AOVO PRO - ERROR CODES

A video about the aovo pro error codes what they are and what they mean!
E3 - miscommunication (controller or display is faulty)
E4 - over current to motor
E7 motor hall
The lines that’s flash is the throttle or brake .

[@victorgraca9267]

Thanks for this. Had my throttle stuck by the grip, and was giving the error. You saved my Aovo..

[@welshrcshorts]

what does it mean if your scooter turns itself on once an hour

[@electronicscootersthanet6360]

Maybe water damage to The display board.

[@welshrcshorts]

@@electronicscootersthanet6360 how do i fix this?

[@rockyourboat1314]

I just bought mine and it's not connecting to Bluetooth on any app

[@electronicscootersthanet6360]

Where did you buy it from ? And was it new ? You have tried the aovo pro app ?

[@Afriendinhand]

Bro how do i get them lines off my screen, i got e2 2days ago?

[@MateoCastro-c2i]

My scooter will charge but won’t turn on

[@emrahcokaj5822]

hello I wanted to ask you if you could make a video on the avopro since you understand it you know the birth where it is needed to fold it to me it loosened you can make me a video

[@electronicscootersthanet6360]

I have actually made a video on this recently I will upload it soon

[@declanm2017]

What's error code e 3

[@electronicscootersthanet6360]

It is controller or Display malfunction it means miss communication. It’s hard to say which one or it maybe the wiring in between is damaged. One thing you can do is check the display for any water damage or corrosion

[@Natano-vc1nq]

I have e16 error how I can fix it

[@IamAlive-mt1yu]

Mine don’t even come on?

[@Clips_on_you_X_X]

Wat is Errol code E7

[@potatogaming1584]

What does i7 mean?

[@outofourheadsstudios3177]

I've had error code F2 come up any ideas what that means?

[@electronicscootersthanet6360]

Is this not a E2 ?

[@outofourheadsstudios3177]

@@electronicscootersthanet6360 unfortunately not, the whole display is still functional as it popped up once since the code

[@electronicscootersthanet6360]

@@outofourheadsstudios3177 sorry been very busy did you get it sorted ( if you hold the brake down or the throttle does it still display a F code ) I’m just wondering if it’s the display not showing one of the lines of the E ) if it does the spinning lines try unplugging the motor to see if it display E7 or F7 . 👍🏻

[@outofourheadsstudios3177]

@@electronicscootersthanet6360 no worries I appreciate your reply💪 I did get it to power on once and the whole display was working so I'm assuming that's ok. I've tried the break and accelerater too but it doesn't change anything unfortunately. I'm completely stumped

[@electronicscootersthanet6360]

@@outofourheadsstudios3177 sorry I didn’t say if you turn it off then keep the brake held down whilst turning it back on what error does it display? It will be either the lines going around or a E1

[@PrayerMusic]

F2?

[@sub123lol]

What if when your driving it and you brake then you try to drive it again but it doesn’t work and the light at the back for the brakes keep flashing please I need answers I just got it last night and I think I broke it

[@electronicscootersthanet6360]

It sounds like the brake sensor is stuck on. When you turn it off and on do you get the flashing lines or an error code ? Is the brake lever moving all the way back to its original position and not getting stuck ?

[@sub123lol]

@@electronicscootersthanet6360 it’s not stuck but when I on and off it no erro code be on the screen but I just got it yesterday

[@sub123lol]

@@electronicscootersthanet6360 and yes it is all the way up

[@kyrolmao4933]

did you ever find out how to fix this it’s happening to me

[@nelsonelbara]

Es el sensor de freno tienes que desconectarlo para que ya no esté parandote

[@earldaley2403]

Hi, My Aovo wont turn on and it has a "P" error on screen. Any suggestions? Thanks

[@electronicscootersthanet6360]

It means it’s locked by the app

[@tahayt6142]

​@@electronicscootersthanet6360 I have same thing but mine turns on but then I turn it off its shows P and then sometime it don't turn on then I have to charge it help me out

[@sixgamingz6655]

Hi, i got a scooter this same scooter from a friend. He said he pushed the throttle too hard then the code was showing, He could not bother to fix it since he has ebike and told me i just need to change the throttle only but then i took it to a bike shop who deals with escooters/ ebike for them to change the throttle and after few days they said they are not sure what this code is so they gonna put it back and i should go and take it to a specialist for this scooter. So how do i fix this? I even tried to get help from aovo support but they dont answer there email somehow.

[@electronicscootersthanet6360]

What code isit that you get mate?

[@sixgamingz6655]

@@electronicscootersthanet6360 its the exactly the same as the one on your video

[@electronicscootersthanet6360]

@@sixgamingz6655 hiya the flashing lines is definitely a throttle or brake issue on a aovo pro. Based on what your friend said it makes sense that it’s the throttle also. Is the throttle visually damaged?

[@sixgamingz6655]

@@electronicscootersthanet6360 yh i replaced it and now its working

[@electronicscootersthanet6360]

@@sixgamingz6655 awesome 👏

[@CaptBackwards]

I have aovopro electric scooter and I'm getting a F2 error code! What does that mean?

[@fabianwohlfart405]

you found out? i got the same problem

[@osaunommm51]

@@fabianwohlfart405same

[@jaystrongwater8029]

​@@fabianwohlfart405 that means your throttle is fucked. Mine rides without using the throttle, due to the F2 error.

[@S.chxw123]

What does uf mean on scooter display

[@bossman4025]

uf= you fud. Basically your scooter is calling u a fud.

[@jarosawgargas8879]

I have an error f2. what should I do ?

[@electronicscootersthanet6360]

Definitely not E2 ?

[@zj7396]

Me too

[@fabianwohlfart405]

you got it fixed? got the same problem

[@bensudworth7141]

I’ve got a reel performance was working went to work in rain then went to go home wouldn’t power up so plugged charger in then it powered up but beeping and flashing 04 and only powers on when on charge but won’t fully charge

[@electronicscootersthanet6360]

I would say it’s battery related does it have solid tyres ? The battery likely has a loose connection on one of the terminals but hard to say without seeing it Have you checked the battery voltage?

[@sebastianjung95]

Damn mine wont even do that. I hold the brake and it turns off and on like normal. It turns on fine but randomly the battery drains and shuts off. Only saw e3 once but never showed again. I cant fix a problem i dont know about sadly

[@1234mattyman]

What is E3 code problem with aovo pro electric scooter. This comes on without me turning on the scooter

[@sergiuh1400]

I am getting e7 i don’t know how to fix.

[@nordinr]

Hi my aovo scooter when i drive with it then in like 1 minut it stops riding en the screen gets black can u help me

[@electronicscootersthanet6360]

It is likely a loose connection in the battery it would need checking over to make sure if not then it maybe the controller. 9/10 times of You turn a scooter on and it goes straight off its a loose terminal in the battery pack .

[@eddieriley14]

What's E3

[@munlovescarti16]

mine says e6

[@user-kp2yb9ho8x]

What is the e3

[@electronicscootersthanet6360]

Miss communication it’s either the controller box or display but always check wiring first

[@virginiadorado590]

​@@electronicscootersthanet6360hii.. e3 error.. for 4 days.. what can I do?

[@Blerog]

Yo bro i have the same problem ot charges but give these to lines going up and down what is the problem

[@electronicscootersthanet6360]

Lines on the screen is throttle or brake Sorry for the late response I have been having a break from YT but I am coming back with more videos shortly.

[@rachelhudson3684]

My one sais e2 on it it's so annoying don't have a clue how to fix any tips

[@electronicscootersthanet6360]

Yes it’s the throttle buddy E1 - brake E2 - throttle

[@kadernombre3549]

Hi l got the same problem aovo pro scooter please need help 🙏

[@electronicscootersthanet6360]

Hi what is the problem you have ?

[@amy7715]

I have the lines on my screen, replaced the throttle, how do I get rid of the lines now it's fixed?

[@Pendu_real1]

On the app I can't change the speed it just stays at 25kmh even if I try make higher or lower just resets

[@belle194]

Hi, im having some problems with my scooter. Ive tried replacing the battery, light and control module but its still not working! 😢 we"re getting E3 error code on the new module and the back light flashes on and off. Any ideas? Thanks

[@louistiloup]

Aovopoor

[@GahDayuumm]

I have a E3 error

[@jayaprakashakhil1555]

me too my display not working

[@Solokiis]

@@jayaprakashakhil1555 did u fix it ??

[@vanessapinto1207]

When I reset is showing in screen F2 and scooter just go 15 mph, can someone help ??

[@nathanielwilliamson8606]

I get the E3 error code, whys that?

[@fib297]

I identified it as water damage or controller damage

[@jayaprakashakhil1555]

@@fib297 Hi can you tell how to solve the issue. I got same error for few days. After that my display power button not working, I am unable to power on. Please help me;

[@Solokiis]

@@fib297definitely water damage but how would i fix that ?? Do i just get a replacement for what might be damaged??

[@evolvic6784]

Hello , my scooter gives power to the wheel but the wheel turns as if it was fully rusted . It shows error 50 or erro 04 . Not always the same error

[@JamieRobinson-j1p]

Hi mate me AovoPro has a e7 error do u know how I would fix it please

[@kawippa1733]

E3 what do I do

[@electronicscootersthanet6360]

It is a controller or display issue

[@cristiverestiuc-gc1vk]

​@@electronicscootersthanet6360 la mine le-am schimbat și controlorul și bordul și accelerația și tot E3 arara

[@darkcrew-ld1rs]

I need 88 it says

[@Millzieeeee]

wondering if you know what the flashing accelerator icon means please

[@Millzieeeee]

answering my own question incase anyone wants to know, its the cruise control on

[@electronicscootersthanet6360]

@@Millzieeeee yes it’s cruise control 👍🏻

[@jimmann-n8c]

is a throotle thing error e7 codes our a moter thing

[@tjun81]

I have error code F2. You know what it is?

[@owaiskhan1579]

How do I repair the flashing one I replaced the throttle before

[@electronicscootersthanet6360]

It can be brake or throttle so it will be just the brake with sensor that needs replacing.

[@owaiskhan1579]

⁠I already Changed the brake before iswl should I check the wire could u respond with a video plwase

[@MikeLaughton-d7z]

What does the red circle mean with an s in the middle of it mean

[@gameplayer2105]

I blocked my scooter only show P and i cant unlock please help me

[@JamieRobinson-j1p]

Hi mate my scooter shows f2 do u know how I would fix it

[@Alexandniko12]

Same just hapened to mine It wa the motherboard for lcd there 20pound on Amazon

[@electronicscootersthanet6360]

Hi mate the F error codes are strange as I have not seen a F code before I presumed it was a E2 but with the bottom line of the e missing. E2 is throttle.

[@S.chxw123]

Ive got e7 so how do i fix ?

[@electronicscootersthanet6360]

E7 can be the motor cable where it connects check the pins are ok. If not the it is likely a hall sensor issue in the motor .

[@Haloitzchris]

I got the ook tek v10 and I got the e4 error code and don’t know how to fix the throttle can u help me out asap !?

[@rxey5181]

E2 what do i do?

[@numaanvoraji51]

what dos e4 mean

[@electronicscootersthanet6360]

Sorry actually e4 is listed as motor over current Check the motor wires for damage / touching/ twisted where they enter the wheel or corrosion Could be motor side or controller possibly but hard to say without seeing it

[@patch1022]

part 2 please

[@nadiacastro6956]

What's the e5 Code error for?Aovo pro

[@uda-ru8zq]

Bro can you demo error e10

[@HEDST8]

My sons scooter is showing f2 which is a aovopro and all the error codes I can find online show e as a error.

[@Alexandniko12]

Problem with the motherboard no have got rid of the motherboard and brought a new one 17£ non amazon

[@luisbrachi9000]

My scooter start to go down the speed by himself and he turn the red light intermittent and then i can’t accelerate what is that

[@electronicscootersthanet6360]

Does Your battery bars drop at the same time to 1 red bar ?

[@luisbrachi9000]

No, the battery is normal

[@luisbrachi9000]

I got videos u got email?

[@arnisahmeti6764]

@@electronicscootersthanet6360 to my scooter is this thing what should i do? thanks

[@alexxyz7857]

Does aovo pro esmax 500 have rest button anywhere

[@terireynolds22]

What does e7 mean please

[@electronicscootersthanet6360]

Motor hall sensor error - first check the motor cable for any damage also check the pins on the connector for any damage or corrosion. When you try and spin the motor wheel by hand does it have resistance or it spins freely?

[@terireynolds22]

Does that effect the charging port because its not charging either ?

[@electronicscootersthanet6360]

@@terireynolds22 not charging is a common issue but separate I do have a video on the issue and fix

[@PalestineWillBeFreeInshaAllah1]

@@electronicscootersthanet6360 How do i fix this issue?

[@electronicscootersthanet6360]

@@PalestineWillBeFreeInshaAllah1 sorry I’ve been away from YT for a while What is the problem your having?

[@yasingaming2948]

i got this error and i cant fix it

[@mr.makeshift68]

so E7 is the motor what about E3? i got an E3 error on my misses' one but i cant find a definitive answer online as to what exactly is the issue.

[@1234mattyman]

I get e3 error code and looking for a fix any luck??

[@NorbiDrafi]

Mine is showing like 2 E’s

[@anilkaraca1767]

E5 what is that for

[@markherman999]

Do u know how to sort the button out its always pressing by itself plz

[@V_7688]

What to do when I charge it and the adapter turns green but when i ride it for 1 minute it shuts off saying the battery is dead and then I charge it and the adapter turns green again and the scooter says it’s full.

[@electronicscootersthanet6360]

Does it go green right away ? Does the screen say it’s full when you turn it back on ? Normally when it goes off like that indicates a battery issue it could be something as small as a loose terminal or could be a bad cell. But it would be hard to say without going over it .

[@V_7688]

@@electronicscootersthanet6360 yeah within 2 minutes or so it turns green. The battery is definitely not defect it probably is indeed a loose cable or something like that or problems with the voltage to the motor.

[@electronicscootersthanet6360]

@@V_7688 have you got a multi meter to check battery voltage? You could check it first then when it cuts out again quickly check the battery voltage again. In the battery pack it has nickel strips holding all the cells together it maybe one of them has come loose or the balance wire has broken contact.

[@V_7688]

@@electronicscootersthanet6360 no I don’t have that, but thank you very much for your time i appreciate it. I know more now what i can do thank you very much.

[@anonimofied]

i need to wiggle the charger plug to make it charge otherwise its green and wont charge proberly

[@margorzatamoth8846]

Czy da się zrobić hard reset tej hulajnogi? Dzieci zaktualizowały oprogramowanie złą aplikacją, co spowodowało zablokowanie silnika (prawdopodobnie problem z czujnikami Halla)

[@HunxwhoBaun-jb3ln]

E0?

[@harryshaw9253]

I'm getting e16 what can I do to fix it

[@electronicscootersthanet6360]

Is it an aovo ?

[@harryshaw9253]

@@electronicscootersthanet6360 yeh

[@electronicscootersthanet6360]

@@harryshaw9253 bare with me il try and find out as I am not aware of this error code.

[@frankieandsonictoys8968]

My scooter keeps flashing F2 as mentioned on others comments, the break light is constantly flashing and when the scooter is powered up it has resistance as if the break is on when I'm not holding the break, it pushes smoothly when its turned off. Please can someone help? 😢

[@alipsheep216]

Bro it’s the same thing for me. Today I just got the F2 error and I’m trying to fix it. But for the past two days it has been randomly braking and the tail light was flashing. The only way I could ride it was if I closed the scooter and turned it back on. Now I can’t ride it at all.

[@avoiid_shaheen95]

how can i fix e4 please?

[@alesbrain4185]

please tell me, the zamelux e9 scooter, when turned on, the size flashes but does not react to the throttle and brake handles, what could be the problem?

[@lakieapickett5264]

What does F2 mean? Help

[@jestemsoba7124]

Did you fix this problem?

[@minihulk4563]

Everytime i turn mine on, it shows the letter P and idk what to do.

[@maisonhughes8261]

Bros got it in park mode get the app turn jt of

[@minihulk4563]

​@@maisonhughes8261This is where I feel retarded AF. I have the app and I can't figure it out 🥲

[@luisbrachi9000]

What is means the green and red light in top of the speed when u’re riding

[@electronicscootersthanet6360]

It’s the speed modes red is fastest (sport mode )

[@luisbrachi9000]

@@electronicscootersthanet6360 i don’t mean that ones i mean the bars red and green

[@electronicscootersthanet6360]

@@luisbrachi9000 not the Little ones that flicker above the battery bars ?

[@isaafzal9423]

What does it mean if your scooter battery icon goes up and down?

[@mandykenny1348]

What does it mean when my scooter is not charging and it blinks 53 it's been staying on one bar aovo Pro scooter would be charger or battery or something else

[@electronicscootersthanet6360]

Is that the The battery bar goes up and down ? If it drops by 1 bar then goes back up 1 it’s just voltage drop. But if it goes right down and back up it’s likely a issue with the battery.

[@electronicscootersthanet6360]

@@mandykenny1348sorry for the late response if the charger is not charging the battery it is likely the battery issue that I posted a video for where the charging cable comes loose ? I am guessing that 53 means under voltage

[@cristiancretan5305]

What's the e3 Code error for? Aovo pro

[@jayaprakashakhil1555]

me too getting the same error and now the button is not working. Anyone please help

[@mobed_Jac]

Its the cablse thats going upp to the display so just open the Scooter Up and check the cablse thats going to the display

[@mathieusebastien4529]

Good question

[@harjindersinghchouhan354]

My aovo is not working .Battery is fine. 37 voltage. When pressed the button secreen on ,headlamp on,but motor not working. Help

[@kabirahmed4754]

Exact same happened to mine its probably because the red wire on the break is burnt out from touching the back tire

[@electronicscootersthanet6360]

Do you have no error codes ? if you hold the throttle down and turn it on do you then get a error ? does the motor wheel spin freely when you try with your hands ? thanks

[@morganscott6817]

@@electronicscootersthanet6360 I have E7 then E2 coming up on mine

[@morganscott6817]

@@electronicscootersthanet6360 how do I fix this

[@MK-cj2po]

@@morganscott6817 same I get e7

[@faizan5739]

Need help ASAP my scooter got e3 and now when I try accelerate I can't move it just vibrates like mental

[@electronicscootersthanet6360]

Sorry for the late reply I have been away from YT E3 is a miss communication but from what you described it sounds like controller or motor issue

[@jayaprakashakhil1555]

@@electronicscootersthanet6360 I got e3 error and display power button not working, please help me

[@victorgraca9267]

Wonder if there is any way to get more speed from the AoVO. The firmware downgrade no longer works. And not sure about the shunt mod. Any ideas?

[@ary2k751]

Hi what is you mas speed is 30 km/h right?

[@electronicscootersthanet6360]

unfortunately not you cannot increase the speed due to limited software you can do dual motor set up though ...

[@electronicscootersthanet6360]

19Mph / 31 kmh I believe

[@RagezTK]

I got e7 how do I fix

[@electronicscootersthanet6360]

First check the connector for the motor isn’t loose and the pins inside are not bent or blown. Check The wire for the motor for any signs of damage especially where it goes into the motor for a twisted cable. Was there any events that’s caused the error ?

[@RagezTK]

@@electronicscootersthanet6360 no, no events led to this happening and thank you for the advice

[@electronicscootersthanet6360]

@@RagezTK if all looks fine on the connections it will likely be the hall sensor in the motor a fairly easy fix for a repair shop but a bit technical for a DIY job. The motor has three hall sensors and is likely one has become faulty or one of the legs of the sensor detached. Does the motor spin when you turn it with your hands ? Hope this helps 👍🏻🛴