Anycubic Photon Mono M7 Pro: Revealing Every Nuance in 14K!

Click for details:
www.anycubic.c...
Superior Resolution: A 10.1-inch 14K mono LCD offers a resolution up to 13312x5120. Achieve an XY pixel of 16.8*24.8μm. Minimum post diameter of 0.15mm. Minimum hole diameter of 0.3mm.
Powered by the All-New 14K Optical Sources System LighTurbo 3.0, ensuring that every light ray perfectly captures your creativity.
Precision in Every Ray of Light: With a COB light source and Fresnel lenses, it eliminates stray light, ensuring a smooth model surface.
Intelligent Light Control: Equipped with the Light Uniformity Intelligent Algorithm, it guarantees light uniformity of over 90%. This smart tech dynamically adjusts the light-off delay time, boosting your printing success rate.
Expansive Creative Space: With a build volume of 223x126x230 mm.
Break free from the resin types constraints and speed up your printing without losing precision. Embrace the Pro attitude! ✨
Check out our impressive stats under standard 0.1mm layer thickness tests:
⏱ With Standard Resin: Zoom up to 130mm/h, with a layer printing in just 2.69 seconds.
🏁 With High-Speed Resin: Blast off at speeds up to 170mm/h, with an incredibly layer print time of only 2.11 seconds.
#Anycubic #3D #3DPrinting #3DPrinter #PhotonMonoM7Pro #AnycubicPhotonMonoM7Pro #Resin

[@felixmania1991]

Please make a video about how to clean the resin tank

[@ANYCUBIC3D]

That's a gret idea! We will make a relevant video in the future. First, you can pour any excess resin back into the resin bottle, ensuring there are no residues left behind. Secondly, pour a small amount of alcohol into the resin vat and wait for a moment before wiping it clean.

[@TheSuperjort]

Internal heater?

[@nestote7708]

¿Wifi option?

[@rsilvers129]

How many microns per pixel?

[@miguellopez3392]

I think the rectangular pixles are 17x23.5 um

[@emmanueltancongco1508]

wow

[@BemmyB]

Will this Printer blast my Ears away? 😅 My Mono X is sooooo loud. The Fans Sound is so loud

[@christinegrimm7315]

ich finde ihn sehr laut

[@grovvy1960]

Hallo ,nun Dieser Drucker is echt ANSTRENGEND von 20 versuchen nur 2 X was geworden ,Meldung im Bad seien Rückstände ,Neuer Folie eingebaut ,überraschung der gleiche Fehler,normal?? auch Teilweise Druck . Mein mono x 2K und 4 K hatten KEINE Probleme beim Druck ,Dieser is wohl sehr Empfindlich . Das einzige was wirklich GUT funktioniert is die Absaugung und Befüllung des Druckgbehälters. Bin echt enttäuscht .Was kann ich tun ?? bin echt am übelegen das Ding wieder los zu werden und den 4K weiter zu benutzen .

[@ANYCUBIC3D]

Hello, thank you for your feedback. The initial conclusion is that the printing platform is deformed. We recommend that you try to re-level and calibrate the printing platform to see if this can solve the problem: wiki.anycubic.com/en/resin-3d-printer/photon-mono-m7-pro/manual-leveling

[@christinegrimm7315]

@@ANYCUBIC3D I did the re-level , now I get the error message : Druckfehler. Zerebralkraft null

[@andreyzozoulya1274]

Вау!