ANTI BALL BALL VAPE | What is that? | Vapvana

[@Trap..house.]

This has to be my favorite KZbin channel, great honest reviews and tips! Came for a puff co video a while back and never left 👏

[@MoOiAmATree]

Heck ya! Thank you for the support! This is going to be a good year.

[@Vapvana]

Thanks for the great first review Moo! 🙏 Looking forward to your next video and deeper dive 🤘

[@MoOiAmATree]

Heck ya! Woooooooo

[@CloudCollector840]

Hopefully we get a comparison video between the vapvana vs mini nail flower wand next. Great Vid, Great Channel. Mooooooo!

[@MoOiAmATree]

I hope to go over the b1/b2 from cannabis hardware and then have a battle with the 3 of them!

[@Rottidog68]

Loved the unboxing & session, Moo! That thing looks amazing, from what I can tell in the reviews. Yours is the second I know of, WTG. It's going to be a popular ball(less) vape. Looking forward to the follow-ups! cheers

[@MoOiAmATree]

Thanks! Ya this is a good one for sure I will be looking forward to see if it gains traction in the community. CH has such a strong foothold

[@brooklynyoblon1536]

Wow - this was the most professional succinct and sober review I’ve ever seen about any vape‼️🙏🏻 My screwball arrived a few days ago and it’s a very nice well thought out pretty polished unit. However - the titanium bowl has gotten stuck inside the my glass female joint every single time. It will slide out after a few minutes of cooling and no glass has been broken BUT I wouldn’t use the bowl directly inside your good glass bongs. Place it in an ash catcher or pass thru adapter instead. 🤪

[@MoOiAmATree]

Ya that’s the problem with metal bowls and heat expansion try using something with a non frosted joint works much better

[@MoOiAmATree]

Thank you!

[@Odinarcade00]

I’m not even sure what a ball vape is exactly I just heard they are awesome and I wanna try one.

[@Rottidog68]

Oh, trust me, you need too! lol Cheers

[@MoOiAmATree]

In the mini nail video I explain on a base level how they work. But yes you do need to try one they are next level!

[@hectorsotomayor556]

I need one of those scoops where did you get that question mark you should make show revolving around accessories...🎉

[@Lebrawlski]

Awesome video. I wasn't even aware of the screwball before this. Are you planning on testing out the Crossing Thermal Twist Injector at some point?

[@MoOiAmATree]

Not sure yet I will take a look at it thanks for the suggestion.

[@beauboorman1227]

Great review buddy!

[@MoOiAmATree]

Thank you! The support is always appreciated.

[@jerryjuicesmokes]

Absolutely amazing breakdown.. truly the best video I have seen on this device. 👀 you impress me Moo

[@MoOiAmATree]

Appreciate that

[@LukeWigginsMusic]

This is the end game , haven’t smoked since I got one.

[@MoOiAmATree]

This is the way!

[@piplup10203854]

7:24 Lol! I love that mam, that had me laughing. I honestly been stuck on what Ball Vape to get. I just bought a 7.25 inch Recyler with a Matrix Percolator and a quartz banger and carp cap. This is my first time having a rig, so I am not sure if I am getting the right stuff but I got an Ispire Wand because it's just temporary till I can save some money for a ball vape. I am torn between the B2 Flowerpot Essentials Bundle, and the Old Head Terp Hammer and dab ready because I like concentrates but my doctor told me to try flower but I don't have a way to do that so I got the Inspire Wand induction heater so I could at least use my water pipe with the concentrate cup and banger included and I figured worst case scenario to try flower I could get a Dynavap I just don't know which one but I know the heater will work for it :)

[@MoOiAmATree]

I would lean towards the B2 the quality on it is way better than the terphammer. Also the dab ready is ok but for what it is it’s super over priced. You could check out the cobra coil by Disorderly conduction. Now CH also has the zenleaf line. The wand DV combo is a great combo especially for beginners.

[@MoOiAmATree]

If you are on discord we talk about stuff like this all the time on my server. Come join us! discord.gg/73PVhE4Fa5

[@piplup10203854]

@@MoOiAmATree 🤔 Ohh, I see so the B2 is still top quality and better than the terp hammer? Thank you 😊. I also think the Dab Ready is overpriced that is why it was so difficult like is it actually worth that because for that same price the bundle for the B2 from CH is a lot more appealing. Ooh Zenlife Line? 🤔 I will take a look and good for beginners helps a ton :D and yeah I really like that DV combo as I can use either the half bowl or full bowl and I got that Ispire Wand already then I can try that flower but save a little bit of money. Thanks for reading, it's nice there are some options, so I can save for the B2 Bundle and just pretty much answer both my flower and concentrate needs or the DV Combo so like a DV Vong(i), Helix Tip, and Perforated Cap and I'd be set. Thanks for answering my question it's challenging being a newbie and there's just all this stuff.

[@piplup10203854]

@@MoOiAmATree Thank you for the invite :) I am not on Discord and not quite sure what it is but I can check it out :D

[@Egzoset]

If the little spheres were optimized for heat conduction that would still imply a loose thermal (mainly surface) interface, while i'd find foam makes more sense as with the VaporGenie SiC Foam they call a "filter", actually manufactured by ERG Materials & Aerospace. Why waste so much energy in such manner when Induction Heat could solve the problem of convective conversion, with a 2-WAY behaviour alternating between convective heat sourcing and relative thermal insulation, depending on airflow turning it into a solid-state inhalation-actuated thermal valve... If it must be balls then at least think of trying some 0.4 ~ 2.5mm (dia.) SS430 Round SS « Shot Balls », as used for peening/blasting (metal polishing)! The interstices will fill air pockets with burning-hot air ready to flood a bowl as fast as it can be followed by fresh air, which in short promotes « con$ervation ». Etc., etc. The one main disadvantage being a huge contact-surface with intensely heated metal. But glass balls, really! Something got stuck somewhere.

[@peaceandwealthseeker4504]

I can say disorderly conducts PID are awesome. I rip at 430 and never drops a single degree even I blow on the coils. The pinky with a DC PID has been the most efficient setup I've tried

[@peaceandwealthseeker4504]

450 combusts it quick right around where actually charts say

[@MoOiAmATree]

That’s cool never tried one of theirs really been interested in the cobra coil

[@joaquincalvi8050]

Great vid as always! How do you think this would compare in terms of vapor production and taste to the flower wand?

[@MoOiAmATree]

Good question! I think the flower wand had a bit more flavor but my friends with big lungs could cool the wand down too much for me and my baby lungs I almost don’t have enough oomph to really power the screw ball to max. The screwball holds heat more so you could for sure take bigger heavier denser rips.

[@hollernathan]

Hi, does the screw ball head that contains the lower screen ever need to be replaced like the bowl screen does? Thank you.

[@MoOiAmATree]

Nope

[@ninetendopesaitama2107]

It would be interesting to just get the Housing and bowl as I have already several enails and 20 mm coils. Of course for a 20 mm coil as this one is 25 mm as you showed. I don't get why they make custom coils in a size which is not common. ☮️

[@Rottidog68]

I believe you can get them PID-less. Moo has a link in the Description, with 10% off! Cheers

[@MoOiAmATree]

This one went for a bigger coil for more media check out cannabis hardware for 20mm coil housings

[@ninetendopesaitama2107]

@@MoOiAmATree I have a new vape (now cannabis hw) vrod but not the right part to make it a ball vape. Also not every 20 mm coil fits the vrod as you probably know due to the way the vrod is built. Therefore im interested in this device you showed. ☮️

[@ninetendopesaitama2107]

@@Rottidog68 yeah I know but it's the wrong size. 20 mm would be perfect. ☮️

[@Fernando_Woolybooger]

Where did you get that stand that you can see towards the end of the video? Not the included stand.

[@MoOiAmATree]

Cannabis hardware but be careful it kinda fits the screwball but gets stuck sometimes

[@maulaucraw1209]

🙏

[@soulja617]

Did u ever have to adjust or mod the B2 flowerpot ball vape coil ?? I have it and the experience just hasn’t amazed me as much as people made it seem out to be

[@MoOiAmATree]

Yes you want to make sure it is very tight around the core.

[@d77sauce]

Still liking the Screwball? Deciding between this and the Mininail, or something else with a small PID

[@MoOiAmATree]

Yes!! The screwball is great if you have strong lungs

[@d77sauce]

@@MoOiAmATree hell yeah

[@Matador7290]

Great review thank you !

[@MoOiAmATree]

Thanks for watching !

[@elevatedevaluations]

Great video!

[@MoOiAmATree]

Glad you enjoyed it thank you !

[@redeyes24321]

Hey, can you please confirm that this works with the cannabis hardware heat post. I saw another person said the screwball got stuck on theirs?

[@MoOiAmATree]

It does work I have not had mine stuck but I have seen people mention this I’m not sure maybe it’s a generation thing with the heat posts

[@redeyes24321]

@@MoOiAmATreeThank you!

[@jtmunn4496]

The only thing wrong with the screwball is they don't make a 14mm bowl. I've been asking for over a year for him to come out with a 14mm bowl so I won't have to buy a new 19mm rig to use the vape when I already own 30 14mm rigs.

[@MoOiAmATree]

So true!!!! I have been thinking the same however I have noticed when using the 14mm post on my b1 I get hot spotting. With the 18mm the airflow is more even to the walls what I did is got a 14 -18 adapter and that works great no hot spot

[@meefvongrau9814]

How often do you have to clean this thing?

[@MoOiAmATree]

The bowl once a week maybe depending on how the screen gets and how much hash I’m using.

[@goneone]

I wonder if anti social social club will sue them for ripping them off?

[@MoOiAmATree]

😵 I doubt it but who knows

[@lunah4695]

Yo, so like... Can I plug it into my audio mixer? 😭

[@MoOiAmATree]

That’s funny this stuff is 5 pin so maybe the lighting console

[@growingheart8039]

Faceted 👁👄👁 💎

[@MoOiAmATree]

💍💎💍

[@xiggroc]

Helll ya clouds g 🔥😮‍💨🫡🥴🥴🦾

[@MoOiAmATree]

💨💨💨💨💨💨💨💨💨

[@pbtrading]

I'm gonna screw the screwball's plan of screwing ball vape balls by filling the anti ball ball vape with balls and disrupt the multiverse.

[@MoOiAmATree]

This is funny !

[@raymondw6164]

Is there a bowl reducer for this?

[@MoOiAmATree]

No :(

[@noxcorvus93]

Yes. You can set the screen within the bowl to half way notch. I hope that's what you mean!

[@bealight5141]

I hate when I have to dunk my wood in ISO

[@MoOiAmATree]

Dunk your wood in ISO

[@cheebacheeobusiness3893]

Same * different wrapping...

[@MoOiAmATree]

Ya basically ball vapes are all the hype I will say the screwball has some of the best airflow. Ready to see what people cook up after balls.

[@dsv3000]

bro you have to go below 390 F for real vape, if you run up your getting Benzene

[@MoOiAmATree]

Your Pid temp is not actually the temp you are vaping at it’s the temp of the coil is the pid number then cold air rushing over that drops the number down so by the time the flower vapes it’s a much lower temp.