ANTEC C8 WOOD + TRYX Panorama 360 AIO

[@Enjerupan]

looking into getting this AIO its so nice to look at,, you did a great job for this build.

[@napoficial7123]

The cpu cooler is beautiful, but I'm 100% of the time watching the monitor to find headshots 😂

[@JoJoLux2013]

Thx for the cool music ! and nice case with "fire "colors and Calcifer eating the eggs ( if a have this one, i will probably make me some omelette every day ^^) .

[@scott1391990]

With yellow lighting on the fans, it does look cool

[@creativemids]

Where did you find the video of the bar scene on the CPU cooler?

[@Piero128bit]

Hello... Which controller for fun antec? N.3 antec p14 and n.3 antec p12r.... Which for back fun ?

[@lolly_bread]

Nice. This is the case I'm getting. As someone still trying to learn about fan configs I'm confused about yours. It seems that you have Rear: Exhaust x 1, Side/AIO: Exhaust x 3, Top: Intake x 3, Bottom: Exhaust x 3, so 7 x Exhaust and 3 x Intake. I figured the top should be Exhaust due to heat rising? Also I read that there should be slightly more Intake than Exhaust to achieve positive pressure, which also reduces internal dust. Any thoughts as I'm genuinely trying to learn before buying?

[@kYnTso]

Came back to this video after i realized the King 95 doesnt fit the same EATX motherboard as in this video, so most likely going with this aswell. Technically ur right about the fans though, heat rises so the bottom ones should be intake and the top ones exhaust. I probably will put my rad on the top as exhaust and use the side as intake, so looking at 3x 120mm intake fans for the side, 3x140 intake fans for the bottom a 140 rear exhaust fan and 3x120 with the radiator on top....

[@andreamaral9725]

There are reverse fans not sure if these are reverse fans though

[@lolly_bread]

@@andreamaral9725 Yes they are. If watching in a PC browser, pause at 3:35 and use the "," & "." keys to toggle frames back & forth - you'll see.

[@Piero128bit]

Which controller for p14 and p12r?

[@theodorecano4]

Where did you plug in the aio pump by any chance? Im seeing another video saying cpu opt and other cpu fan

[@RasMatumbi]

the aio liquid h170i cepellix of 420 funs don't fit for 0.3cm upside! inpossible to put downside or on the side in vertical (is about 3cm taller) so now i have a 250 bucks liquid that i can't put in XD

[@RasMatumbi]

but anyway is a very good pc case!

[@youdiedtm]

you set all of the fans to exhaust. terrible.

[@vento5314]

2:28 stop doing this.

[@ludovicavice3496]

Why .?

[@vento5314]

@@ludovicavice3496 Watch the Gamer Nexus video named "Stop Doing It Wrong: How to Kill Your CPU Cooler (AIO Mounting Orientation)".

[@MackTasticDE]

@@ludovicavice3496 i was going to comment the same thing, having the radiator with in- and outlets on top makes that the highest point of the loop which will result in air being always trapped there lowering the cooling performance and causing unnecessary glurping noises.

[@ludovicavice3496]

@@MackTasticDEis it not better than having the pump higher as the air bubbles may cause damage to the pump ?

[@MackTasticDE]

@@ludovicavice3496 yes absolutely but having the hoses coming up makes the radiators top part the highest point of the loop so airbubbles would get stuck there. The pump would only have to move air once.

[@taomahNEGEV]

No fresh air for the PSU is a big NO.

[@danteba]

????????

[@kYnTso]

The back side is full mesh. 😂

[@taomahNEGEV]

@@kYnTso It makes both the PSU and me happy.

[@flaccus123]

Moron

[@youdiedtm]

did you notice EVERY FAN IN THE PC is set to exhaust??????