmNU

[@СеменРадионов-э8п]

@@NikolasKolis Спасибо большое)

[@СеменРадионов-э8п]

Хотел спросить какие из трёх перечисленных подходят на альфу и сколько нужно штук что бы так фары сделать? Перешёл по вашей ссылке. Очень фары круто сделали тоже себе хочу так сделать)) 1156 BA15S 1156 BAU15S T20 7440 Заранее спасибо большое за ответ))

[@NikolasKolis]

@@СеменРадионов-э8п 1156bau15s наш вариант ;) цвет белый + оранжевый 2 комплекта

[@СеменРадионов-э8п]

@@NikolasKolis понял спасибо вам большое, а для ангельских глазок 4 шт Led полоски только белый цвет и если можно каких размеров? Спасибо вам за ваши видео) Машина у Вас бомба!

[@ItachiUchiha-lr3yr]

Looks great I want to do this but how did you get both the left & right side reverse lights to be white. On the original light the left side is white for one reverse light but the right hand side is red for one foglight.

[@NikolasKolis]

EU and GB versions has different sides for reverse/fog lights, so I found one tail light with reverse white section from GB version and changed mine EU version tail light with red fog light section.

[@ItachiUchiha-lr3yr]

@@NikolasKolis Thanks do you have an updated link for the LED strip as this one doesn't seem to work for me, also how do I connect the sequence boxes into the car wiring & how many boxes do I need? Also how did you get your TI side skirts to stay on? Many Thanks

[@istvanjager]

Hi ! I saw the alpha 159 tail light tiing video! Let me ask you a question: where and what is the name of that sequentials module! Where did you order!

[@NikolasKolis]

Hi! Check in description to this video there is a name and link to order

[@stuartvaughan-williams7257]

Regarding the bulbs, the Ali express link lists 3 options: 1156 BA15S, 1156 BAU15S and T20 7440 and only white/yellow not white/orange. Can you clarify the correct option and is yellow actually orange in this case? It appears you need bulbs with sockets, not just the bulbs, correct? Also when you installed the UK reversing light fitting did you also install white/red dual bulbs on both sides to keep the reverse and fog lamp capability? Cheers mate.

[@NikolasKolis]

hey, you need BAU15S, and yes, yellow is actualy orange only white led bulbs for rear

[@stuartvaughan-williams7257]

@@NikolasKolis Cheers mate. I was also wondering did you use dual (white/red) bulbs in the reverse light lenses to maintain a reverse/fog light configuration after you installed the UK reverse light fitting?

[@stuartvaughan-williams7257]

Oh sorry mate i realized already asked and answered. However I would do that. And the black roof: assume paint not glass.

[@F1f0n71]

Lamps are reworked? Originally on the right is the reversing light and on the left the fog light. How did you change the color of the lamp from red to white? A good question? 😉

[@NikolasKolis]

the second reverse lamp is from GB version (they have inverted reverse side and fog lights) - easy and useful ;)

[@F1f0n71]

Well done, mega creativity.

[@NikolasKolis]

@@F1f0n71 thx!

[@lucann807]

Ma di notte si vedono le frecce? Perché non mi sembrano molto luminose

[@NikolasKolis]

risplendono più luminosi delle frecce normali

[@cristianlazar5406]

Very nice and beautiful work,how much it cost?i whant to by,not to make it...

[@NikolasKolis]

I dont make it for sale, its just a hobby for me

[@alfa166v]

Where do you get the silicon sticks from?

[@NikolasKolis]

hardware store

[@ervinkalabic2446]

hello, did you remove position bulbs ?

[@danydeleo]

Great!!!! VERO STILE ALFA..!!

[@NikolasKolis]

Grazie mille!

[@eminem8612]

Looks great! I bought all I needed, but when I connect the right side bulb of the outer tail light, which should only light up when the break is pressed down, it flickers all the time. When I press the brake it lights constantly as it should but all the time when it's not pressed it flickers. Did you put additional resistance?

[@eminem8612]

And also how did you fit the drl lights under the plastic bulb holder? Does it even snap in place?

[@АляксейВаладзько-ч8ц]

Смотрится круто! Только видос сделан так себе. Текст на черном фоне всю дорогу бесил и закрывал все самое интересное)

[@NikolasKolis]

спасибо! текст на черном фоне - это субтитры, которые можно отключить в настройках ;)

[@toldiikiller768]

Hello I would like to know exactly how many LEDs I need with dual function (I would appreciate a quick reply: D)

[@NikolasKolis]

4 led bulbs with dual function (2 pairs)

[@toldiikiller768]

@@NikolasKolis thank you very much 🤩

[@m.l-b.b943]

Amazing 🔥👍🥰

[@NikolasKolis]

Thank you 👍👍