Tippmann Cronus Paintball Gun - Maintenance/Repair

[@alexbozas887]

thank you, this was very very helpful. I managed to service mine thanks to this clear instructional video.

[@seanpineda6786]

thanks super helpful step bye step

[@saturdaysquad8652]

I have the tippman crouns but the tactical version I really enjoy the gun

[@xxxsanyeo]

Sasuge Peasant Its a nice gun

[@yaboibeeler6927]

xxxsanyeo I haven’t been able to adjust my FPS

[@alexdm887]

really great informative video

[@ziacineplex]

I really like this gun. My question is, is it regulated and if so is it adjustable? Awesome video!

[@ANSgearPaintball]

it doesn't have a regulator, but you can adjust the velocity.

[@skiddysm]

Just bought one brand new and the valve had random junk in it once i got that out it worked perfectly

[@C2DMNFNP]

Great video, a little better lighting to see the black components inside would be nice. When you occasionally angled the gun the various components could be seen and distinguished from each other much better. Perhaps in future videos if you find it appropriate. Overall great quality thanks! Side note, the manual says " Make sure the Barrel O-Ring is in place inside the Barrel Adapter." That was a little confusing, as the picture in the manual isn't that clear and there is a spare white o-ring in the packaging, so I wasn't sure what that was for, but I think that goes to the Rear Bolt like you explained in the video. I think the Barrel O-Ring is black and I think I'm seeing it in the Barrel Adapter.🤞🏼

[@ANSgearPaintball]

Thank you for the feedback! If you need any assistance feel free to reach out to our customer service. www.ansgear.com/aboutus.asp

[@isaakwinkle5305]

@@ANSgearPaintball is the spare o ring in the packaging just a spare o ring or do i need to install it?

[@stevengrunza128]

Is there a Stryker vid coming up?

[@carolinemorrison4341]

Can you put an a5 barrel adapter in this gun instead of the original Cronus one?

[@ANSgearPaintball]

The adapter will not work with the Cronus as it is different from the A5. A barrel adapter will not work either since the front of the body is rather restrictive. If you would like to upgrade the barrel I recommend an A5/X7 barrel that is thin on the back for example: www.ansgear.com/Tippmann_14_Pathfinder_Barrel_Black_A5_X7_p/tippmannpathfinderbarrel.htm

[@vincentwizard5082]

when you go to new videos about that new Tippmann

[@christophertorres490]

Nice video currently having a problem with velocity it will not crono more than 200 with screw turned all the way to either side. Using Compressed air any ideas what it could be?

[@mag1c938]

Use english

[@1truthbegettingtold275]

Screws aren't tight, he did use English.

[@bishop9000]

On another video someone said because of the small inside diameter of the barrel insert, the options for upgrading the barrel where limited. Are you able to remove the barrel insert, so you can use any a5 barrel? Does the insert have any effect on the functionality of the marker? Or is it's sole purpose for attaching the suppressor barrel shroud thing?

[@ANSgearPaintball]

You need to have the barrel insert in the gun to use the gun. but you can modify it like by sanding it out to be able to accept larger barrels.

[@a64738]

I absolutely hate the clamshell design... Me and a friend bought a Tippmann PTX (some of the early ones) and every time you broke a ball it was 20 - 40 min work to clean it with tiny bits and pieces flying everywhere every time you opened that damn ting... We never was able to make those things shoot more then 3-5 balls without malfunctions.

[@Mattefjonk]

Are the sand colloured rails on the side neccesary for the structural integrity of the casing? Or can you remove them if you dislike the how it looks?

[@ANSgearPaintball]

you can take em off

[@xxrobtherulerxx4854]

My cronus leaks air everytime I put a tank on and I'm certain it's coming from the valve is there a way I can fix it?

[@ANSgearPaintball]

Yes of course this video will provide all the information you need. You may also need some o-rings: www.ansgear.com/ANS_Complete_Colored_O_Ring_Kit_3x_Rebuild_Bag_p/ansoringkitclr3xbagtippmann98.htm

[@abenshoof100]

did y'all do this BCS of the tmc coming out?

[@hellaacapella]

Can you use regular firearm oil to lube this gun?

[@johnnystock7294]

So what inspired you to make this video?

[@joeyruzic6369]

My cronus trigger won’t pull back and no it’s not on safety please help

[@xxxsanyeo]

If you want to sell your cronus and the barrel has those scratches and you want to get rid of them to make it look newer you can get black permanent marker draw some on your finger and rub it all on the scratches and put it in the hole in your hand like this > 👌 and twist it for a while and it looks brand new

[@anthonycruz9944]

So how often should it be serviced?

[@ANSgearPaintball]

It depends on the kind of use you're putting on it and how much paint you're shooting through it. If you play every weekend and you're shooting a lot of paint, then it might need it once every 1-2 months. If you just play like once a month, then you can go for like 6 months between maintenance.

[@wethenorth3695]

ANSgearPaintball would it be enough to take the barrel off and sqeeuge it and the the in the marker? Or should you completely take it apart?

[@mag1c938]

Every time you play use a squeegee and every few months do what he did

[@GarciaAndy33]

So we cant change the feedneck correct?

[@gurzmatgurzmat7918]

Can cronus use same replacement parts as a-5??

[@KipGuitar1]

Can you add the extra pieces from the tactical to the basic cronus?

[@ANSgearPaintball]

what do you mean?

[@codyd9089]

If you are talking about the stock, suppressor, and carrier then yes. You can get it on amazon for 50 dollars.

[@KipGuitar1]

Cody D I have the basic cronus. I was wondering if u could add the top rail etc. To my basic cronus

[@KipGuitar1]

ANSgearPaintball that's for the reply I love my cronus it's my first paintball gun and it's great I got it at walmart. I just basically want to add the extra pieces that the tactical has. Like the top rail the different barrel the back part

[@ANSgearPaintball]

hey, this is what you'll wanna get for that project: www.ansgear.com/Tippmann_Cronus_Mod_Kit_p/tippmanncronusmodkit.htm

[@stephensolano3087]

I can tell you’re an expert for sure but you gotta move slower and show the piece before you put it back in. Very good video for taking apart but once it can to putting it together I had to refer to other videos

[@Blaze575]

My cronus bolt is skipping, when I fire a few shots the bolt just skips back and forth, please help

[@Sixty-Nine1987]

**Watches the vid intently while holding the piece he's wondering about** "And that's about it, the gun is really simple in design and not much else to it" **Still holding the black tiny piece of plastic that blew off when I used my air compressor to dry the insides..** O.o "Uhhhhh... Are you sure thought?"

[@Sixty-Nine1987]

FOUND IT!!! There is a tiny piece of plastic in the handle that blocks a hole that would appear if this piece was missing when you put the gun back together.. This piece of plastics blocks that hole, and the hole, is exactly where you would expect your E trigger adjust to be if you had one.. This gun does not have such, and due to it's grip fed air, could not ever have such.. So I guess this piece of plastic is just a filler.. Not that important.. But the way that piece looks with the built in pins on either side of it, almost makes it look important.. lmfao..

[@theboldix1]

I need the orange part pls.

[@illusionalgaming359]

is it possible to attach a tipmann a-5 double trigger to a cronus?

[@alantorres5459]

If I buy the stock for this gun does the screw come with it? If not we’re can I but that screw

[@ANSgearPaintball]

This is the complete kit. www.ansgear.com/Tippmann_Cronus_Tactical_Mod_Kit_Black_p/tippmanncronustacticalmodkitbk.htm

[@edwardsedgley1714]

1000th like! Thanks for the help!

[@brandon_4965]

So what has to be lubed

[@ANSgearPaintball]

All o-rings and moving parts should be cleaned and lubricated.

[@1234567890sks]

Great

[@taylorpage2740]

Dose anyone knows the size of the trigger spring

[@ANSgearPaintball]

I was able to find the spring for you on Tippmann's site, but I can't seem to find size. Hopefully this helps: www.tippmannparts.com/TA40013-Cronus-Sear-and-Trigger-Spring-p/gp17237.htm

[@taylorpage2740]

ANSgearPaintball thanks for the reply

[@yunghold9618]

What's the best size tank to use on a dangerous power G5

[@officeralgh4337]

Yung Hold I'd recommend a 20oz works the best

[@xdivineHART]

Mine is leaking air

[@artemijszodziks3666]

спасибо

[@ANSgearPaintball]

Пожалуйста

[@Jaykilla1981]

Glock needs to make a marker

[@DiabolicNick]

Roosterteeth were using these on their extra life livestream XD

[@gmoneycruz9105]

First

[@sweettards5039]

i can’t get the spring to go straight it bends when i try to fit the stock on

[@ANSgearPaintball]

If you need some help with your marker or have any other questions feel free to give us a call at 805-522-8700 & we would be glad to help.

[@isaakwinkle5305]

How often should i do this stuff? I just got one

[@royalp5088]

Can u change the Cronus to a double trigger?

[@FeoChicke5x]

Could you use an apex 2 barrel on the Cronus?

[@ANSgearPaintball]

It will not clear the shroud. You will need to modify it to make it fit through the shroud.

[@Rmagamer123]

I know I’m late but how often should i clean my cronus?

[@nappyj5677]

i just bought a tippmann cronus and the trigger won't pull any idea to fix it?