Unbricking Samsung Gear S3 SM R765A for free

Unbricking Samsung Gear S3 SM R765A for free
Download link:
electrovo.com/unbricking-sams...
Putting your phone into download mode:
Turn off your Samsung Gear
Press and hold the Power key until REBOOTING displays at the bottom of the screen.
Press the Power key repeatedly until the Select REBOOT MODE screen displays.
Press the Power key to highlight ‘ Download mode’.
Connect the USB cable to the computer and use Odin to flash the firmware files.
GUIDE TO CONNECTING A SAMSUNG GEAR S2 AND S3 DEVICE USING WI-FI AND USB
electrovo.com/guide-to-connec...
RECOMMENDATIONS:
If your watch “download wireless Mode” doesn’t work so you will need to connect your watch with “Download mode”
The “download mode” will require a wired connection so you will need to solder some wires according to this LINK for Samsung Gear S2 and this LINK for Samsung gear S3
Contact:
[e-mail]
Skype: habib.anwari
Paypal link:
www.paypal.me/electrovo
Visit our Blog:
electrovo.com
/ anwarigroup
Twitter:
/ abdul_habib_7
Facebook page:
/ electrovofunpage

[@nicholasrosa8952]

This guy is a hero!

[@aequitasveritas3419]

How can a do this if watches doesn't turn on and loading screen doesn't pop up, and they doesn't react on buttons at all? can someone help plz?

[@dnl1210]

y para conectarlo a Odin tuvo que abrirlo?, alli esta la opcion de download wireless, no se abre ni el reloj y se puede hacer eso mas facil.

[@piotrwojna1590]

All sensors in my Samsung stopped working, restarting and new software does not help

[@cedricvalentinpiehl2684]

Where to connect the wires if i want to try the ouside contacts, the golden ones?

[@davidewing5605]

Good is good. Fantastic is Fantastic, and that is what you are. Dave in Sierra Vista AZ

[@djdaddy8080]

Hello from Hereford

[@francisramires9498]

Hola tengo un reloj R845F quiero el pinout para hacer la conexión usb para pasarle el software por mi laptop Ya que intente cambiar el csc y se quedó en download no se puede pasar por wifi por qué no se activa quiero saber donde ves que van los puntos de conexión para soldarlo

[@tgremstgrems9544]

Please help me. The back of my gear s3 is broken. I can't see the watch model and the watch is on reactivation lock ON. I want to know the model number so I can download it. How can I get to know the model now

[@mattmorrisey5621]

Most excellent tutorial. One thing is to use odin and not netodin if that isn't 100% obvious

[@abade0960a]

Bro, can you do a power button fix on s3 frontier 😅. My watch charges just fine but power button doesn’t seem to be working

[@ahmedwalied9649]

I have same issue with galaxy watch active 2 but I have 6 pin and I can't take the back from watch

[@alanlopez309]

anybody knows why my device doesn't appear in the ID COM? I already realized all the steps

[@deondelange2370]

where can i download the Firmware files for my SM-R732 for free

[@mustafaelshamy2353]

I checked links But didn't find any content neither odin nor firmware

[@desmadrem3]

Sirve para R760?

[@johnmelvinesguerra6061]

hey is the soldering technique be used in s3 frontier Sm R760?

[@anwarigroup]

Yes

[@brenopacheco81]

How i do this in the Galaxy watch active

[@anwarigroup]

Procedures are the same. But files are not the same.

[@tamimi010]

hello frind. pls i need the softwear file how can i got it. ? thanks

[@anwarigroup]

Follow links on descriptions

[@evangelistaivanlopez601]

Hello ,where kan i get the SM-765A file ?

[@anwarigroup]

Follow the link in description

[@policearebusted7459]

Can i only connect the green and white wires, my watch has enough battery Also sometimes my computer says that the last usb connected malfunctioned and cannot be recognized

[@anwarigroup]

1- Check wires are ok 2- try to connect all 4 wires, 3- you can try with two wires, and see if it works or not.

[@policearebusted7459]

@@anwarigroup bro I tried everything, my computer keeps saying that the last device malfunctioned and cannot be recognized

[@policearebusted7459]

I downloaded the drivers for samsung gear s3, but it says device descriptor request failed in control panel, I used another USB cable but it still don't work

[@anwarigroup]

@@policearebusted7459 double-check the wiring diagram and pinouts. And the Samsung drivers, check with another computer. Check the cable continuity by a multimeters, double check the soldering.

[@policearebusted7459]

@@anwarigroup yo it worked man, I used a different wire and it worked, my watch is now alive again, THANKS SO MUCH , your a life saver

[@tgremstgrems9544]

Please where should i placed the wires?

[@anwarigroup]

See the video.

[@zorbega00]

not file

[@brunotavares4437]

friend, can I use these same files for the Frontier SM-R760?

[@anwarigroup]

Each watch has its own firmware and combination file, therefor these files can not be used for other watch.

[@francisramires9498]

Hola tengo un reloj R845F quiero el pinout para hacer la conexión usb para pasarle el software por mi laptop Ya que intente cambiar el csc y se quedó en download no se puede pasar por wifi por qué no se activa quiero saber donde ves que van los puntos de conexión para soldarlo

[@viralesparaguay]

Es la solución que yo necesito..pero yo no podría hacerlo :(

[@policearebusted7459]

Can I use tape instead of soldering

[@anwarigroup]

You can try, if the tape holds the wire on the contact, then yes, But this is not recommended.

[@policearebusted7459]

@@anwarigroup did you use odin or netodin

[@hadifaour8491]

Where to find the firmware

[@anwarigroup]

Visit the link on the description of this video

[@carmelotreviso]

My classic went to shit in less than 3 years and my active 2 is going back right now for the second time and it's less than a year old. Probably my last samsung watch. All garbage.

[@eisenheim1987]

Hi friend, I'm trying to fix my watch by following one of your videos and what you posted on your blog, but this happens when I try to charge it with the wireless charger and when I connect it via USB kzbin.infoa-BJx6vO5a4

[@anwarigroup]

Hi, look like software problem. Can you put your watch into download mode? Can you go to boot menu?

[@eisenheim1987]

@@anwarigroup Hello, it's not a software problem. I can't get to any menu because nothing loads today. I carried out the last tests today and ended up ruling out that the problem is the motherboard, since the power circuit from the battery is not working, so nothing loads

[@anwarigroup]

@@eisenheim1987 charge the battery manually. Then try to go to boot menu by the side keys, Check if the keys are working fine.

[@eisenheim1987]

@@anwarigroup Hello, I did charge the battery manually with my power source until it was full. I checked the buttons and the connections reach the motherboard. I also tested the operation of the buttons with my multimeter and it worked fine. and the clock does not turn on, this behavior happens when it has the battery or not. The last test I did was feeding the board with 4v4 directly from my power supply and it still doesn't turn on

[@francisramires9498]

Hola tengo un reloj R845F quiero el pinout para hacer la conexión usb para pasarle el software por mi laptop Ya que intente cambiar el csc y se quedó en download no se puede pasar por wifi por qué no se activa quiero saber donde ves que van los puntos de conexión para soldarlo

[@anwarigroup]

Hola, Abre el reloj, y envíame una fotografía.

[@francisramires9498]

@@anwarigroup te envíe la foto por correo