Aoshima 1/12 YAMAHA SR400 tracker

Aoshima 1/12 YAMAHA SR400 tracker
#aoshima #sr400 #motorcyclemodel
*Index
0:00 Prologue
01:01 Wheel
04:44 chain, tensioner
07:24 engine
12:56 frame
15:31 Break, Fender and stop-lamp
16:52 Front suspension and handlebar
18:34 Exhaust
19:38 Foot-break and Kick-stand
20:58 Fuel tank and seat
25:09 Complete photo
Aoshima 1/12 YAMAHA SR400 tracker
About Aoshima Yamaha SR400
My impression of the kit is that it is well made, but just an ordinary kit.
This kit comes with custom parts that can be changed to a tracker type.
Initially, I shortened the travel of the front fork and used separate handlebars to make it look like a cafe racer, but I was worried that using tracker-type parts would ruin the style.
I tried remaking it into a tracker type based on a DEUS custom motorcycle I found on the internet.
The SR400 has its roots in the XT500, so it doesn't feel out of place as an off-road type.
Anyway, the completeness of the SR400's design is amazing.
point of making
(1) Change of handlebar size and shape
(2) Increased front fork travel
(3) Miniaturization of fuel tank (layering of plastic plates)
(4) Single sheet (modeled with putty)
engine and frame
The details of the oil piping, addition of coils, decompression arm, and clutch cable have been improved.
The part where the air filter and battery go is hollow, but I made a bib plate out of aluminum to give it a little more atmosphere.
fuel tank
The genuine parts were too big and the custom parts looked chopper-like, so I made them by layering plastic plates and putty.
It is more accurate and easier to make symmetrical objects by laminating plastic plates than by modeling them with putty.
I pasted the DEUS logo on the fuel tank.
exhaust
Tracker type motorcycle exhausts are often short and compact, but this kit came with a short muffler, so I used that.
Also, since the SR exhaust is thick, I wrapped it in cloth tape to make it look like a thermo bandage.
Replacing spokes
Uses 0.4mm stainless steel spring wire and 0.4mm electric wire sheathing.
The outer diameter of the wire coating is 0.62 mm and 0.7 mm, so it can be made 0.1 mm thinner than metal pipes.
However, since it does not come in silver or gold, it will need to be painted.
stage
I used the garage I made before.
If you build a garage, it will be fun to play alone, so if you're a motorcycle model fan and have the time, energy, stamina, and perseverance, please make one!
Next, I'm thinking of building a Honda motocross motorcycle!
P.S.
The Honda Dream 50 that was up for auction was sold to an overseas person.
Thank you so much!

[@OzScalemodeling]

Amazing build wow, excellent work... Cheers

[@scalemodeler]

Thank you so much!!!!!

[@BLECHHAUS]

Very nice made. Like those details like the numberplate mounted with wire :-)

[@scalemodeler]

Thank you so much❣️I found many motorcycles with bib plates attached using strings or wires.

[@BLECHHAUS]

@@scalemodeler It's exactly these little details that make it look realistic.

[@scalemodeler]

@@BLECHHAUS I strive to create custom motorcycles that everyone can ride. Custom motorcycles from all over the world are my textbook. thank you!

[@hishamabdullah1987]

master of details

[@scalemodeler]

Thank you ❣️

[@johnneild3914]

Hi from the UK brilliant build im going to do a similar one after seeing yours

[@scalemodeler]

That makes me very happy! If you have any questions, please feel free to ask!

[@GiorgioBeltrammi]

Molto ben fatto!

[@scalemodeler]

Grazie, sono molto felice

[@openexhaustmodels5139]

Brilliant 👍

[@scalemodeler]

Thank you❣️

[@soulice933]

look like real bike.... damn your custom is another level !!

[@scalemodeler]

Really thank you so much❣️❣️

[@richardsmith6738]

Just found your channel and I must say I'm blown away by the quality of your work.Amazing and thankyou

[@scalemodeler]

Thank you very much for your kind comment! I will continue to create good works!

[@hernanyepes4726]

Impecable , cada uno mejor que el anterior . Por favor sigue compartiendo estas obras de arte

[@scalemodeler]

¡gracias! Tus comentarios me alientan mucho. Seguiré creando obras maravillosas.

[@sukeyu2136]

ミナミモーターサイクルのSR400の製作動画を見た後にこの動画を見てもプラモデルとは思えない「ビルダーの動画」を見た満足感がある‥

[@scalemodeler]

ミナミモーターのサイトを見ました。 模型を作る時は色々なビルダーさんや、世界中のオートバイの写真を参照しているのですが、ミナミモーターサイクルさんのサイトも追加しました。 ありがとうございます！

[@granpaaucarre7914]

Magnifique travail une fois de plus, l'atelier est superbe

[@scalemodeler]

merci! Vos commentaires me motiveront pour mon prochain travail !

[@marsgarage8217]

Impressive work as always friend.

[@scalemodeler]

Always thank for watching my video and comments ❣️❣️ From your Japanese friend 😊

[@laurentbouveyron5362]

elle et superbe 👍

[@scalemodeler]

merci. Merci de toujours commenter.

[@jackycherieth4634]

Magnifique

[@scalemodeler]

Thank you so much❣️❣️

[@alexgrupp4211]

Amazing

[@scalemodeler]

Thank you!!

[@tieudinhtrung]

Imazing

[@scalemodeler]

Thank you❣️❣️

[@goforitpainting]

100% Professional

[@scalemodeler]

Thank you very much!

[@mariomendo1483]

Onchi gong kangs hitomake't

[@scalemodeler]

really sorry. I don't understand your language. thank you very much!

[@leroymitch3153]

when do we get to see you new masterpiece

[@scalemodeler]

This week new Moto upload on KZbin 😊😊😊😊 Now making video 🙌

[@tcandle695]

Beautiful bike👍 Do you have pictures of your models in Instagram or Pinterest? Thanks.

[@scalemodeler]

Thank you for your comment. I'll be creating a dedicated gallery on Pinterest soon. Thank you for your understanding at that time.

[@1128sumiyoshi]

真鍮パイプをつぶさずに綺麗に曲げる方法を教えてください。以前にも完全に丸く曲げていた作例があったと思います。おそらく事前に焼きなましをしてからの加工だと思いますが、中に芯材等を入れているのでしょうか？又、どのような工具を使われているのでしょうか？教えていただければ幸いです。

[@scalemodeler]

0.4mmなどの太い真鍮パイプは中に心材入れて、ワイヤーループ、丸ペンチ、ワイヤールーピングペンチ、呼称は色々なんですけど、アクセサリーで使うペンチを使っています。 心材も曲げる角度では抜けなくなったりしますので、その場合、曲げる箇所のみに芯材を短く切って入れて曲げています。 手間かかりますけど、熱することはしていないです。 パイプは材料が長ければ曲げやすく、短いほど曲げにくいので、ある程度の無駄な端材は生まれてしまいますが、曲げ加工は高等なテクニックだと思っていますので、綺麗に曲げられるとちょっと家族に自慢出来ますよ😉

[@1128sumiyoshi]

早速の回答ありがとうございます。いつも丁寧に回答していただきありがたいと思っています。アクセサリーで使うペンチといえば、両刃が円錐形のあのペンチですかね。いずれにせよ HARP 社製等の宝飾に使うペンチを探してみます。ありがとうございました。@@scalemodeler