A shortened version of the video we have at modelworld, explains basic rules, shows some example fights, and shows what is needed to build a basic antweight robot
Пікірлер: 54
@VestedUTuber9 жыл бұрын
Just to point out, in the US the weight limit for Ants is 1lb, or approx. 450g. UK ants count as fairyweights here.
@rycorobotics7473 жыл бұрын
I think you mean flea weights but I could be wrong
@VestedUTuber3 жыл бұрын
@@rycorobotics747 Nope, they're called fairyweights. Fleaweights is 75g.
@glowytheglowbug Жыл бұрын
that means technically i can make a lego bot
@VestedUTuber Жыл бұрын
@@glowytheglowbug There's actually a class specifically for that.
@JaedenSports6 жыл бұрын
Thanks for including the parts in the end!
@JaedenSports6 жыл бұрын
Nice!!!!! This is SO SO SO COOL!!!! I totally want to make one of these!
@ziskador5 жыл бұрын
It's mini robots fighting time
@StupidRobotFightingLeague7 жыл бұрын
this is awesome!
@kojofrimpong179710 жыл бұрын
Cool, I'm making a Antweight robot
@HazHills11 жыл бұрын
the 4 inch cube means that you can have a robot being about 5" long if you really squeeze it in. Large servos can be used for speed control, you remove the potentiometer and replace it with some resistors. More information on this can be found on the robotwars101 forum.
@VestedUTuber Жыл бұрын
That was good advice for the time, but I wouldn't recommend doing that now, proper motors and ESCs are really easy to get these days.
@Moeisabeast1211 жыл бұрын
LOVE the video. Ive never made one, but am about to, two things, do all of those seriously fit in a 4x4 cube?? they look so big. Also, how do you use a servo board for a speed control? i have LOTS of servos.
@nhtheintrovert56796 жыл бұрын
i would really like to do this, but idk if there is any in NH
@IDontExistAnymore894328 жыл бұрын
is it possible for u to sell some of those robots? not the spinning wheel of death ones though
@jrrobotics3 жыл бұрын
The thumbnail = 2:50
@darraghhamilton16357 жыл бұрын
what would be the typical RPM of a spinner type of antweight robot?
@dckidz52177 жыл бұрын
darragh hamilton 17000 (seriously)
@lythamfacey53079 жыл бұрын
which type of servo control boards can you use.
@jamesaylward66549 жыл бұрын
look on our forum.. theres load of info there... www.robotwars101.org/forum/
@robertmoreno28937 жыл бұрын
2:12 unlike splinter even without his own shell I'm still suprirsed that is still mobile.
@flames15926 жыл бұрын
Was there a prize for the winner
@BiceyIcey5 жыл бұрын
would you be allowed to run a antweight off of an micro-controller such as an aurduino that's connect to a phone through wifi or Bluetooth to reduce costs a little
@markxr15 жыл бұрын
Yes that's totally ok and a few people do it.
@TutocarloCV6 жыл бұрын
nice
@cameronbert23605 жыл бұрын
What type of drive motor should I use on my Antweight and what RPM should it be? I want to build on but am lost on what to use...
@bldjln31584 жыл бұрын
Buy a kit for your first robot and learn off of it. To answer your question I need to know your wheel diameter. I use 250rpm motors with 3” wheels, this is slower than many other robots but I like slower speeds for my driving style.
@sethanderson84008 жыл бұрын
make a vid explaining how to build one
@jrrobotics3 жыл бұрын
Why does everyone always ask that You should understand how hard those videos are to make
@yashaswikulshreshtha15884 жыл бұрын
Cute little mini bots....!!
@glowytheglowbug Жыл бұрын
NICEEE
@zachnave91849 жыл бұрын
where do you by the wheels
@PadreigEire7 жыл бұрын
You can try some electronic stores like Maplin.
@riteshgupta60778 жыл бұрын
what weapons are best in 5 kg of robot
@rycorobotics7473 жыл бұрын
It depends on what your wanting a bot to do
@riteshgupta60773 жыл бұрын
@@rycorobotics747 thankyou for the quick response really appreciable 😂
@grumpygrizzlybear8 жыл бұрын
How much weight is an antweight in pounds?
@thermidorii54417 жыл бұрын
In the UK, antweights are 150 grams. In the US, they are 1 pound.
@proplaz79153 жыл бұрын
Thats Cheap!
@Jammyhero9 жыл бұрын
Is antweight still going in 2015
@aqib20009 жыл бұрын
+James Law Good question, as I'm up for it
@AntweightRobots9 жыл бұрын
+aqib2000 sorry missed the original comment, but yeah they're very much still around, check out robotwars101(dot)org/forum for info!
@Jammyhero9 жыл бұрын
+AntweightRobots thanks!
@tommcglone28676 жыл бұрын
AntweightRobots. I think my antweight which is in the latter design stages may be the first 6wd antweight. I think my potential entry may be one of the most powerful pushers ever seen being 6wd and all.
@Pocketfarmer18 жыл бұрын
Are they remote or autonomous
@bldjln31586 жыл бұрын
You spoopid
@bldjln31586 жыл бұрын
Pocketfarmer1 jk
@teeman92665 жыл бұрын
2:49 Minotaur'd
@xtrasparx_lxix22367 жыл бұрын
To make a battlebot not as good as these but just get a RC car and armor it up and put weapons on and boooooom u got a battlebot
@tsubonk36997 жыл бұрын
no. a Battlebot that cant do a 0 degree turn will get fucked over by anything.
@kira076 жыл бұрын
buying is not an option, its about learing to build..
@tommcglone28676 жыл бұрын
Kira. Exactly. Im planning first for the antweight division. My first combat robot will be a 6wd pusherbot. Yes a 6 wheel drive antweight.