I was dying to see this..searched a lot.. finally got it.thanks to you.. it will be better if u taught everything visible n audible rather than background music
@anketkamtekar5 жыл бұрын
Thank you for suggestions..i try this
@vandanaverma60305 жыл бұрын
So swt of u
@SurajKumar-wz5nn Жыл бұрын
hello, my design for this, (as per this tutorial) is not rotating continuously as per this design (just one little vibrate and then stop). any suggestion where as i made correct note as per this tutorial. where i am missing?
@ramonhamm38855 жыл бұрын
Nice, simple to follow, I assume you can use block names too for the gears rather than group names. I like how you cut out the long boring waits and consolidated the video, that goes a long way in making a good tutorial, good job!
@anketkamtekar5 жыл бұрын
Thank you...
@KnowledgeWorldExpress4 жыл бұрын
For 3D gear with calculation pleas refer kzbin.info/www/bejne/iWjciICLeLuIbq8
@umeshkumartripathi98065 жыл бұрын
Very nice vedio sir Today we learn something new in autocad 3D about animation Thank you very much sir Please continue to making thease types of vedio.
@anketkamtekar5 жыл бұрын
Welcome ।।।
@nkmotox Жыл бұрын
Big fan bro
@yuvrajb46964 жыл бұрын
Superb well done as thanks bro
@tientcheuchena7531 Жыл бұрын
tres bon tuto mais la jai une question cmt enregistrer cette animation en mp4 ou wmv genre video /
@mahmoudbayoumy756 ай бұрын
if i wanna Learn The 3D CAD for metal founding where i should starting from ?
@UDEngineeringSolutions-dm9cs4 ай бұрын
hi very nice video.
@huibheijboer32252 жыл бұрын
Most people don't understand what is happening here.... By running the script you select an object by name (the group) and ends selection by the empty line 4 and after that you rotate the selection it by the given angle (1 in video, mentioned as speed) At the end of it you restart the script by the rscript command. Repeatedly rotating over a small angle provides the suggestion off continuous movement. Nice script anyway..
@raskraskrask5 жыл бұрын
Let one empty line at the end of the script. I dont know why but in that case I dont need to hold enter for a continous movement! Otherwise the code stops.
@MegaFaisalpk7 жыл бұрын
You're great .. very informative thankyou sooo much sir
@anketkamtekar7 жыл бұрын
Welcome Dear.........
@ericpham78712 жыл бұрын
If use in hydraulic maybe need more clearance is better isn't it?
@silentmusic73752 жыл бұрын
Nice video. Can I ask where did you get the introduction where the logo of autocad is moving?
@MM-vi9kh4 жыл бұрын
I created one gear. But when I rotate it, it just rotate for few angle. I want to make it rotate continuously???
@vkistics4 жыл бұрын
which background music it is? is it Nocopyr8 ?
@praveenkhare25376 ай бұрын
Thanks lot
@ericpham78712 жыл бұрын
Thanks.
@NoNo-ml9wo4 ай бұрын
Hi Sir, why rotate the gear when I need to hold on the enter key?
@靄-m1k3 жыл бұрын
It says that "-1" is an unknown command, therefore not executing the script, how do I fix this?
@midhun67703 жыл бұрын
superb!
@miguelangelbertoni12876 жыл бұрын
thanks , very helpful
@muhdfirdaus1223 жыл бұрын
Hi Sir, can i use this method on bike chain
@anketkamtekar3 жыл бұрын
Better way to use 3D software..
@ruthestevez12 жыл бұрын
esa pequeña animacion de engranes se puede grabar como video??
@ashwinisalokhe95724 жыл бұрын
Effective in simple way
@yuvrajb46964 жыл бұрын
Bro can you make video on creating mechanical components such as knuckle joint using AutoCAD, Nx etc programing
@itsmura64524 жыл бұрын
is it possible to animation 2D motion using a script too, like moving object one from Point A to Point B?
@anketkamtekar4 жыл бұрын
Yes..its working with 2D drawings
@itsmura64524 жыл бұрын
Anket Kamtekar darn, i was hoping to be able to animate a 3D model. I’ll definitely be using this in the future tho! Thanks
@jean-mylenebonevesque73193 жыл бұрын
nice and simple! How can i do the same animation with a 90 degres gears (perpendicular)? thanks!
@amirhosseinansari98572 жыл бұрын
i writed this in autocad 2022 but it rotate just 1 degree what can i do?
@jagadeshsan74805 жыл бұрын
Is it possible to rotate different direction like differential gear
@AC3DCad6 жыл бұрын
can I just rotate halfway?
@anketkamtekar6 жыл бұрын
Its rotate motion so you can. Rotate 360°
@UDEngineeringSolutions-dm9cs4 ай бұрын
when i make the script file in notepad. that is not showing after the script command in autocad
@vijay64427 жыл бұрын
good sir.tq so much
@anketkamtekar7 жыл бұрын
thanks & welcome
@mimicba11146 жыл бұрын
helpful video, thnx 🙂
@rocky80044 ай бұрын
Make this same video with voice communication so that everyone can easily understand which command you are using
@thienphan58725 жыл бұрын
GOOOOOOOD man ....
@АлександрПопов-э1ш4т3 жыл бұрын
When I starting up the script it's saying: "Unknown command "ROTATE"." Have any idea what I'm doing wrong?
@somdebsar73783 жыл бұрын
Very Nice Video Sir, Can you please provide the code for animation of four stroke engine, please I want to animate my engine on autocad
@anketkamtekar3 жыл бұрын
I tried but not possible in Autocad Better way to use any 3D software ..like Solidworks, Invetor Catia etc.
@edwintjoa60995 жыл бұрын
I have a issue with the region, as the gear teeth created using Arc and Line not "joined". Any suggestion how to correct for this? Thanks.
@anketkamtekar5 жыл бұрын
When creat gear teeth with array cammand so its create with associate array..mean sigle entity .. First explode this array and see all gear teeth are not in associate mean individual entity.. Then try to region or join..
@edwintjoa60995 жыл бұрын
@@anketkamtekar Thanks. I disable the associative on the polar array and can use Region to combine the gear.
@anketkamtekar5 жыл бұрын
@@edwintjoa6099 Sure...👍👍
@sagarnamdev33933 жыл бұрын
How you disable can you tell me steps
@TETOYVIENDO4 жыл бұрын
Greetings ... I follow all the steps but in the last step of writing "SCR" in autocad and selecting the gear.scr file that is on the desktop ... autocad tells me: Unknown "ROTATE" command. Press F1 for help. pls help!!!!
@valentinlishkov95403 жыл бұрын
FREE sheet metal, gears, curves and others www.onlinecadtools.com/myindex_en.HTM www.onlinecadtools.com/english/html/sheet_metal/index.HTM www.onlinecadtools.com/english/html/index_gears.HTM www.onlinecadtools.com/english/html/index_curves.HTM www.onlinecadtools.com/english/html/index_st.HTM kzbin.info/www/bejne/bYiUkJ2AZr2KsNE kzbin.info/www/bejne/il7Mo3iFerSBaNk Thanks! I need advertising and orders
@alexandrumusat14534 жыл бұрын
i can't create regions... it says: 1 closed, degenerate or unsupported object rejected. 1 loop extracted. 1 Region created. How to fix this? (i think he can't create regions using arrays)
@anketkamtekar4 жыл бұрын
Make sure your array profile not associate ..if its associate so explode it and try to region or join
@alexandrumusat14534 жыл бұрын
Thank you, i will try
@rafaelklusi79345 жыл бұрын
On AutoCAD 2018. I saw if u write Enter in Script after rscript its starting a Loop. BUT CAD is freezing sometimes
@anketkamtekar5 жыл бұрын
This is the problem of version...i also face this problem
@rakesh95584 жыл бұрын
Sir, can we take same rotated video output.?
@anketkamtekar4 жыл бұрын
I can't understand what you say exactly
@kennedysundayi32095 жыл бұрын
AutoCAD is dope
@anketkamtekar5 жыл бұрын
Think before comments...Autocad or any software are not dope..you are not able to use this...
@crudhousefull4 жыл бұрын
@@anketkamtekar He means that it's great brother. Dope = awesome
@bernardbilazon4886 жыл бұрын
sir why i got only once rotation when i open the scr file?? its not rotating continuously.
@anketkamtekar6 жыл бұрын
bernard bilazon Just hold enter or space key ..
@phalgunijakkilinki32803 жыл бұрын
I can't able to region the teeth and circle.. they r not joining.. can u pls explain
@anketkamtekar3 жыл бұрын
Plz check your teeth profile is not associate..
@bobbyyugendar39753 жыл бұрын
thanks a ton, but how to mount gear on a shaft with motion analysis can you pls explain in steps sir pls?
@anketkamtekar3 жыл бұрын
AutoCAD has no any features to check ansis
@doniwisnu2 жыл бұрын
I does not work with me. I followed exactly but the result is the rotation did not move continuously. The rotation was jumping arbitrary (not continuous).
@neelsuratwala6 жыл бұрын
Is there any way to rotate the gear continuously without holding space bar or enter key?
@anketkamtekar6 жыл бұрын
Its i try in older version of autocad ..its work continuing ..but in newer version must required to run this command again and again ..thats wile you must hold space bar or enter key..
@gaurangkelkar43762 жыл бұрын
There is one way, While making script in NOTEPAD, After write "RSCRIPT"...Just give one enter and save this file in script format ..and then run...definitely u will get your answer.
@Hesborn_Oduor Жыл бұрын
this worked for me, however, the speed of rotating is too slow@@gaurangkelkar4376
@natashalojingon89862 жыл бұрын
Hello...why mine needs to specify rotation angle?
@natashalojingon89862 жыл бұрын
btw i'm using the 2022 version
@caiqueflorindo86617 жыл бұрын
Is this possible with AutoCad Electrical ?
@anketkamtekar7 жыл бұрын
Try this...
@anketkamtekar7 жыл бұрын
Caique Florindo Yes..
@akilaiyyamperumal16846 жыл бұрын
hi, thanks for this video . in my autoCAD only one gear rotate and that too onky one time, space / enter is not working too
@anketkamtekar6 жыл бұрын
AKILA IYYAMPERUMAL Check script must .. And hold space baar or enter tu continues apply this command then see your gear wheel rotate continues
@akilaiyyamperumal16846 жыл бұрын
it running continuously, i checked my script also but still gear 2 is not rotating. g1 is rotating
@anketkamtekar6 жыл бұрын
AKILA IYYAMPERUMAL So what's the problem ... Now create new Autocad file and new script
@akilaiyyamperumal16846 жыл бұрын
problem is only one gear is running. both gear is not rotating
@akilaiyyamperumal16846 жыл бұрын
rotate g 1 22.2878,12.5116 -1 rscript rotate g 2 14.9672,12.5116 1 rscript
@janinikunj81166 жыл бұрын
Hello brother i make it script file with .scr but i faced problem invalid point specify based point then i select center point of gear 1 but only gear 1 is rotate gear no. 2 is not rotating pls give me a solution
@anketkamtekar6 жыл бұрын
Make sure your script description is correct as show in video..
@janinikunj81166 жыл бұрын
anket kamtekar yes correct
@devbhavsar51132 жыл бұрын
how can i rotate both sides first clock 90 then recenter then counter-clock 90 again recenter repeat and how to do side moment ( right and left )
@michaelshilts32865 жыл бұрын
It is not working for me. At my object would rotate once. I then would hold the space bar or enter but it does not work. It asks me to select object and base point.
@anketkamtekar5 жыл бұрын
Some time its error in latest version..same problem i face in Autocad 2019....but its workong with AutoCAD 2017
@michaelshilts32865 жыл бұрын
@@anketkamtekar OK thanks. Didnt work on 2016 or 2020. Good to know for future needs though. thanks
@anketkamtekar5 жыл бұрын
@@michaelshilts3286 Welcome... Try this in old version hope its works...
@marianagallardo55785 жыл бұрын
Favor, sigo los pasos hasta el último, scr y no me aparece la ventana del escritorio para copiar lo grabado, no se si puedes ayudarme, gracias
@anketkamtekar5 жыл бұрын
i cant understand whats the issue ....
@indioarmani82092 жыл бұрын
my objet only move once rhen i have to press enter for each rotation angle.
@Gegyeggy7 жыл бұрын
How would i go about changing the axis of rotation?
@anketkamtekar7 жыл бұрын
Change the id point
@Gegyeggy7 жыл бұрын
which one is the id point again?
@anketkamtekar7 жыл бұрын
If you want change the rotate axis so you can replaced the object axis center id
@Gegyeggy7 жыл бұрын
How do i change the rotate axis from the wordpad (if possible)? Sorry im super new to this
@anketkamtekar7 жыл бұрын
Greg B Copy the axis point id of object which you want rotate... And paste into wordpad on specific place
@muhdfirdaus1223 жыл бұрын
Why when i want to region the gear, it cannot region ? I have make sure all the line joined.
@anketkamtekar3 жыл бұрын
Make sure your polor array is not associate.. Just explode the array and try to join this
@matthewsedicos88197 жыл бұрын
Hi sir I wrote the same scrip as yours but it only moves 1 step. My object is not a gear though
@anketkamtekar7 жыл бұрын
Matthew Sedicos Its only for . Rotate motion.... You can rotat any abject around select center point
@anketkamtekar6 жыл бұрын
Dark Sad Check script note again... And try
@anketkamtekar6 жыл бұрын
Dark Sad Check associate option when you create arrey command
@joechung4575 жыл бұрын
there is a problem about scr , ı saved file same way but it couldn't find file can u help ?, if you understoood :D
@anketkamtekar5 жыл бұрын
Save the file on desktop
@joechung4575 жыл бұрын
@@anketkamtekar That's what I did. The file is on the desktop already. I just can not get it from AutoCAD .No matter I typed SCR or scr, the screen was still showing " the file cannot be found".
@anketkamtekar5 жыл бұрын
@@joechung457 No dear I say just confirmed it you have put dot . Before file extension in rename Not a comma ,
@anketkamtekar5 жыл бұрын
@@joechung457 And when you select this file by Autocad then select all type file in browse
@joechung4575 жыл бұрын
@@anketkamtekar I did put dot. Not a comma.The name of the file is " gear.scr" . I put the file on the desktop.
@farrukhmukhamedov11072 жыл бұрын
Again I ASK You PLEASE show to me how to use Simulation in AutoCAD, I need it for testing parts and buildings, (from the basics for me) (PLEASE do not advise you to use AutoCAD revit and so on)
@anketkamtekar2 жыл бұрын
Autocad have no option to check simulations of parts ... You need to 3D software for that..
@sahilkadam97373 жыл бұрын
Excuse me sir, I tried this but it is not moving. What is the reason?
@anketkamtekar3 жыл бұрын
Check the script...then hold enter key ..to repeat command again and again
@sahilkadam97373 жыл бұрын
@@anketkamtekar they are asking me to specify base point
@AzkhaaaaaАй бұрын
why i can't region all, the gear cant be regioned
@AzkhaaaaaАй бұрын
my gear doesnt move smooth bro, why?
@ymautomation39832 жыл бұрын
Sir work nahi ho raha hai rotate angle Required kya kare
@ericpham78712 жыл бұрын
In complex drawing using macro so next time other can repeat save time
@royalexcon29324 жыл бұрын
when I run the script, it appear {Unknown command "G"} (at group 2.) How do I solve it, Please .
@royalexcon29324 жыл бұрын
Sorry sir, I restart every steps carefully, and I get it. Thanks a lot.
@athulkrishna9064 жыл бұрын
This script is only useful in 2d ,not for 3d.he faked this script
@caddcentremumbai37157 жыл бұрын
how can we enter the rpm and time period of the rotation????
@anketkamtekar7 жыл бұрын
Cadd Centre CST You can enter speed of gear as RPM.. Can't enter specific RMP.. and there is no any option for timing.. When you enter scr command.. Object will rotate till command end..
@vitalin.85816 жыл бұрын
wow
@Tureknowledge42863 жыл бұрын
My gear is not rotate what I do
@GHOST-BATTLE Жыл бұрын
i did the same but not working in AutoCAD 2021.
@shashishekhar77117 жыл бұрын
How can i use this comand in hydrulic celender
@anketkamtekar7 жыл бұрын
Shashi Shekhar You can use this command only for object rotating
@bijayketanpanda16804 жыл бұрын
How to increase speed of gear?
@anketkamtekar4 жыл бұрын
Check in video at time 5:00
@leonardobird5 жыл бұрын
How about AutoCAD 2007 version?
@anketkamtekar5 жыл бұрын
Try it..no idea about 2007 version..
@anketkamtekar5 жыл бұрын
I hope its work with 2007 version
@leonardobird5 жыл бұрын
@@anketkamtekar thank you
@anketkamtekar5 жыл бұрын
@@leonardobird most welcome
@arronnunez72305 жыл бұрын
mine only rotates once why is that?
@anketkamtekar5 жыл бұрын
New version has run this command one time..just hold enter or space baar to run command agian and again
@arronnunez72305 жыл бұрын
@@anketkamtekar also if I have 2 groups it wont run. But if I have only 1 object it runs.
@anketkamtekar5 жыл бұрын
@@arronnunez7230 Just change the rotation value and try...
@balat3dcadguide1814 жыл бұрын
AFTER ROTATION AUTO CAD HANG Y?
@anketkamtekar4 жыл бұрын
Its system problem..
@adminlasiva778810 ай бұрын
I need the lsp ..can you give it free ?
@joshuajacob31995 жыл бұрын
how do i extrude in autocad 2020
@anketkamtekar5 жыл бұрын
Same command or tool as shown in video .. Doesn't matter which version you have.. Like Autocad 2017 ..18 .19..20
@saulromero83195 жыл бұрын
Crack
@loveonly55204 жыл бұрын
Sir it doesnt work what i do?
@anketkamtekar4 жыл бұрын
Check the script
@NankangDorcas Жыл бұрын
my own script can not be located
@ibnunafisalkhawarizmi91223 жыл бұрын
Autocad tutuorial Versi 2016 please
@roxanaelizabethrochamanche82274 жыл бұрын
NO ME COJE EL -1 ME SALE COMO INVALIDO POR QUE ?
@smsenterprisestechnologyso34192 жыл бұрын
how to define the speed of the objects
@anketkamtekar2 жыл бұрын
Check at 4:58 1 value for speed ..you can increase this..
@phucminhbd5 жыл бұрын
Bạn ơi muốn làm con trượt chạy ntn
@marianne96465 жыл бұрын
Mine won't rotate
@anketkamtekar5 жыл бұрын
Are you done all steps properly
@sagarnamdev33933 жыл бұрын
Region in my drawing is not working
@anketkamtekar3 жыл бұрын
Make sure ..the profile draw perfectly.. Draw once again new profile in new drawing..
@germaincondoriaguilar51102 жыл бұрын
no se puede, segui los pasos y nada
@rse7enkun8095 жыл бұрын
it only rotate once
@rse7enkun8095 жыл бұрын
When i use region somethings wrong
@anketkamtekar5 жыл бұрын
Its issue with latest versions.. Just hol enter or space baar for run command continuely ...try it
@jagadeshsan74805 жыл бұрын
Expect to explain not a music background
@technicalsovan31223 жыл бұрын
orvi acha ho sakta tha
@hariharan46745 жыл бұрын
Voice please
@anketkamtekar5 жыл бұрын
Sure .. Thank for advice
@hariharan46745 жыл бұрын
@@anketkamtekar Thanks for your response and we are waiting for your updated video
@adria04-224 жыл бұрын
unknown command "-1" anyone please help me
@anketkamtekar4 жыл бұрын
Which command?
@adria04-224 жыл бұрын
@@anketkamtekar why it only rotate once sir?
@adria04-224 жыл бұрын
I'm using autocad 2018
@adria04-224 жыл бұрын
Autocad said Unknown command "-1". Press F1 for help
@anketkamtekar4 жыл бұрын
@@adria04-22 I am also facing this problem in Latest version..its working well in AutoCAD 2017 ..but in 2018 ,19 & 20 its rotat at once in command..
@luzolivera95115 жыл бұрын
Que yo no se que se podia hacer eso (soy un niño)
@rizqiyt21229 ай бұрын
so fast af i can't following what you do
@prajwalalangekar65956 жыл бұрын
.
@smichaelsolorzano31703 жыл бұрын
yo encontre la solucion o el error como quieran decirlo
@ranjodhsingh86389 ай бұрын
What is the solution brother. Mine is not working it vibrates a little and then stops. And through a error like unknown command 1 . Which I never pressed. Help