Another 32 Vestel ?

[@gjt2209]

I really enjoy your channel, thanks for sharing your knowledge. I had a very similar model with exactly the same issue from a skip last month. There was also an issue with the main board on the Freeview input, one of the primary colours (red) was missing. £5 for a board, £6.50 for new backlights and another £5 for a remote equals a happy Grandson.

[@brianjames6890]

Another one bites the dust Allen. Many thanks as always for your uploads. Best regards, Brian 👍👏👍👏👍👏🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@zx8401ztv]

I hope you didnt forget to stick those strips down, you assembled the screen parts with loose led strips. I noticed lol.

[@Calcraft11]

Don't leave the KZbin Community! KZbin as a whole will fall to nothing without you.

[@MrProtector65]

thank you again, regards. 😸

Faulty led driver board? what do you use to stick the stripes back on?Am glad I have many used parts.....

[@franke5478]

For me it's unclear what you check when you try to light them all up? You don't say anything about over current? In other videos they measured the current with about 360 mA. The LED driver (MP3349 - on the backside of the pcb under the backlight connector ) powers off the backlight. If you follow the traces from led driver tot he connector you can see that all 4 led output traces are 'going together' 0 ohm resistors. Could you explain your change of the leds? My TV is powered off the led when it was in stand-by but it work (from time to time) when it was disconnected from the socket. Thank you. 🙂

[@irishguy200007]

He goggled it.

[@Dimpless1964]

Are you still on the radio Allen?