Aoshima LBWK Lamborghini Huracán 1/24 Scale Model Build

[@life4072]

まだ、40代初心者の者です。 高校生の頃にプラモデルを作っていたのを思い出して、最近何となくプラモデルでも作ろうかなぁ、と思いKZbinで検索したところこの動画が出てきて、何となく見始めました。正直、この動画を見て心が震えました。 通常速度で再生して最後まで見切って、再度、見直しました。何でパテを表面に手間をかけて塗っているんだろうかとか、ボディの裏面にもパテを盛って色を塗っているのかとか最初分かりませんでしたが最後の方で理解できました。出来上がった作品は、見る人の想像力を激しく掻き立ててくれる、もはや芸術品です。 この動画を見て、私もプラモデルをまた作って見ようと思いました。 素晴らしいきっかけを作って頂きありがとうございます。全部の動画、拝見致しました。何度も見直しました。自分もこんなにうまくなれたら良いなと思いました。 是非、これからも動画をアップしていってください。楽しみにして、技を見習って行きます。

[@mokeipaint]

ありがとうございます。私は大変嬉しく思います。 一人でも多くの方にプラモデルを作ってほしいと願い、このチャンネルを始めました。 現在の日本では技術者が減少しています。1980年代 MADE IN JAPANが絶賛され世界中の人々はこぞってMADE IN JAPANを買いました。なぜでしょうか? 理由は簡単でMADE IN JAPANには日本人の魂が入っていたからです。 魂の入った商品や作品は必ず人の心を動かします。シンプルLIFEさんならできると思います。 最初は上手くいかないかもしれませんが時間がかかっても良いので楽しく作って下さい! 上から目線の様な返信になってしまいすいません。本当にありがとうございます。

[@life4072]

いえいえ、お忙しい中ご丁寧に返信頂きましてありがとうございます。とても嬉しいです。 上からだなんてとんでもありません。 後押し頂いているようなお言葉ありがとうございます。 早速、アマゾンでアオシマのランボルギーニを購入致しました。少しづつしか進めないですが、MOKEI PAINTさんのように人の心を動かせるような作品を作れるよう始めていきたいと思います。

[@kei-wc3rb]

お疲れ様です。 私は60歳で模型歴は50年以上かな・・・ 自分とは全然違う取り組み方をしてる人の仕事を見るのは モチベーションが上がります。 有難うございます。

[@mokeipaint]

お疲れ様です。 keiさんの様な模型歴50年以上の方から、このようなコメントを頂けたことを大変嬉しく思います。 私もモチベーションが上がります。 私はもう少しで50歳です。先輩であられるkeiさんの模型ライフが、ますますより良いものでありますように願っています。 本当にありがとうございます。

[@FlashNeon_Gaming]

こんにちは、私はあなたのビデオを長い間見てきました。あなたのスキルは素晴らしいと言いたいだけです、これほど熟練した人を見たことがありません、私は将来に満足しています、そしてまだ見ています！

[@mokeipaint]

ありがとうございます。喜んでもらえて嬉しいです。今後も貴方に満足して頂ける動画を投稿します😀

[@r-02]

ここまで精細に作り込む人、見たことない。 半端じゃない…

[@mokeipaint]

ありがとうございます😀

[@fabulous1123]

作品の素晴らしさはもちろんですが、BGMなどのない作業音のみの動画も見ていてとても心地よく、いつも時間があっという間に過ぎてしまうほど見入ってしまいます。 まさに職人ですね。 これからも素晴らしい作品と動画を楽しみにしています。

[@mokeipaint]

ありがとうございます。喜んでもらえて嬉しいです。 最初は迷いましたがBGMなしにして良かったです。今後もfabulous1123 さんに喜んでもらえる動画を投稿しますので楽しみにしていてください!

[@MrAhly5056]

一瞬、実車かと思った…。凄い。

[@mokeipaint]

ありがとうございます。喜んでもらえて嬉しいです😀

[@west9323]

本物いてくさw

[@user-omakeplus]

だとしたら、右奥の観葉植物がメッチャどデカイことになるなw。

[@MrAhly5056]

@@user-omakeplus 観葉植物は抜きにして言ってるのさw

[@freemotojeffp]

実車かと思いましたよ私も！ 凄い！

[@acdc0112]

ミラタリーやフィギュア等、他のジャンルも拝見してますが、それぞれすごい技術とセンス。 滑らかで濡れた様な光沢と重量感で一瞬本物に見えました。見てるだけで楽しいです。

[@mokeipaint]

ありがとうございます。喜んで頂いて嬉しいです😀

[@144wychwood]

I'll never tire of watching these model builds. The level of attention to detail is extraordinary.

[@mokeipaint]

Thank you😀

[@جبريلمحمد-ه6ع]

​@@mokeipaintو

[@jaym1244]

I have been building and watching videos on scale model cars for years and I have never seen the level of detail like you put into yours. You are on a whole another level! Amazing work, thank you for sharing!

[@mokeipaint]

Thank you. I'm happy😀

[@AI.art.Tiz001]

驚いた...実車かと思いきやまさかの模型とは...技術が凄過ぎです。

[@mokeipaint]

ありがとうございます。喜んで頂いて嬉しいです😀

[@Peculiar_Killer_Whale-DC2]

これはスゴイですね。次元が違い過ぎる。 特にボディーを整形してしまうヤスリがけのセンスは圧巻ですね。

[@mokeipaint]

ありがとうございます。キットを購入した時にはこんなにパテが必要だとは思いませんでした😀

[@Peculiar_Killer_Whale-DC2]

いきなりやって出来るものではないスキルと思いますので，普段から経験積んでいらっしゃるとは思いますが， プレスライン潰さないようにペーパーがけするので精一杯な私にとっては， 「スゴイ」しか出てこないくらいの技術です。 今後の作品も楽しみにしております＆いいなと思った方法は自分で作っている物にも取り入れてみようと思います。 ご返信ありがとうございました。

[@t.k7714]

真似出来るとこがないか 参考になるところがないか　未だに何度も見させてもらってます。　この動画を参考にして 少しでも　スキルアップ目指して　プラモデル 頑張ります。

[@mokeipaint]

ありがとうございます。プロモデラーPOOH熊谷さんも言っている様にプラモデルはコツさえ分かれば簡単です。T.Kさんもできる様になるので頑張ってください。応援しています😀

[@E3lcpl]

Watching your videos made me want to get back into building models, so i just bought a bunch of tools and a model , now i just need to build a paint booth and get all my air brushes and other modeling tools i have in storage out.

[@mokeipaint]

Thank you. I am glad that you are getting back into model building. I hope you will build a good work of it.

[@cococalm]

For those of us wanting to take our skill to this level, it would be very useful for us if you could show us what you used as a reference for the major putty work on the car body during this build. The references for the reinforcing would aslo be useful. These comparisons will help us understand what is going on. By you showing us how you came to these conclusions, we get to improve our abilities in building models like the one we see in this video. Afterall, most of us are not motorcar panel-beaters nor mechanics. Thank you for sharing.

[@mokeipaint]

Thank you. I will consider making more videos in the future, including more tools, to meet your requests. In fact, I sometimes get the same comments as you from viewers. I will make videos that will make you happy😀

[@bquattrog]

Stunning! Amazing work, I’ve never seen this level of detail before.

[@mokeipaint]

Thank you. I am happy that you are pleased with me.

[@alexoda8489]

カッコいい！✨ 参考になりました アオシマのクオリティーを遥かに超えて、これこそ真のプロ級モデラーの製作ですね🤩

[@mokeipaint]

ありがとうございます。また、リバティーウォーク作りたいですね😀

[@Nomadfilms_]

genuinely thought this was a real car when I clicked the thumbnail. GREAT WORK!!!!

[@mokeipaint]

thank you. I am happy that you are pleased with me😀

[@ゆうた-x1y]

サイドミラー貼ったところでこの人やばいと思った。ここまで抜かりないのそうそう居ないよ！最高！！

[@mokeipaint]

ありがとうございます。喜んで頂いて嬉しいです😀

[@堺浩章]

凄い…アオシマ から表彰してもらいましょう！マジで。バックミラーを張り変えてホッとしました🤣健康的に模活して下さいね😊

[@mokeipaint]

ありがとうございます。ミラーが最初から気になっていたので張り替えました😀

[@jeanfleurimond4551]

Mind-boggling man this is amazing the amount of skill you poured onto this craft is none the less amazing.

[@mokeipaint]

Thank you. I am very happy to be pleased with you😀

[@danielferreira8647]

Amazing body work and final result. I see that are some missing details (like the sticker for the dashboard) that are present in other brands at this scale, that enrich the models. Apart from that the final result is excelent. Great job, indeed!

[@hksjgkgokae]

素晴らしいです、ものすごくて言葉でません。塗装の質感へのこだわりがとても素晴らしいです。

[@mokeipaint]

ありがとうございます。気に入ってもらえてとても嬉しいです。

[@user-up7cd7dg6p]

素人の感想ですが、数ある車模型製作者の動画の中でもトップレベルの製作技術、完成度だと思います。赤ボディ塗装が続いていますのでピカピカのパールホワイト塗装等の作品も拝見させて頂きたいです。

[@mokeipaint]

ありがとうございます。喜んでもらえて嬉しいです。 私も赤が続いているので考えていました。次回はタミヤ マツダ ロードスターで、マツダプレミアムカラーのマシーングレーです。以前、製作中写真をyoutubeコミニティーに投稿していたキットです。 パールホワイトの似合うスポーツカーキットを考え中です。 私の勝手な考えですが、パールホワイトにはメッキ調ホイールにレッドブレーキキャリパーが似合うのではないかと思っています。

[@user-up7cd7dg6p]

@@mokeipaint ご返信ありがとうございます。塗装した各パーツを並べてスナップキットのように組み立てていくのが斬新で気持ちがいいですね。次はロードスターですか!?とても楽しみです。主さんの言われるとおり、パールホワイトにはメッキホイールに赤キャリパーですね。それならフジミのレクサス系キットがオススメです(笑)

[@mokeipaint]

ありがとうございます。おっしゃるとおりパールホワイトにはレクサスのイメージがあります。 次回は早めに投稿しますので楽しみにしていてください!

[@user-up7cd7dg6p]

@@mokeipaint はい、ありがとうございます。

[@東太ジョー]

私も同感です。 完成度がハンパですね 感動してます。

[@weok-doing-things]

This is a very high master work. So satisfying. The surfaces of the car developed awesome. And carbon breaks was a nice touch haha

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@joemoore4027]

I have the same kit. After seeing your build I think I'll leave my kit in my stash. Beautiful build !

[@mokeipaint]

Thank you. I'm happy. I'd love for you to build this kit. This kit is cool!

[@gregkrueger331]

Your level of precision and detail is definitely on display here. Very impressive work, please keep them coming.👍

[@mokeipaint]

Thank you. I am happy that you are pleased with me. I will continue to post videos that will make you happy.😀

[@WD1271]

I thought I had already seen next level model making on youtube until I saw this video. You completely resurfaced the outer shell... I mean... enough said really. Oustanding.

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@itsmintano]

that body work looks like a real car body work! nice build!

[@1axel587]

おすすめに出てきたから何気に見たら最後まで見入ってしまった お見事

[@mokeipaint]

ありがとうございます。嬉しいです😀

[@rinirax]

Amazing. Your hands are steady like a surgeon. I hope you keep making beautiful videos and car models like this. Maybe one day you can even hold an exhibition at the museum 😎

[@mokeipaint]

Thank you. I am happy that you are pleased with me. I hope that someday I will be able to exhibit at an art museum😀

[@gcucu75]

I want to compliment you for the exceptional attention to detail. Thanks from Italy.

[@mokeipaint]

Gracias. Estoy feliz de que estés satisfecho conmigo.

[@じゆん参]

アオシマ アニメキャラクター、カーモデル、ジェット機モデルまで ここまで来たかと思いました 見かけたら 即買います。

[@mokeipaint]

ありがとうございます。是非作って見て下さい!

[@じゆん参]

@@mokeipaint さん ボクからも ありがとうございます 頑張って探します (*≧∀≦)ＯＯ(≧∀≦*)♪(グータッチ)

[@V1KTOR33]

Watching you work makes me Feel like I’m dishonoring the models I work on.. very inspirational and I will strive for a higher level from here out.. wow.

[@mokeipaint]

Thank you. I hope you build good works😀

[@tsumu-rider706]

マスキングテープ外すところ見ていて気持ちいい😊

[@mokeipaint]

ありがとうございます。マステ剥がすのはワクワクドキドキします😀

[@IamAlpharius186]

What is the yellow and white mixture that you cover the car in and then sand? Is it some sort of two part epoxy to cover up bad details?

[@TrevHenny]

It's Tamiya polyester putty.

[@reifuji3623]

細かいトコロまで。。。繊細過ぎる〜、実車以上かも🤩🤣😆

[@mokeipaint]

ありがとうございます😀

[@EmptyPocketsXotics]

Amazing work! Very jealous of your skills. Also, I have two questions: 1. Why all the taping off different body parts when filling/bondoing if you're just going to spill off onto the next edge or body part and bondo that as well? 2. Why pick pieces up with wooden tongs if you are just going use your fingers mostly to glue them together? Thank you!

[@mokeipaint]

Thank you. I am glad that you are pleased. 1 This is to get the line accurately. 2 This is because my hands get in the way and the parts do not appear in the camera. Thank you😀

[@kazu4236]

コレ見てから寝るようにさせてもらってます😊

[@mokeipaint]

ありがとうございます😀

[@c1run1]

Wow stunning ! I didn't think they needed so much body work. The extra effort make it a cut above the rest .

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@warugkai-cf]

もはや板金塗装レベルの修正 恐ろしい技術です。凄い👍

[@mokeipaint]

ありがとうございます。喜んで頂けて嬉しいです😀

[@kashiramoji.A]

ピラーの裏までパテを入れる人は初めて見ました(笑) こんな作り方も有るのか？と驚きました。 私も50歳です。

[@mokeipaint]

ありがとうございます。ピラーの内側を作ると重量感が出ます😀

[@Angelcry999]

凄過ぎる！ これってスナップフィットじゃないですよね？　接着剤処理も完璧過ぎる！

[@mokeipaint]

ありがとうございます。一部スナップフィットですが接着剤を付ける部分も位置がズレないように工夫されています。初心者の方も作りやすいキットです。

[@ScaleModelExperiment]

Suggoi suggoi Mokei-San. I love all of the extra work you did to make the toy into a replica of the real car. I learn so much from you with every video you make. I cannot wait for the next project! ~James

[@mokeipaint]

Thank you James. I am happy to be of service to you. I will post my next video as soon as possible.

[@ModelToys88]

The video is really great and engaging. Thank you to the channel owner for sharing

[@OzScalemodeling]

You must work in a laboratory to keep dust away, only reason I can never build vehicles is because of dust. Stunning work !

[@mokeipaint]

Thank you. I am having a hard time with dust. I do air blow but dust falls during shooting. I check the lamps and interior for dust. If there is dust inside I assemble it.

[@Alex-tm4th]

I started my first model today. I’ve never quit a hobby so fast after seeing this. 😂😂😂 Great video man. Hopefully I’ll be at that level at some point.

[@mokeipaint]

Thank you. Don't stop making models. Rest assured that you will improve while you are making the model😀👍

[@Alex-tm4th]

@@mokeipaint I was told today to pick one thing to focus on for improvement next time. Do that every time and eventually I will be professional. One model at a time. Thanks for sharing your work.

[@mokeipaint]

@@Alex-tm4th Thank you. I hope you can be professional😀

[@bladerunnerd15]

Amazing work! Could you please make a video about all your tools, where you got them from. Your glues, fillers and masking technics! Thankyou

[@mokeipaint]

Thank you. I am happy that you are pleased with me. I will try to show the tools in future videos😀

[@dm8264]

Wonderful! I think it would’ve looked better without the front license plate, but great attention to detail anyways!

[@mokeipaint]

Thank you. I am happy that you are pleased with me. The license plate can be removed!

[@428hermes8]

カッコよすぎる🤤 使用されてるウレタンクリアーとコンパウンドのメーカーがしりたいです🙏💦

[@mokeipaint]

ありがとうございます。 ウレタンクリアは関西ペイントとロックペイントを使っていますが模型用ウレタンクリアをおすすめします。 ウレタンクリアはラッカークリアに比べ硬い為、コンパウンドはウレタンクリア用を使用しています。ユニコン FMC 8000-LS 、8025-LS 、8040-LS です。ウレタンクリアを磨くにはタミヤコンパウンドなどの模型用コンパウンドでは時間がかかります。 仕上げはハセガワセラミックコンパウンドで磨き、コンパウンドのシリコンを落とす為に中性洗剤で洗います。

[@428hermes8]

返信ありがとうございます🙇‍♂️ 教えていただきありがとうございます😊 参考にさせていただきます🙇‍♂️

[@vladancovic6782]

Awesome job and video. If may ask what for glue u using for parts for final assembly, a also what kind of glue for clear parts? Thanks.

[@mokeipaint]

Thank you. I am glad that you are pleased. All adhesives, including clear parts, use water-based rubber adhesives. Since it does not melt the paint or plastic, it can be peeled off even if you make a mistake. I think Tamiya had released an adhesive for clear parts.

[@santaklaus2489]

MEGA NICE Build Bro. LIKE👍👉🔥

[@mokeipaint]

Thank you😀

[@jorgenakamura2043]

Amazing job! I was just wondering though...why do you apply black, then silver, then matt black, white+orange+yellow and finally body color to the chassis? Why apply black if you will paint it white? Thanks.

[@mokeipaint]

Thank you. The chassis molding color was gray. I applied the color based on the photo of the actual car. The material of the real car is different between semi-gloss black and matte black parts. The silver part is aluminum. White + orange + yellow is the color of undercoat material. The actual car is sprayed with sealer. The body color is applied to reproduce the body color adhered in the painting process of the production line.

[@92為替王]

動画見てこれ買いました、あそこまでやるんですね、、、 凄い

[@mokeipaint]

ありがとうございます。是非、良い作品に仕上げてくださいね😀👍

[@lucamicalicapparelli4825]

Hi, just great. Is all that putty on bodywork to correct mold defects? I would also like to know what brand of clearcoat 2K you use ... thank you!

[@mokeipaint]

Thank you. The putty is to correct the plastic distortion. Urethane clear is used with Kansai Paint and Rock Paint. These paints are for real cars. Urethane clear for models can be obtained at model stores and radio control stores.

[@slavomalic1896]

Perfect kenji... Make one sode of the lifter Black 😉... 🙏

[@ドンジョンソン-f9b]

全てにおいてセンス良すぎます。

[@mokeipaint]

ありがとうございます😀

[@FishEyedPaintWorx]

I am amazed by your putty work. I am curious how you know where to put the putty?

[@mokeipaint]

Thank you. As you can see in this video, I hit the light and put putty where the reflection is distorted.

[@FishEyedPaintWorx]

@@mokeipaint Ok great Thank You

[@GILSON300LBM]

Just amazing... parabéns 👏👏👏. Faz um 🦇 BATMOVEL🦇 um dia

[@mokeipaint]

Obrigado.😀

[@TechTalkTobi]

first look on the thumbnail: nice lambo ... ohh wait, huge plant in the background .. no wait ! ... this is a scaled model of the car on a desk ? .. holy - nice skill !

[@mokeipaint]

Thank you. That's right, it's a plastic model!

[@TechTalkTobi]

@@mokeipaint but it looks like i could drive it

[@mokeipaint]

@@TechTalkTobi Thank you. I am happy that you like it😀

[@惑星ガルガンチュア]

元々ガンプラ派だったけど、最近この手のスケールモデルにも興味が出始めてる。

[@Awlansee]

wow, the kits lowering and camber is so good! need more of this in kits!

[@mokeipaint]

Thank you. I think so too😀

[@dailyyy_]

What a hidden gem of a channel, defenitly subscribing

[@mokeipaint]

Thank you. I am happy that you are pleased with me. I will continue to post videos that will make you happy😀

[@michaelw6193]

Impressive and very meticulous 👍🏾👍🏾👍🏾

[@mokeipaint]

Thank you😀

[@jean-guylebreton5332]

Wow ,you’re a very patient man and with great abilities,super great job

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@トシボーdrive]

素晴らしい、最後迄観てしまいました😂

[@mokeipaint]

ありがとうございます😀

[@matthewfreeman6917]

incredible work. I have just bought my first model. is there a step by step guide to painting, to get such a perfect finish? thanks

[@mokeipaint]

Thank you. We don't have a step by step guide, but what we show in the video is all we have.

[@hhaste]

Great job! Trying to decide which Aoshima Lambo to get, I think it's going to be this one.

[@o_san_modelers]

質問です。 7:47 で使われているヤスリの当て板にしている物ってどこで手に入りますか？教えていただけると嬉しいです🙇‍♂️

[@mokeipaint]

ハイキューパーツ リタックスティックハーフ amzn.asia/d/2iaBJrU ポリカボネート製ですが、今年カーボン製の物も発売されています😀

[@o_san_modelers]

@@mokeipaint ありがとうございます。ずっと気になっていて、聞けて嬉しいです。

[@mokeipaint]

@@o_san_modelers 気軽に質問してくださいね😀

[@Rumble-is-better]

Staggering finish! 👍

[@mokeipaint]

Thank you😀

[@mrblujet]

That's a great job you did on that model. Congratulations.

[@mokeipaint]

Thank you. I am happy that you are pleased with me.

[@squeue]

This is illegal! Lamborghini might sue you for building a model which looks better than the original. Awesome work!

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@mabulblue]

前のマツダロードスターで初めて拝見しましたが、相変わらず素晴らしすぎる‼️ つか、塗装のさい下塗りや上塗りの色などのセレクトはプラモデルに特化したモノなのでしょうか？ 魅せるテクニックなので秘密？ まぁ、基本は実車と変わらないかも知れませんが、そこが気になって…🤔

[@mokeipaint]

ありがとうございます。秘密ではありませんがボディーカラーは調色が難しく一滴間違えただけで全く違う色になってしまう為に伝えるのが難しいのです。 私は調色の微調整を0.01%単位で4∼8色ほど使って調整しています。

[@TestUser-o2s]

Great work! Looks amazing. Could you tell what kind of red paint and clear lacquer you used for this car?

[@Kubafalkowski97]

This model look like was made to look like king cobra snake..the back top of it 😍 Amazing look and taste of style 👏👌

[@mokeipaint]

Thank you. The actual car was remodeled by Liberty Walk in Japan😀

[@isdalaga]

Que pasciencia 👍🏼👍🏼 ,exelentes trabajos y muchas felicidades desde México 🥇🥇

[@mokeipaint]

Gracias😀

[@edgeofreason2710]

Wish they made these 1:12.. Would go broke buying them.

[@jimmccauley9099]

Amazing work and finish. New to your channel.

[@bobwil9903]

Beautiful. How much psi did you use for the ps290 with the van cap?

[@mokeipaint]

Thank you. Air pressure is 0.15~0.3MPa. I am changing depending on the situation.

[@ejicon3099]

Beautiful work. Great attention to detail. Thanks for sharing.

[@mokeipaint]

thank you. I'm happy😀

[@rajaramsivasankar6864]

Awesome work as always! Love the custom touches with the bottom of the doorcards. How did you create the black beading effect on the joint between the body and the overfenders?

[@mokeipaint]

Thank you. The fender rivets are used as they are in the kit. It is brush painting. We recommend that you cut out the rivets, make holes, and use external parts. The fender molding is masked and painted with an airbrush.

[@rajaramsivasankar6864]

@@mokeipaint Awesome thank you for the information. I look forward to the next video!

[@mokeipaint]

Thank you. I will post the next video as soon as possible.

[@sajash6059]

Absolutely stunning build! Was looking forward to this for a long time.

[@mokeipaint]

Thank you. I am glad that you are pleased. I really kept you waiting. Next time, I will post the video as soon as possible.

[@danielkomaromi3835]

Very nice work! Hyper realistic! Great! 👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻

[@mokeipaint]

Thank you. I am happy that you are pleased with me😀

[@douggoins2960]

Amazing build. What wad that yellow stuff you applied? Like body filler for model cars? You are very talented, sir. Earned a subscriber. Also,the black stuff you sprayed on the floor panels. What is it called?

[@mokeipaint]

Thank you. The yellow stuff is putty. The things sprayed on the floor are Japanese painting pigments. You can get it at an art supply store.

[@robertdiaz9297]

You sir are amazing and those wheels and disc are the best I've ever seen. ❤️

[@robertdiaz9297]

My bad those mirrors are amazing

[@mokeipaint]

Thank you😀

[@alex02101967]

You are the putty magician !! Never seen something like this !!!

[@mokeipaint]

Thank you😀

[@Newedge03]

Great job and i was wondering what compressor you're using to keep up with that ps290s fan cap.

[@mokeipaint]

Thank you. I use Airtex APC006D air compressor. I have an additional air regulator (with an air filter) installed.

[@Newedge03]

Thanks

[@日番谷冬獅郎-m1x]

手間ひまがすごい👏

[@mokeipaint]

ありがとうございます😀

[@Dennisdoan2809]

What is the yellow compound that you put on the base body kit, what is the use of it?

[@johnnyskywalker]

Fantastic! Greetings from México City.

[@mokeipaint]

Thank you. Greetings from Japan

[@_QUALITY_]

I hope the next work is 'tamiya skyline gtr(r32)nismo custom'

[@mokeipaint]

Thank you. Currently I am working on the Tamiya Mazda Roadster. This is a roadster I posted to the KZbin community before. I have bought several kits to build next, but 32gtr is still under consideration.

[@victorree517]

Outstanding work...!! 🌟🌟🌟🌟🌟

[@mokeipaint]

thank you😀

[@toysforboysrc]

🏆This is why I started this channel.., to get young men involved and involved in cars.. hopefully they will pursue mechanics or autobody & paint. I never imagined I would of won a National award for autobody and paint but when you love what you do, people can see it in the work you do!🏆

[@mokeipaint]

🎉Congratulations. I think it's great that you won the award. I also started this channel because I want many people to make plastic models. Thank you😀

[@チカシナカノ]

クオリティ高い 実車に見える🎉

[@mokeipaint]

ありがとうございます😀

[@sweetsnoopy1212]

Really the best model. I am new to modeling, how many layers of clear paint are sprayed, will it wear through to the top paint when grinding and polishing? Can you give me some advice? Thank you (Subscribed to express thanks)

[@mokeipaint]

Thank you. I am glad that you are pleased. I use urethane clear, so I apply it 3 times. This time, I painted it from the top with the decal, so I painted it 5 times. When applying lacquer clear, increase it once or twice. Use # 1500 to # 3000 sandpaper for sharpening, but use # 3000 sandpaper for lacquer clear coating.

[@sweetsnoopy1212]

@@mokeipaint Thank you very much for your selfless sharing and detailed explanation. You are really a master.

[@mokeipaint]

Thank you😀

[@KarlScaleModeling]

Amazing work, really like the final outcome. One of the best LB Huracan I've seen. Well done 👍🏼👍🏼

[@mokeipaint]

Thank you. I am glad that you are pleased. I will continue to post videos that will please you😀

[@KarlScaleModeling]

@@mokeipaint Haha, looking forward to see more of your videos. This LB Huracan is simply amazing. I am looking to buy one because of you, I want one for myself :) haha, Aoshima should send you the commission for my purchase!!

[@mokeipaint]

Thank you. I think you can make a good Huracán. Please look forward to the next video!

[@kekeklol3705]

Really love how clean it looks you are sooo Cool keep doing

[@mokeipaint]

Thank you. I am glad that you are pleased.

[@kekeklol3705]

Thanks 😊

[@agbluemetal2364]

This makes me really want to get into model building but it looks too difficult and the kits are very rarely available in my country :(

[@mokeipaint]

Thank you. It's not difficult to make a plastic model, but it's a problem that you can't get it🤔

[@bricegt8438]

Very great job. It's beautifull

[@mokeipaint]

Thank you😀

[@ivanchan9064]

Nice work! May I know which brand you are using for semi gross black?

[@mokeipaint]

Thank you. Tamiya lacquer and Gaianotes. Tamiya semi-gloss black is a little whitish and Gaianotes semi-gloss black is quite black. Gaianotes may be difficult to obtain in countries other than Japan.

[@ivanchan9064]

@@mokeipaint thank you

[@miniadventureswithmark3309]

Nice paint job sir.😎

[@mokeipaint]

Thank you😀