AOVO PRO E SCOOTER - Solid to air tyre conversion upgrade!

Convert your aovo pro e scooter to air tyres for comfort and protect your scooter from the vibrations that come from solid tyres!

[@ThomasOsaki]

I finished this conversion today. the metal was softer than I expected and the drill went through fairly easily/accurately. just have to start out slow until you get enough metal drilled out to go all the way through. I was pleasantly surprised when going through the front wheel shell the wheel had a circle guide already there for you to drill through. the back was definitely easier than the front. tube tire is pretty easy to install if you have the tire tools and use your feet/weight to keep the tire install going.

[@electronicscootersthanet6360]

great to hear it 😊

[@Drippinonthedroop]

Did you need a bent stem or straight?

[@ThomasOsaki]

@@Drippinonthedroop the front tube valve will touch the wheel shell when fully inflated to spec. you can still insert a valve extender when you need to fill the tire again (or just deflate fully and refill with air after attaching extender). the holes need to be drilled in the proper spots so the valve does not touch the front wheel fork. this video shows where the hole was drilled in the wheel shell, but I actually drilled slightly higher/closer to the center (where you see the lip in the shell).

[@DenverDeCoY]

Thank you so much for making this video! Main thing I hated about my AOVO pro was how horrible the ride quality was with these solid tires. I just got done doing this conversion and it rides 100x better! Cost me $40 and took maybe 2 hours since I am a pretty handy fella. Thanks again! You're awesome!

[@yunhai1918]

Hi! Do you mean it’s very vibrating to drive. Im having the Same problem but the return cost my of money. I also worried it’s too complex to change the tire. Don’t have any tools 😢

[@DenverDeCoY]

@@yunhai1918 yes, solid tires = lots of vibration. Also, it is NOT an easy job. It only took me a few hours because I have tools and experience working on cars/bikes/motorcycles.

[@jonbrooks4376]

Dang ​@DenverDeCoY ! That's one way to kill poor ​​@yunhai1918 dream of a smooth ride. Lol. Will the wheels already on the AOVO pro hold tires + tubes? What are some tools you feel make the job easier that are not shown in the video? It would be a much greater help if there was commentary. I sure hope there is 8.5" tubes that have liquid patch/fix a flat. If it takes that much time to switch out tires that would definitely be some help. Some of these bumps are so bad it shakes my eyes so much it's blur to see.

[@arafathossen393]

​@@DenverDeCoY😅

[@tomkaavelo8632]

Can confirm that this works. The key is to heat up the tires when removing and installing as well as soapy water...this will make the job sooo much easier. For mine, i had to get the tire valve extension for the front wheel as the valve on the inner tube was too short when poking put outside the wheel to place a pump socket onto it when inflating.

[@ericm8811]

Hey Electronic Scooters Thanet! Where do the conductive metal shavings that end up inside the motor cover go? Not a good thing to have loose inside an electric motor!

[@allaboutskills2712]

Finally found this vid. Coz i want to change my tire into air filled . To bumpy with does solid tires. I need to upgrade the suspension 😮 but overall AOVOPRO was good enough

[@SamPeers1]

I upgraded to 10” air tyres and what a massive upgrade to ride quality!!!

[@MarioBeatricePv]

10" Can be mounted ? 😲 Can you tell me model and how? Thanks bro

[@SamPeers1]

@The Flyte this is because the tyre is 150mm and the tyre is probably 155mm so it doesn’t sit flush or one side always doesn’t quite pop up, giving a wobble. I got past this by using a bobbin sander to open up the inside of the tyre just enough so it sat right. I have since got some better tyres that fit properly. Also i kept getting inner tubes splitting on the rim side and that was due to the large gulley causing the inner tube to stretch in the area. I filled it with dense sponge. Been perfect since

[@electronicscootersthanet6360]

@The Flyte when the tyre doesn’t sit right let it down massage it a bit or use a lever to pull it up a bit then use washing up liquid to help seat the tyre when you pump it 👍🏻

[@electronicscootersthanet6360]

@The Flyte 8 1/2 x2 tyres and tubes (Xiaomi ones cst are the best )

[@yunhai1918]

Hi thanks for the suggetsion❤ do you have the link for that?

[@Aj_dizzy]

How to change the 350w to 500w motor?

[@redroomgaming]

I’m stuck on the back tyre as I can’t get the reflectors off

[@danyalhanis5101]

Can I drill a hole around anywhere along the lines you did it? On the motor cover

[@electronicscootersthanet6360]

Sorry for The late reply been very busy If you take the tyre off you will see the hole already in the wheel hub and also if you take the cover off you will see the hole and it will give you a idea where to mark and drill the hole 👍🏻

[@chrishzk9532]

@@electronicscootersthanet6360 do you have a picture about that ?

[@forestboi1957]

Is there a link to these newer tires?

[@electronicscootersthanet6360]

myBESTscooter - 8.5 inch CST Rubber Pneumatic Tire For Xiaomi M365 1S Essential Pro Electric Scooter amzn.eu/d/3WZrJVo

[@chadbradentube]

I'm a little confused because you show a 90 degree valve extension in one shot and then in the other the valve is just barely sticking out past the wheel cover. Could you explain this a little better? Thanks!

[@electronicscootersthanet6360]

Yes the valve extension is used to hold the tube in place when I fit the tyre and stop the valve popping back in and to pump the tyres up as my pump doesn’t fit otherwise.

[@chadbradentube]

Thanks, I get it! Do you have a link for the 10" conversion kit?

[@electronicscootersthanet6360]

@@chadbradentube you can search eBay or Amazon for Xiaomi 10 inch extension kit 👍🏻

[@stevenaustin2860]

i can see you have put the soft tyres on im doing that next what difference does it make

[@electronicscootersthanet6360]

Its so much better not only for comfort for yourself but it protects your scooter from the vibrations. Personally I would fit 10x2 tyres using the 10 inch extension kit for kick stand and fender. They are even better and so easy to fit 👍🏻

[@chrishzk9532]

​@@electronicscootersthanet6360 Hi last year i was searching for a video like your's but didn't find any. Thanks for making this Guide itwas realy a needed one, i would love to see an updated video about the 10inch tyres and extension kit,(if we do change it change it for the best right ? :D ), also please consider using affilated links so you can earn a commison from our purchases!

[@electronicscootersthanet6360]

@@chrishzk9532 Hiya thanks for the awesome comment! I shall do a video of a 10 inch conversion with the extension kit asap. 🛴🤘🏻

[@chrishzk9532]

@@electronicscootersthanet6360 im waiting for it :)

[@retring]

I lose warranty if I do this?

[@electronicscootersthanet6360]

I don’t see why it would effect it unless you damaged the scooter. But I couldn’t say for sure 👍🏻

[@rickylindsey3402]

I've recently purchased one myself. The 2024 model that is. I've written to go tracks with pneumatic tires prior to this purchase and I'm most likely going to be looking upgrade right away. Just for the ride quality. Do you have a link for the kit you speak of?

[@danyalhanis5101]

Hi mate you know where you drilled the hole on the motor bit, can i drill the hole in the same place you did it or shall i take the cover off first to see it

[@electronicscootersthanet6360]

Sorry had a busy time with home life … on this model the hole should be there under the cover so you can see the hole when you take the solid tyre off and align the drill to meet the hole on the inside with the one on the cover 👍🏻

[@venomga5576]

What website did you get the wheels on bro please tell me

[@electronicscootersthanet6360]

These are CST tyres 8 1/2 x 2 inch tube is same size They are for Xiaomi as same size wheel. If anything it will increase battery life slightly.

[@electronicscootersthanet6360]

@The Flyte hi mate the tubes electronic-scooters.co.uk/collections/tyres-brake-pads-discs/products/8-5x2-inch-innertube-for-xiaomi-aovo-pro-and-i-scooter-e9-models The tyres- electronic-scooters.co.uk/collections/tyres-brake-pads-discs/products/8-5-inch-outer-tyre-needs-inner-tube There are some good deals on Amazon also 👍🏻

[@justin-fs2br]

What tyre do i buy ?

[@jonasrebneris4771]

Hello. What extension you using for front wheel?

[@electronicscootersthanet6360]

Hi sorry please explain what you mean by extension?

[@electronicscootersthanet6360]

The extension kit is for the 10 inch tyres I put the standard 8 1/2 x2 on this 👍🏻

[@rickylindsey3402]

​@@electronicscootersthanet6360I'm referring to this particular comment right here

[@electronicscootersthanet6360]

@@rickylindsey3402 Hi please im not sure I understand… could i ask what is it I can help you with ?

[@rickylindsey3402]

@@electronicscootersthanet6360 my apologies. Which tire/ tube did you choose when you upgraded yours from solid tires. It's an upgrade I prefer to do soon once I receive it. Just need to know so I can go ahead and order em is all !

[@Lippalakki]

Very nice mod imo. I think i have to do that to my aovopro as well. Have you had any problems with driving pneumatic tyres? Im just wondering if its leaking water directly to the engine when driving in rainy weather.

[@electronicscootersthanet6360]

Actually the hole is already in the front rim just not the hub cover. I don’t see any problems as it’s sealed but could always use some black silicone around the edge of where you make the hole in the cover to be sure 👍🏻

[@Dubelectroify]

​@@electronicscootersthanet6360did you start with a bent valve inner tube on the front?

[@MR-ou2nv]

What do you use as lubricant

[@DenverDeCoY]

I just completed this mod using a squirt bottle with dish soap and water in it.

[@WRCH89]

Gracias. Fue de gran ayuda. Ya hice la conversión en el mío

[@junjam3175]

Using 8.5mm not to big?

[@sh4branze]

Wouldn't it set the wheel out of balance?

[@electronicscootersthanet6360]

No it’s fine just same as a Xiaomi 👍🏻

[@ThomasOsaki]

there's nothing to balance when a wheel is this small

[@Elnuevo]

Hola tengo problema com mi patenete

[@electronicscootersthanet6360]

Please can you translate? I am having trouble using google translate it’s not making sense. Thanks

[@electronicscootersthanet6360]

What is the problem you are having and I have another video that has some aovo error codes explained.

[@MahiEurope]

Helpful👍

[@venomga5576]

What website do I use to get these and does it affect the battery?

[@venomga5576]

Please can you tell me I’m thinking about getting these air soft tires for my ES

[@electronicscootersthanet6360]

These are CST tyres 8 1/2 x 2 inch tube is same size They are for Xiaomi as same size wheel. If anything will increase battery life slightly.

[@mzakzm8239]

Link for the wheels ?

[@electronicscootersthanet6360]

Hiya the wheels are same I just drilled them to fit inner tubes 👍🏻

[@mzakzm8239]

@@electronicscootersthanet6360 oh yes so all I need is the tires and valve that’s fits the holes and it should be fine?

[@electronicscootersthanet6360]

@@mzakzm8239 yes that’s right 🛴👌🏻

[@mzakzm8239]

@@electronicscootersthanet6360 is there anything else needed for the conversion like inner tub drilling holes etc?

[@electronicscootersthanet6360]

@@mzakzm8239 Just the drilling and tyres and tubes 👍🏻🛴

[@allaboutskills2712]

But someone said honeycomb tires was better ! No need for air filled tube! Solid tires was suck! The vibration when you hit the rough road is from head to toe 😂

[@electronicscootersthanet6360]

Yes totally agree I don’t recommend solid tyres over air tyres. Personally it makes my vision blurry on a solid tyre from the vibrations sometimes 👍🏻

[@electronicscootersthanet6360]

Yes totally agree I don’t recommend solid tyres over air tyres. Personally it makes my vision blurry on a solid tyre from the vibrations sometimes 👍🏻

[@Mobile_Gamer707]

Don’t try this everyone in the comment if you have no idea what you’re doing!😂😵

[@DenverDeCoY]

It's not an easy job, wrestling the tires on and off is a bitch. I completed this job in roughly 2 hours but I know how to work on shit 🤣🤣

[@RealAndrewBlack]

Getting flats regularly is not an upgrade.

[@electronicscootersthanet6360]

Of course with solid tyres you don’t get flats but the solid tyres not only are such a horrible riding experience the vibrations end up causing issues to the scooter. If you look after your tyres and pressure you shouldn’t get so many flats 👍🏻 or go tubeless even better 👌🏻

[@cpr1087]

bye bye warranty

[@franksmith7271]

I might do this in the future, but you bet I’ll be carrying a can of fix a flat with me.